The OGD type screw submersible electric pump consists of three parts: pump assembly, seal, and electric motor. The pump unit is located at the upper part of the pump, and its main components are the screw and rubber stator. The motor is a single-phase or three-phase asynchronous motor located at the lower part of the pump. A double end face machine seal is used between the water pump and the motor, and an "O" - shaped oil resistant rubber seal ring is used for static sealing at each fixed stop seal. The power frequency is 50Hz, the voltage is 220V for single-phase and 380V for three-phase, and the fluctuation range is 0.9-1.1 times the rated value

Main purpose:

The OGD type screw submersible electric pump is widely used for long-distance water supply irrigation, efficient oxygenation in aquaculture, deep well water lifting, urban and rural tap water boosting, mine water supply and drainage, and transportation of sugar syrup and non corrosive chemical liquids in the food and chemical industry, as long as it can work within the highest head range due to the limitation of head without a bottom stop point. It has high head, high efficiency, and wide high-efficiency zone.

Model Description: