CDP Series 0.1Hz Intelligent Ultra Low Frequency High Voltage GeneratorDetailed product description：

The CDP series 0.1Hz intelligent ultra-low frequency high voltage generator combines modern digital frequency conversion advanced technology, adopts microcomputer control, and fully automates voltage boosting, voltage lowering, measurement, and protection. Due to full electronicization, it has a small size, light weight, large screen LCD display, clear and intuitive display, and can display output waveforms and print test reports. The design specifications fully comply with the power industry standards of "General Technical Conditions for Special Test Instruments for Power Equipment, Part 4: General Technical Conditions for Ultra Low Frequency High Voltage Generators", and are very convenient to use. Nowadays, both domestically and internationally, mechanical methods are used for modulation and demodulation to generate ultra-low frequency signals, resulting in non-standard sine wave waveforms, large measurement errors, spark discharge in the high-voltage part, bulky equipment, and high-power high-voltage resistors for discharge shaping in the second and fourth quadrants of the sine wave. Therefore, the overall power consumption of the equipment is relatively high. This product can overcome these shortcomings,

CDP series 0.1Hz intelligent ultra-low frequency high voltage generator features:
1. Current, voltage, and waveform data are directly sampled from the high-voltage side, so the data is accurate.
2. It has overvoltage protection function. When the output exceeds the set voltage limit, the instrument will stop for protection, with an action time of less than 20ms.
3. Equipped with overcurrent protection function: designed with high and low voltage dual protection, the high voltage side can be precisely shut down for protection according to the set value; When the current on the low-voltage side exceeds the rated current, a shutdown protection will be implemented, with an action time of less than 20ms.
4. The high-voltage output protection resistor is designed inside the boost body, so there is no need to connect another protection resistor externally.
Due to the use of high and low voltage closed-loop negative feedback control circuits, there is no capacitance rise effect in the output.

CDP series 0.1Hz intelligent ultra-low frequency high voltage generator technical parameters:
Measurement accuracy: 3%
Voltage positive and negative peak error: ≤ 3%
Voltage waveform distortion: ≤ 5%
Usage conditions: indoor and outdoor; Temperature: -10 ℃ to+40 ℃; Humidity: ≤ 85% RH
Municipal power supply: frequency 50Hz, voltage 220V ± 5%.

model	Rated Voltage	Load capacity	weight	purpose
CDP-30	30kV (Peak value)	0.1Hz,≤1.1µF	Controller: 4kg Boosting body: 25kg Size: Length * Width * Height 323*174*323	10kV cables, generators, etc
		0.05Hz,≤2.2µF
		0.02Hz,≤5.5µF
CDP-40	40kV (Peak value)	0.1Hz,≤1.1µF	Controller: 5kg Boosting body: 30kg Size: Length * Width * Height 357*208*343	13.8kV cables, generators, etc
		0.05Hz,≤2.2µF
		0.02Hz,≤5.5µF
CDP-50	50kV (Peak value)	0.1Hz,≤1.1µF	Controller: 6kg Boosting body: 45kg Size: Length * Width * Height 357*210*365	15.75kV cable, generator, etc
		0.05Hz,≤2.2µF
		0.02Hz,≤5.5µF
CDP-60	60kV (Peak value)	0.1Hz,≤1.1µF	Controller: 6kg Boosting body: 50kg Size: Length * Width * Height 357*220*370	18kV cables, generators, etc
		0.05Hz,≤2.2µF
		0.02Hz,≤5.5µF
CDP- 80	80kV (Peak value)	0.1Hz,≤1.1µF	Controller: 8kg Boosting body: 90kg Size: Length * Width * Height 357*240*390	35kV cables, generators, etc
		0.05Hz,≤2.2µF
		0.02Hz,≤5.5µF
CDP- 90	90kV (Peak value)	0.1Hz,≤1.1µF	Controller: 8kg Boosting body: 110kg Size: Length * Width * Height 357*240*390	35kV cables, generators, etc
		0.05Hz,≤2.2µF
		0.02Hz,≤5.5µF