SJY800 Penetrating mortar strength testerDetailed product description：

SJY800 Penetrating Mortar Strength Tester

Penetration method testing is a new on-site method based on the correlation between the concentration of the test nail penetrating the mortar and the compressive strength of the mortar. It uses a compression type spring load to penetrate a test nail into the mortar. The penetration depth of the test nail is converted into the compressive strength of the mortar through the strength curve. The product complies with the industry standard JGJ/T136-2001 of the People's Republic of China for the "Technical Specification for Penetration Method Testing of Masonry Mortar Strength".

SJY800 Penetrating Mortar Strength Tester Testing Method.

The penetration method for testing the compressive strength of mortar is used in the field of mortar strength testing technology due to its:
1. Easy to operate;
2. Accurate detection of
results;
3. The advantages of low testing costs have been highly praised by users, and it is currently the most widely used testing technology in on-site mortar strength testing. The industry standard of the People's Republic of China, "Technical Specification for Testing the Compressive Strength of Masonry Mortar by Penetration Method" (JGJ/T136-2001), which is used in conjunction with the promotion of this technology, was officially promulgated and implemented on January 1, 2002.

Technical Indicators:
1. Mortar strength testing range: 0.4Mpa~16.0Mpa
2. Hand cranked method: The compressive strength of masonry mortar is tested by measuring the depth of the ground nail, and the accuracy coefficient of the strength curve is above 0.95.