The CN1DP-MC communication adapter is a simple and practical protocol conversion adapter, mainly used in our company's communication intelligent products with standard RS485 interfaces, to achieve the conversion from Modbus RTU protocol to CAN, enabling our company's communication intelligent products to achieve remote signaling, remote adjustment, remote control, and telemetry functions on the CAN fieldbus. The connection method between CN1DP-MC communication adapter and equipment is one to many, but the adapter and electrical equipment are generally connected in a one-to-one manner, and one adapter can also connect up to 32 devices.
The adapter refers to the following standards:
ISO 11898 (all parts) Road Vehicle Control Surface Network (CAN)

2. Normal usage conditions
The ambient air temperature ranges from -10 ℃ to+60 ℃;
The storage and transportation temperature range is -40 ℃ to+85 ℃;
The altitude of the installation site shall not exceed 2000m;
The relative humidity of the air at the installation site should not exceed 50% at a maximum temperature of+40 ℃, and higher humidity is allowed at lower temperatures, such as reaching 90% at 20 ℃. Special measures should be taken for occasional condensation caused by temperature changes;
The pollution level is level 3;
The protection level is IP20;
The installation method is 35mm standard DIN rail installation.

CN1DP-MC Communication Adapter