JBY-T/TQ Integrated insulated span clampDetailed product description：

The JBY-T/TQ integrated insulated span clamp adopts the process of injection molding the span clamp body and insulation shell as a whole, which is more convenient for installation and suitable for non load bearing connection and branching of overhead insulated lines of 10kV and below. It is an ideal substitute for traditional parallel groove clamps with insulation covers. The JBY-TQ copper aluminum span parallel groove clamp adopts brazing technology, which has higher strength and is suitable for the transition connection of copper aluminum wires.

insulation performance
Power frequency withstand voltage: ≥ 18kV withstand voltage for 1 minute without breakdown
Electrical resistivity:>1.0 × 1012 Ω· cm
Environmental temperature: -300C~900C
Climate resistance: Good performance after 1008 hours of artificial climate aging test

JBY-T/TQ integrated insulation span clamp model specifications and technical parameters

	model	Applicable wire nominal cross-section (mm)	nut	Stripping length (mm)	Nominal interception
Aluminum span	JBY-16~150T	16~150	2×M8	seventy	450A
	JBY-50~240T	50~240	2×M10	eighty-five	670A
Copper aluminum span	JBY-16~150Q	16~150	2×M8	seventy	450A
	JBY-50~240Q	50~240	2×M10	eighty-five	670A

Note: The meaning of the letters and numbers in the table for the model is: J represents continuity; B represents parallel communication; Y represents diameter reduction; The additional letter T represents unity, Q represents brazing