MS2301 Clamp type grounding resistance testerDetailed product description：

MS2301 Clamp type Grounding Resistance Tester Details
Product Description:

Overview:
Due to the widespread use of modern industrial electrical equipment, a good grounding has become an important effective protection system against interference and lightning strikes. Therefore, a safe and fast grounding measurement method has become an urgent need. The clamp type grounding resistance meter is a major breakthrough in traditional grounding resistance measurement. During measurement, there is no need to use auxiliary grounding rods or interrupt the grounding of the tested equipment. Simply clamp the grounding wire or rod to safely and quickly measure the ground resistance.
In addition, the product can also be used for current measurement. Its high-sensitivity clamp meter can measure leakage current up to 1mA, while the neutral current can reach 20A RMS. This function is particularly important when the measured grounding circuit contains significant noise and harmonics that can affect power quality.
The MS2301 clamp type grounding resistance tester is widely used in fields such as power distribution, telecommunications system configuration, and building grounding, in addition to industrial electrical equipment.
Features:
·0.01 Ω low resistance high-precision measurement
·0.001 Ω high resolution
·Can store 99 sets of resistance measurement data
·Alarm values can be set within the range of 1 Ω∽ 100 Ω
·Measurable leakage current and neutral line current
·Large caliber 45 × 32mm precision measuring probe, elliptical jaws, capable of measuring flat iron grounding.
·Digital measurement, automatic shifting, easy operation
·The clamp head has double-layer protective insulation, which enhances anti-interference ability
·Non contact measurement improves measurement safety
·The single measurement time is 1 second, which reflects the speed of the measurement
·Equipped with battery limit alarm function
·Display: LCD 3 3/4 digits
·Clamp head diameter: 32mm X 45mm
·Current overload display: When it is greater than 20A RMS, "OL" is displayed