XMJB Intelligent temperature and pressure compensation flow integratorDetailed product description：

XMJB Intelligent Temperature and Pressure Compensation Flow Accumulator

I. Overview
The XMJB flow integrator can simultaneously receive temperature, pressure, and three signals, and can convert the flow rate under medium conditions into the flow rate under standard conditions. It is compatible with various forms of flow sensors and is widely used in industries such as steel, chemical, power energy, thermal, and metallurgy

2、 Characteristics
Measurable saturated steam, superheated steam, and general gases
Simultaneously measure temperature, pressure, instantaneous flow rate, and cumulative flow rate
Can be equipped with a micro printer interface, with optional timed and manual printing options
Suitable for flow meters such as turbine, vortex street, electromagnetic, ultrasonic, orifice plate, etc
Instantaneous flow current transmission output, transmission output range can be set arbitrarily
RS485 communication interface, providing testing software and technical support

3、 Technical parameters
1. Power supply voltage: AC220V ± 15%
2. Flow signal: 0-5V, 1-5V, 4-20mA;
0～10KHz； Amplitude ≥ 4V
3. Pressure signal: 4-20mA
4. Temperature signal: K, E, T, Pt100, 4-20mA
5. Basic error: ± 0.2% FS ± 1 word
6. Small signal resection: 0-25.0%
7. Display range: Instantaneous flow rate: 0-9999
Accumulated value range: 0~9999999.999
8. Alarm output: 2 instantaneous flow alarms, 1 cumulative flow alarm
9. Contact capacity: AC250V/3A; DC24V/5A
10. Feed output: DC24V/30mA; DC12V/30mA
11. Transmission output: 0-20mA, 4-20mA
12. Transmission load: not less than 500 Ω
13. Communication output: RS485 (photoelectric isolation)
Modbus (RTU) protocol
14. Dimensions: 160 × 80 × 125mm
15. Hole size: 152 × 76mm
16. Operating environment: 0-50 ℃; <85%RH

3、 Model Description