Product Model	RS2-1K (voltage output type) RS2-DL (current output type)	Operating Voltage	DC type: 5-30VDC
detection distance	2mm±20%	quiescent current	DC trilinear ≤ 2mA
set distance	0~1.6mm	Response frequency	0-20KHz
interpolation value	Less than 10% of the detection distance	current output	200mA
Test object	Steel gears, shafts, chains, etc	Protection level	IP66
residual voltage	DC three wire type: ≤ 1.5VDC
temperature effect	The detection distance at+25 ℃ is below 10% within the range of -25 ℃ to+70 ℃
insulation resistance	≥ 50M Ω Min (500VDC Mega reference)
pressure resistance	1500VAC 50/60Hz per minute
Anti vibration	Anti vibration: 10-55Hz (period per minute) with a complex amplitude of 1mm, 2 hours in each direction of X, Y, and Z
impact-resistant	Impact resistance: 500M/S2 (50G), 3 times in X, Y, Z directions
Ambient temperature	Working hours: -30 to+80 ℃ (in unfrozen state)
	When stored: -30 to+80 ℃ in an unfrozen state)
Ambient Humidity	Working hours: 35 to 95% RH
indicator light	nothing

The RS2 type gear speed sensor adopts a single-chip integrated dedicated gear speed Hall chip, with good temperature characteristics and minimal drift. It is a reliable Hall induction proximity sensor (which can detect metal substances such as iron) and is used in automotive and industrial high-speed control products. It is suitable for sensing the position of speed and precise spacing in transmission and gearbox products with demanding requirements. This sensor can also be equivalent to a precision high-speed proximity switch, and the difference from ordinary inductive proximity switches is that the sensing surface has magnetism

RS2 type gear speed sensor