KHJ24(B) Mining intrinsic safety emergency stop switchDetailed product description：

The KHJ24 (B) intrinsically safe emergency stop switch for mining is suitable for hazardous areas with explosive gas mixtures, as well as workplaces such as open-pit coal mines and coal preparation plants. This emergency stop switch is mainly used for parking along the line in the supporting electrical control device of underground belt conveyors in coal mines. It can also be used for parking along belt conveyors in steel plants, cement plants, thermal power plants, and port terminals.

Main parameters of KHJ24 (B) mining intrinsic safety emergency stop switch

Rated working voltage: DC24V;  
Action range: (5-10) mm.  
Action force: (40-200) N.  
Reset force: (6-30) N.  
Action direction: Horizontal in both directions.  
Action mode: Pull type.  
Action performance: When the switch is not under force or under force, the output normally open contact will disconnect and the red indicator light will turn off; When the switch reaches the action force, the normally open contact of the output is closed and the red indicator light is on. The above function can also be achieved by directly pressing/lifting the locking button.  
Action performance: The switch should immediately activate and lock upon receiving action force, and must be manually reset before unlocking.