YAB type liquid ammonia chemical pumpDetailed product description：

The YAB type liquid ammonia pump is the latest product developed by our company based on the analysis and research of similar foreign products. It is mainly used for transporting volatile liquids with similar properties such as liquid ammonia, ammonia water, methanol, dimethylammonium, epichlorohydrin, crude benzene, epoxyethane, chloromethane, isobutene, butadiene, etc. It is widely used in the fields of gas, petroleum, chemical, pharmaceutical, metallurgy, etc. The pump seal ring and slide are made of special foreign formulas, with high wear resistance, toughness, and strength. The material of the pump shell is high-density wear-resistant alloy cast iron, which has high smoothness after processing, ensuring that the ammonia liquid does not leak. The characteristics of the pump are good sealing, high pressure, and stability.

The significance of YAB type liquid ammonia chemical pump model
YAB15-5
YAB - Liquid Ammonia Pump
15- Boosting range (inlet and outlet pressure difference)
5- Rated flow rate of pump (m3/h)

working principle
This pump is a positive displacement vane pump, which operates by centrifugal sliding of the blades. The flow rate is related to the shaft speed. The inner surface of the stator is made of a domestically unique composite curve, and the stator, rotor, baffle, and blades form ten sealed chambers. Due to the composite curve of the stator surface, when the rotor rotates, the volume of the inlet chamber gradually increases, and negative pressure is formed to generate suction, thereby sucking in ammonia liquid. After the rotor rotates a certain angle, the volume gradually decreases, thereby squeezing out the ammonia liquid. There is an oil seal block between the oil suction chamber and the oil pressure chamber to separate them. The blades rely on centrifugal force and two baffle structures to tightly fit with the inner curvature of the stator, allowing the pump to operate normally at rated conditions.

model	Speed n	Traffic Q	Pressure difference Δ P	Work pressure P	Supporting motor model	Power N	Entrance diameter inch	Export diameter inch	Temperature range ℃
YAB2-5	600r.P.m	2 m3/h	0.5MPa	2.0MPa	YB90L-4	1.5KW	one	one	+40 -40
YAB5-5	780r.P.m	5 m3/h			YB100L-4	2.2KW	one point two	one point two
YAB10-5	600r.P.m	10m3/h	0.5MPa	2.0MPa	YB132S-4	5.5KW	two	two	+40 -40
YAB15-5	780r.P.m	15m3/h
YAB15-5A	780r.P.m	15m3/h	0.4MPa	2.0MPa	YB112M-4	4KW	two	two	+40 -40
YAB10-5A	600r.P.m	10m3/h
YAB25-5	600r.P.m	25m3/h	0.5MPa	2.0MPa	YB160M-4	11KW	three	three	+40 -40
YAB35-5	780r.P.m	35m3/h
YAB50-5	600r.P.m	50 m3/h	0.5MPa	2.0MPa	YB160L-4	15KW	four	four	+40 -40
YAB60-5	780r.P.m	60 m3/h	0.5MPa	2.0MPa	YB160L-4	15KW	four	four	+40 -40
YAB80-5	780r.P.m	80 m3/h	0.5MPa	2.0MPa	YB180L-4	18.5KW	four	four	+40 -40

YAB type liquid ammonia chemical pump