AY centrifugal oil pumpDetailed product description：

AY centrifugal oil pump is suitable for transporting petroleum products without solid particles in the power, petroleum, and chemical industries. The temperature range of the conveying medium is -45 ℃ -400 ℃. The AY series oil pump is an improved product based on the Y-shaped oil pump, with an efficiency 5% -8% higher than that of the Y-shaped oil pump. The flow range of the entire series of products is 9.9-300m3/h, and the head range is 65-650m. The pump structure types include single-stage cantilever, two-stage cantilever, multi-stage segmental, and two-stage two end support.

The AY series oil pump is an improved product based on the Y-shaped oil pump, with an efficiency 5% to 8% higher than that of the Y-shaped oil pump, used for conveying medium temperatures. Petroleum products with a temperature range of 45 ℃ to+400 ℃, or other similar media. The flow range of the entire series of products is 9.9-300m3/h, and the head range is 60-650m.

The pump structure types include single-stage cantilever, two-stage cantilever, multi-stage segmental, and two-stage two end support.

The inlet and outlet flanges of the pump are vertically upward. The shaft seal adopts mechanical seal, the bearings are lubricated with thin oil, and equipped with explosion-proof electric motor. The rotation direction is counterclockwise when viewed from the pump coupling end.



As the form or material of mechanical seals needs to be selected according to the conditions of different media, it is best to specify the mechanical seal code or provide the following information when ordering.

1. The composition, temperature, concentration, viscosity, saturated vapor pressure, pH value, boiling point, corrosiveness, toxicity, flammability, impurities, particles, crystals, etc. of the conveying medium. 2. The range of pressure changes at the inlet and outlet of the pump. 3. Does the temperature of the medium allow for cooling.

In order to meet the needs of different media, some parts of the pump are divided into three types of materials, but the structure remains unchanged.

The parameters in the working performance table of AY centrifugal oil pump are converted based on the actual conveying medium conditions using room temperature clean water as the medium. The shaft power and the power of the matched motor can be appropriately increased.

Part Name	temperature range
	-20℃～+200℃	-45℃～+400℃	-45℃～+400℃
	Ⅰ	Ⅱ	Ⅲ
	Not resistant to sulfur corrosion	Not resistant to sulfur corrosion	Sulfur corrosion resistance
pump body	HT250	ZG230-450	ZGCr5Mo
impeller	HT200	ZG230-450	ZG1Cr13
axis	forty-five	35CrMo	3Cr13
bushing	twenty-five	twenty-five	3Cr13
Pump body port ring	40Cr	40Cr	3Cr13
impeller ring	HT250	forty-five	forty-five
Pump body bolts	A3	45 or 35CrMo	45 or 35CrMo
Balance disk	1Cr13 Hard alloy overlay welding	1Cr13 Hard alloy overlay welding	1Cr13 Hard alloy overlay welding
balance board	HT200	40Cr	2Cr13