GW5-40.5 outdoor high-voltage isolation switchDetailed product description：

The GW5-40.5 outdoor high-voltage isolation switch consists of the GW5-40.5, 126 (D) (W) type isolation switch body, CS17G or CS17G type manually operated mechanism, transmission accessories, etc. It can also be equipped with CJ6 type and other electric mechanisms.
The isolation switch belongs to the double column V-shaped horizontal opening type, and each single stage is composed of a base, a post insulator, an outlet socket, and contacts. It consists of two supports at a 50 ° angle, and the two post insulators are installed on the bearings at both ends of the base at an angle to each other, and are perpendicular to the base. The main electrical components are installed above the two pillar insulation porcelain bottles and rotate approximately 90 degrees with the pillar insulation porcelain bottles.

The copper braided strip soft connections in the GW5-40.5 outdoor high-voltage isolation switch outlet socket are respectively fastened to the conductive rod and the terminal block, which is used by users to connect the circuit.
The contact fingers of the middle contact part are assembled in pairs, using self operated contact fingers in the form of a rotating type to reduce wear between the contacts and fingers during opening and closing, and improve service life.
When the isolation switch is equipped with a grounding switch, the interlocking between the main electrical circuit and the grounding switch is ensured by the fan-shaped plate and arc-shaped plate on the base. When the main electrical circuit is closed, the grounding switch cannot be closed, and when the grounding switch is closed, the main electrical circuit cannot be closed.