HL-600 Leeb hardness testerDetailed product description：

Main functions of HL-600 Leeb hardness tester

Can test multiple materials
Small size, light weight, very suitable for on-site inspection
Unrestricted testing direction
Printable test results
Data can be modified at any time
Automatically detect battery voltage, low voltage prompt
The large screen can display multiple parameters

Technical parameters of HL-600 Leeb hardness tester

Measurement range: (170-960) HLD, (17.9-69.5) HRC, (19-651) HB, (80-1042) HV, (30.6-102.6) HS
Measurement direction: Supports 360 degrees (vertical downward, oblique downward, horizontal, oblique upward, vertical upward)
Measurement materials: steel and cast steel, alloy tool steel, stainless steel, gray cast iron, ductile iron, cast aluminum alloy, copper zinc alloy (brass), copper tin alloy (bronze), pure copper, forged steel
Hardness standards: Leeb (HL), Brinell (HB), Rockwell B/C (HRB/C), Rockwell A (HRA), Vickers (HV), Shore (HS)
Display: Dot matrix LCD, 128 × 64 graphic dot matrix LCD
Data storage: up to 500 sets (impact times 32-1)
Thermal printer, working quietly, can print any number of test results, meeting the needs of the site
Printing paper width: (57.5 ± 0.5) mm
Printing paper roll diameter: 30mm
Working voltage: 6V nickel hydrogen battery pack
Charging power supply: 9V/500mA
Charging time: 2.5-3.5 hours
Continuous working time: about 150 hours (without printing or backlight)
Communication interface standard: USB1.1
Applicable materials: steel and cast steel, alloy tool steel, stainless steel, gray cast iron, ductile iron, cast aluminum alloy, copper zinc alloy (brass), copper tin alloy (bronze), pure copper, forged steel
Working conditions:
Environmental temperature: Operating temperature -10 to+50 ℃
Storage temperature: -30 ℃ to+60 ℃
Relative humidity ≤ 90%
There is no strong vibration, strong magnetic field, corrosive medium, or severe dust in the surrounding environment