MS5215 Type High Voltage Insulation Resistance TesterDetailed product description：

MS5215 High Voltage Insulation Resistance Tester Details

On site measuring instrument
Test voltage 250V~5kV,
Measurement of maximum 5T Ω insulation resistance
Insulation resistance measurement of high-voltage equipment (transformers, cables, motors, etc.)
Built in high-power high-voltage generator (adjustable from 250V to 5kV)
PI (Polarization Index) and DAR (Inductive Absorption Ratio) are automatically calculated and displayed
Step voltage testing, temperature compensation, temperature measurement, leakage current measurement
Data storage and upload functions,

Features:
Wide range testing voltage and insulation resistance measurement
The test voltage is set in steps from 250V to 5kV, with a maximum measurement of 5T Ω insulation resistance.
Support various insulation judgments
Capable of automatic calculation and display of PI (polarization index) and DAR (inductive absorption ratio), as well as step voltage testing (5th order, adjustable voltage and time for each order)
Insulation judgment functions such as temperature compensation, temperature measurement, and leakage current display.
Data storage and upload function
It can save 100 manually recorded data, automatically record 10 sets of data (up to 360 measurement points per data), and automatically record the date and time.
carrying case
Adopting hard boxes suitable for on-site use
Can also use rechargeable batteries
Can simultaneously load 2 # batteries and rechargeable batteries When the capacity of one set of batteries is insufficient, it can be switched to another set to continue using.

Main functions of MS5215 high-voltage insulation resistance meter
Measurement of insulation resistance and leakage current
Test voltage: DC250V~5.00kV, test insulation resistance 0-5T ohms; Test current maximum 1mA
Can display insulation resistance, leakage current, PI，DAR， measure time

Step voltage test
Gradually increase the test voltage and measure the changes in insulation resistance and leakage current at different voltages
There are two options for selecting step voltage values. The testing time at each step stage can be selected
Display of PI (Polarization Index) and DAR (Inductive Absorption Ratio)
Can automatically measure PI and DAR parameters

Active line voltage measurement
Measurable AC and DC voltages:
AC 50-750V communication, frequency: 50Hz/60Hz
DC ± 50 to ± 1000V
Measurement accuracy: ± 5% rdg. ± 5% dgt

temperature measurement
-10~70 ℃ Measurement accuracy: ± 1.5 ℃

Data storage function
It can manually store 100 sets of data or automatically record and store 10 sets of data, with a maximum storage capacity of 360 measurement points per set

Data upload function
The stored data can be uploaded to a PC through a USB interface to form charts, prints, and archives And it can be set and modified on the PC side to adjust the measurement parameters
Supports USB 2.0 (FULL SPEED)

parameter indicators
Temperature and humidity range: 0-40 ℃, below 90% RH (non condensing)
Display screen: LCD display with backlight
Display update rate of 1 time/s (0.25 times/s when using the average function)
Output voltage monitoring: 2 times/s
Voltage measurement: 4 times/s
Temperature measurement: 1 time/s
Simulated bar shape: 2 times/s
Battery: Battery No. 6 x 6
Ni MH rechargeable battery, 7.2V
Maximum rated power: 15W
Continuous usage time: 5 hours for dry batteries and 9 hours for rechargeable batteries when 5kV occurs,+/- ports are disconnected, and backlight display is turned off
Maximum rated voltage to ground: 600Vrms (CAT IV), 1000Vrms (CAT III)
Insulation level: AC7000V 15s between electrical circuit and enclosure