CWY(CVT) High reliability anti-interference AC parameter stabilized power supplyDetailed product description：

Overview
The CWY (CVT) high reliability anti-interference AC parameter voltage regulator is composed of an isolation transformer, lightning protection anti-interference filter, and wide range balanced fast voltage regulator. This voltage regulator (stabilized power supply) can automatically, quickly, and continuously stabilize the voltage, eliminate various power pollution, and output high-quality electrical energy. This voltage regulator (stabilized power supply) effectively ensures the reliable operation of electrical equipment.

This voltage regulator (stabilized power supply) has the advantages of isolation, anti-interference, wide voltage regulation range, fast response time, small waveform distortion, automatic protection against output short circuits, and long service life.

Main technical parameters (CWY (CVT) high reliability anti-interference AC parameter stabilized power supply (voltage regulator))

input voltage	Single phase 120V-300V	output voltage	220V， Accuracy ± 7%
input voltage	Single phase 160V-264V	output voltage	220V， Accuracy ± 2%
input voltage	Single phase 176V-264V	output voltage	220V， Accuracy ± 1%
input voltage	Three phase 208-520V	output voltage	380V， Accuracy 2% -7%
input voltage	Three phase 266V-494V	output voltage	380V， Accuracy ± 2%
input voltage	Three phase 304V-456V	output voltage	380V， Accuracy ± 1%
frequency	50±1Hz	Response time (input voltage jump ± 100V)	≤30ms
Waveform Distortion	80% (full load)	noise	<60dB (distance 1m)
efficiency	80% (full load)
Equipped with automatic short-circuit protection, the output voltage drops to zero when the load is short circuited, but it is not allowed to work continuously for more than 5 minutes.

Model and Specifications (CWY (CVT) High Reliability Anti Interference AC Parameter Stabilized Power Supply (Voltage Regulator))

phase number	Model and specification (kVA)	Product dimensions Depth x Width x Height (mm)	Weight (kg)		phase number	Model and specification (kVA)	Product dimensions Depth x Width x Height (mm)	Weight (kg)
single phase	CWY-0.3	340×170×200	twenty-three		three phase	CWY-1.5	750×320×650	eighty
	CWY-0.5	340×170×200	twenty-seven			CWY-3	750×350×900	one hundred and sixty-five
	CWY-1	450×250×450	fifty-five			CWY-6	800×550×770	two hundred and seventy
	CWY-2	540×250×450	ninety			CWY-9	1050×650×1400	four hundred and eighty
	CWY-3	700×350×770	one hundred and sixty			CWY-15	1050×750×1400	six hundred and fifty
	CWY-5	700×350×770	two hundred
	CWY-10	800×550×177	three hundred

Selection Tip (CWY (CVT) High Reliability Anti Interference AC Parameter Stabilized Power Supply (Voltage Regulator))
1. Before starting up this voltage regulator (voltage regulator power supply), check whether the input and output wiring connections at the back of the product are correct, and then close the power switch on the voltage regulator (voltage regulator power supply) panel to use it. After confirming that the voltage regulator is functioning properly, turn on the power switch of the electrical equipment used for account opening. This voltage regulator (stabilized power supply) cannot be turned on with a load.
2. The recommended specifications for the input and output wires of this voltage regulator (stabilized power supply) are shown in the table below:

Product capacity	500VA	1000VA	2kVA	3kVA	5kVA
Input line (mm2)	two	four	six	ten	sixteen
Output line (mm2)	one point five	two point five	four	eight	twelve

3. In order to prevent the influence of magnetic leakage, the distance between this voltage regulator and the equipment used should not be less than 2 meters. All kinds of magnetic recording tapes, discs, cards, etc. should be kept 2 meters away from this voltage regulator (power supply) to prevent accidental magnetization by this voltage regulator (power supply).