GJ41X-6L type pipe clamp valveDetailed product description：

Structure and Working Principle of GJ41X-6L Pipe Clamp Valve
(1) Structure: The GJ41X-6L pipe clamp valve consists of left and right valve bodies, rubber pipe sleeves, large and small valve stems, upper and lower gate plates, guide columns, and other components.
(2) Working principle: When the steering wheel is turned in sequence, the large and small valve stems simultaneously drive the upper and lower gate plates, compress the pipe sleeve, and close them. When reversed, they open them. In this way, the gate plates reciprocate up and down between the guide columns to complete the valve opening and closing work. In addition, due to the load-bearing capacity of the rubber sleeve, when the operator rotates the handwheel during the switch, as long as they feel an appropriate amount of resistance, they have already reached the opening and closing pole. Do not try their best or have multiple people assist, and do not use other tools for opening and closing.  

Structural diagram of GJ41X-6L type pipe clamp valve

Main connection dimensions and external dimensions of GJ41X-6L pipe clamp valve

Nominal Diameter	Main outline dimensions and connection dimensions of GJ41X-6L pipe clamp valve						Weight (KG)
	L	D	D1	D2	b	Z-?
twenty	one hundred and thirty-five	one hundred and five	seventy-five	fifty-five	sixteen	4-14	two point five
twenty-five	one hundred and forty-five	one hundred and fifteen	eighty-five	sixty-five	sixteen	4-14	three
thirty-two	one hundred and sixty	one hundred and thirty-five	one hundred	seventy-eight	eighteen	4-18	four
forty	one hundred and eighty	one hundred and forty-five	one hundred and ten	eighty-five	eighteen	4-18	six
fifty	two hundred and ten	one hundred and sixty-five	one hundred and twenty-five	one hundred	twenty	4-18	seven point five
sixty-five	two hundred and fifty	one hundred and eighty-five	one hundred and forty-five	one hundred and twenty	twenty	4-18	nine point five
eighty	three hundred	one hundred and ninety	one hundred and sixty	one hundred and thirty-five	twenty-two	4-18	sixteen
one hundred	three hundred and fifty	two hundred and fifteen	one hundred and eighty	one hundred and fifty-five	twenty-two	8-18	twenty
one hundred and twenty-five	four hundred and thirty	two hundred and forty-five	two hundred and ten	one hundred and eighty-five	twenty-five	8-18	twenty-eight
one hundred and fifty	five hundred	two hundred and eighty	two hundred and forty	two hundred and ten	twenty-five	8-23	forty-three
two hundred	six hundred and fifty	three hundred and thirty-five	two hundred and ninety-five	two hundred and sixty-five	thirty-two	8-23	eighty

Overview of clamp valves for electrolytic cells
The pipe clamp valve for electrolytic cells is made of special engineering plastics, with small volume and light weight. The valve body and all accessories have strong corrosion resistance. The valve is suitable for normal operation in environments that are corroded by acid both inside and outside. Eliminating internal and external leakage, facilitating tank cleaning work, practice has proven that it replaces stainless steel clamps and ends the history of using ball valves, plug valves or other valves. Its structure and working principle are the same as the pipe clamp valve.  

Installation and maintenance of clamp valves for electrolytic cells
(1) Insert the plastic pipe extending from the ground below the electric contact groove into one end of the rubber hose of the small valve, and insert the plastic pipe supplied by our factory into the other end. The outlet extends towards the electric contact groove and then tighten the two ends with copper wire or stainless steel clamps.
(2) After long-term use, if there is wear or leakage, simply open the left and right valve bodies and replace the pipe sleeves, and the valve can be used for a long time.

Nominal Diameter	Main connection dimensions of clamp valves for electrolytic cells		Weight
	L1	L2
thirty-two	one hundred and forty-five	two hundred and twenty	five hundred and fifty
Fitting bend pipe	Use size according to user requirements		one hundred and sixty
forty	one hundred and forty-five	two hundred and forty	six hundred and fifty
Fitting bend pipe	Use size according to user requirements		two hundred