MSZL type current limiting/conventional lightning rodDetailed product description：

Characteristics of MSZL type current limiting/conventional lightning rod:

1、 The needle tip is made of tungsten metal with a high melting point, which improves its lightning protection ability and has a longer lifespan than traditional materials
2、 By adopting comprehensive techniques such as impedance current limiting, the amplitude of lightning current is reduced, the steepness of the rising edge is slowed down, and the secondary electromagnetic induction on the surrounding area is reduced
3、 The high-end potential of the down conductor is reduced to prevent lateral flashover and suppress ground potential counterattack
4、 Low impedance, strong wind resistance,
5、 Reduce the steepness of lightning current amplitude, achieve good lightning protection effect, and have a wide protection range
6、 Stainless steel material, beautiful appearance, sturdy, lightweight, easy to install

Technical specifications of MSZL type current limiting/conventional lightning rod

model	MSZL-2A/3000	MSZL-2A/2000
Lightning current capacity KA	two hundred	two hundred
Steepness attenuation ratio	≥33	≥20
Amplitude attenuation ratio (%)	≤70	≤70
Resistance Ω	≤1	≤1
Height m	three	two
Quality KG	forty	twenty
Maximum wind resistance strength	forty	forty
Installation size mm	Φ280	Φ210
Galvanized tower pole	Φ160×4×1800	Φ80×4×1800

Technical specifications of conventional lightning rods

model	MSZ-2A/2100	MSZ-2A/1800	MSZ-2A/1500
Lightning current capacity KA	two hundred	two hundred	two hundred
Resistance Ω	≤1	≤1	≤1
Height m	two point one	one point eight	one point five
Quality KG	four point eight	three point six	three
Maximum wind resistance strength	forty	forty	forty
Installation size mm	Φ75	Φ75	Φ50

MSZL type current limiting/conventional lightning rod

MSZL type current limiting/conventional lightning rod（No image available）