I. Overview

MCS-II intelligent speedometer has a 5-digit 0.8-inch digital display, one current output, three relay alarm outputs and alarm indicator lights, as well as RS232/485 communication. The baud rate can be adjusted by the user; It can be matched with NPN-OC output switch type speed sensors and magneto electric speed sensors. In addition to detecting general speed, linear velocity, and flow rate, it can also measure ultra-low and ultra-high speeds. It is an intelligent speed display control instrument.
MCS-II intelligent speedometer has 10 sets of user parameters, which can be queried/modified by the operation keys on the panel or computer. The confirmed parameters can be saved for a long time.

The MCS-II intelligent speedometer has made improvements to the original model, including:

Measurement range: High frequency up to 50kHz, low frequency up to 0.001Hz;
Measurement error: less than 0.01%;
Dynamic characteristics: The minimum sampling time is 20mS;
Communication speed: 4800bps, 9600bps, 57600bps, 115200bps, users can choose;
Collection software: There are various upper computer software that can be used together.
At present, it is widely used for measurement and control in industries such as power, metallurgy, shipbuilding, machinery, textiles, and papermaking.

2、 Main technical characteristics
1. Power supply: 85V~250V, AC, 50Hz/60Hz or 18V~32V, DC
2. Power consumption: not exceeding 5W
3. Input signal: 0-10kHz (AC)
0～50kHz（(NPN-OC/TTL/CMOS））
4. Display range: 0.1 to 99999 (decimal point can be kept to any digit)
5. Basic error: 0.1% (digital, sampling time 20ms~100ms)
0.05% (digital, sampling time 100ms~500ms)
0.01% (number, sampling time of 500ms or more)
0.2% (analog output)
6. Operating environment: Temperature -20~65 ℃
Relative humidity ≤ 85%
7. Hole size: 152 × 76
8. Dimensions: 160 × 80 × 130
9. Weight: less than 800g

The specification diagram is as follows:



Ordering instructions:
The basic functions of MCS-II intelligent speedometer include 5-digit 0.8-inch digital display, one current output, three relay outputs, and alarm indicator lights. The communication and power supply are determined by the specifications. If there is no specification number MCS-II when ordering, corresponding to commonly used specifications, in addition to basic functions, the power supply is 85-250V, AC, and RS485 communication is used;
Example of ordering specifications: Specification MCS-II2-DC, in addition to basic functions, the power supply is 18-32V, DC, and RS232 communication is used.