HZ-892A Integrated vibration transmitterDetailed product description：

HZ-892A integrated vibration transmitter: used to measure the bearing seat vibration of various rotating machinery such as steam turbines, compressors, fans, and pumps. It is an active sensor that integrates a velocity based vibration sensor and transmitter, directly converting vibration velocity values (or displacement values) into 4-20mA outputs. It is small in size, has good anti-interference ability, and is easy to install.

The HZ-892A integrated vibration transmitter is used to measure the bearing seat vibration of various rotating machinery such as steam turbines, compressors, fans, and pumps. It is an active sensor that integrates a velocity based vibration sensor and transmitter, directly converting vibration velocity values (or displacement values) into 4-20mA outputs. It is small in size, has good anti-interference ability, and is easy to install. This transmitter can be directly connected to DCS, PLC or other systems, making it an ideal choice for vibration measurement of factory equipment such as fans and pumps.
Installation position: Install vertically or horizontally on the measured vibration point, and fix the bottom of the transmitter with M10 screws.
Technical parameters: Sensitivity: 20mv/mm/s ± 5%, 30mv/mm/s ± 5%, 50mv/mm/s ± 5%
2. Frequency response: 4.5-1000 Hz
3. Natural frequency: 10Hz
4. Measurement range options: 1. 0-10mm/s, 0-20mm/s, 0-50mm/s, 0-100mm/s,
2、0～100um、0～200um、0～500um,0-1000um,
5. Output current: 4-20mA
6. Output impedance: ≤ 500 Ω
7. Working voltage: DC24V
8. Maximum acceleration: 10g
9. Measurement direction: vertical or horizontal
10. Operating environment: Temperature -30 ℃~50 ℃, relative humidity ≤ 90%
11. Installation thread: M10 × 1.5
12. Dimensions: φ 35 × 75mm
13. Weight: Approximately 350g