SCZ series chemical standard centrifugal pumpDetailed product description：

SCZ standard chemical pump is a single-stage single suction cantilever centrifugal pump, mainly used for conveying clean or particle containing liquids, low or high temperature liquids, neutral or corrosive liquids in industrial sectors such as petroleum, chemical, synthetic fiber, fertilizer, power station, metallurgy, food and medicine. The temperature of the conveying medium is generally -45 ℃ to 180 ℃. The performance range of SCZ series standardized chemical pumps includes all the performance of 1H series standardized chemical pumps, with efficiency, cavitation performance and other indicators exceeding those of 1H pumps, and can be interchanged with 1H type pumps as a single machine.
The pump speed is divided into two types: 2900 and 1450 revolutions per minute,

The performance of SCZ series chemical standard centrifugal pumps is shown in the following table:

Speed (r/min)	two thousand and nine hundred	one thousand four hundred and fifty
Maximum flow rate (m3/h)	two hundred and eighty	one thousand and seven hundred
Highest total Yang Cheng (m)	one hundred and forty	eighty

Users can choose different materials for the main components of the pump's overcurrent section based on the corrosiveness level of the conveyed medium. The materials and codes of the main components of the overcurrent part of the pump are as follows:

Material	ZG1Cr18Ni9	ZG1Cr18Ni9Ti	ZG0Cr18Ni12Mo2Ti	ZG1Cr18Ni12Mo2Ti	ZG00Cr17Ni14Mo2	ZG1Cr18Mn13Mo2CuN
code name	three hundred and two	three hundred and twenty-one	316Ti	three hundred and seven	316L	four hundred and two

Model meaning

Structural Description of SCZ Series Chemical Standard Centrifugal Pump

The pump is a single-stage, horizontal, volute pump. The pump body is foot supported and has a single suction impeller. Axial suction, radial discharge
Hydraulic leveling is carried out by balancing holes on the secondary blades or impellers;
Partial specifications of pump bodies are designed with double volute shells to balance radial forces;
The shaft seal can use soft packing seal (which can be cooled or not cooled), or various structures of single or double end mechanical seals (which can be balanced);
The rated pressure rating of the suction and discharge pipe flanges is the same;
Lubricate the bearings with clean No. 22 mechanical oil;
The rotation direction of the pump is clockwise when viewed from the prime mover end.