FL-2/3000A type splitter

The rated voltage drop of the FL type 0.5 constant value shunt is 75mV, which is used in DC circuits to measure high currents with a 75mV limit magnetic point millivolt meter.

The FL-2/3000A splitter operates in an environment where the ambient air temperature ranges from+20 degrees to+50 degrees and the relative temperature is less than 85%, and the air does not contain corrosive impurities.
This splitter is suitable for fixed installation on the feeder busbar. The contact area between the joint and the busbar should be clean and flat. The longitudinal axis of the splitter is horizontally arranged, and the toilet surface of the head is located in a vertical position. The potential terminal is connected to a 75mV millivolt meter (such as a 42C3 millivolt meter). This wiring is customized and should meet the requirements of the millivolt meter (such as a total resistance of 0.035 ohms for the fixed value wire of the 42C3 millivolt meter).