A2F quantitative pump/motorDetailed product description：

A2F quantitative pump/motor (6.1 inclined shaft axial piston design):

The axial cone plunger with a bent shaft structure has a fixed displacement and is used as a pump or motor for hydrostatic transmission in open or closed circuits.
When working as a pump, the flow rate is proportional to the driving speed and displacement.
When working as a motor, the output speed is proportional to the flow rate and inversely proportional to the displacement.
The output torque increases with the pressure drop between the high and low pressure sides.
Features:
Components with large tilt angles: All specifications have the same 40 ° tilt angle, providing high power, relatively small weight, optimal efficiency, and economical structure.
A conical plunger with two sealing rings, driven by a patented universal joint cylinder.
Easy to install and maintain bearing structure, providing a longer lifespan.
New level of modern design standard series.
The specially modified series has the same hydraulic connection ports, flanges, and drive shaft specifications as the 1-4 series.

A2F Quantitative Pump/Motor (6.1 Diagonal Axial Piston Design) Model Diagram

working pressure:
Minimum pressure of pump suction port S
Pabsmin——0.08MPa
The pressure at the outlet of the pump and the inlet of the motor (oil port A or B)
Standard series
German standard spline shaft extension A
Rated pressure - PN=40MPa
Maximum pressure - Pmax=45MPa
National standard flat key shaft extension B
Rated pressure - PN=35MPa
Maximum pressure - Pmax=40MPa
Modify Series
German standard spline shaft extension Z
Rated pressure - PN=35MPa
Maximum pressure - Pmax=40MPa
National standard flat key shaft extension P
Rated pressure - PN=35MPa
Maximum pressure - Pmax=40MPa

Specification (displacement) and speed
Standard series (open system with an absolute pressure of 0.1MPa imported)

Specification		sixteen	thirty-two	forty-five	sixty-three	ninety	one hundred and twenty-five	one hundred and eighty
Displacement Vgmax (ml/r)		sixteen	thirty-two	forty-five point six	sixty-three	ninety	one hundred and twenty-five	one hundred and eighty
maximum speed	Closed system	six thousand	four thousand seven hundred and fifty	four thousand two hundred and fifty	three thousand seven hundred and fifty	three thousand three hundred and fifty	three thousand	two thousand six hundred and fifty
nmax(r/min)	Closed system	three thousand one hundred and fifty	two thousand and five hundred	two thousand two hundred and forty	two thousand	one thousand and eight hundred	one thousand and six hundred	one thousand four hundred and fifty

Modified series (open system with an absolute pressure of 0.1MPa at the inlet)

Specification		twelve	twenty-three	twenty-eight	fifty-six	eighty	one hundred and seven	one hundred and sixty
Displacement Vgmax (ml/r)		twelve	twenty-two point nine	twenty-eight point one	fifty-six point one	eighty point four	one hundred and six point seven	one hundred and sixty point four
maximum speed	Closed system	six thousand	four thousand seven hundred and fifty	four thousand seven hundred and fifty	three thousand seven hundred and fifty	three thousand three hundred and fifty	three thousand	two thousand six hundred and fifty
nmax(r/min)	Closed system	three thousand one hundred and fifty	two thousand and five hundred	two thousand and five hundred	two thousand	one thousand and eight hundred	one thousand and six hundred	one thousand four hundred and fifty