P2 explosion-proof double buttonDetailed product description：

P2 explosion-proof double button

The standard diameter of the front operating head for explosion-proof components of the board back type and board back cable type is Φ 30mm, installed on a panel with a thickness of 1-6 mm. The board back type and board back cable type modules are connected to the pre installed front-end operating head with the help of a clamp. Rear type explosion-proof components come with wiring terminals; The explosion-proof component of the cable type behind the board is equipped with a 3m long flexible cable. The explosion-proof components behind the board should be installed in an increased safety shell with a protection level of IP54 or above; Rear cable explosion-proof components are widely used in piano control equipment and monitoring equipment.  

The explosion-proof switch module of the board back type and the board back cable type can be combined with different operating heads to form various forms of explosion-proof button components and explosion-proof switch components.

CE International Certification
The identification symbol and text of the button can be permanently retained after sintering.
The rated current of the explosion-proof switch module can reach 16A (380V), and the mechanical life can reach 1 million times.

P2 explosion-proof double button external dimensions