CFBHS type suspended beam steel weighing sensorDetailed product description：

Cantilever (Shear) Sensor

The CFBHS suspended beam steel weighing sensor is fixed at one end and loaded at the other end. It adopts a steel ball force transmission and a double ball head structure for upper and lower pressure bearing. After being subjected to force, it automatically adjusts its center, is easy to install, convenient to use, and has good interchangeability. It can be used to make various ultra-thin electronic car scales, monorail hanging scales, hopper scales, etc.
Rated load (Kg) L L1 L2 L3 H B D M
50～2000 130 15.8 25.4 76.2 32 32 Φ13.5 M12x1.75
3000～5000 171.5 19.1 38.1 95.3 38 38 Φ19.8 M18x1.50
1000 222 25.4 50.8 120.6 50.8 50.8 Φ26 M24

Purpose: Mainly suitable for electronic truck scales Unit: mm
Rated load (t) L0 L1 L2 L3 L4 H0 H1 H2 D0 D1 D2 W
0.5,1,2, 203 95 64 98 22 43 37 30 13 16 32 37
5 235 110 66 124 22 52 48 30 20 22 38 48
10 279 133 82 140 32 67 60 20 28 32 48 60
20 318 153 89 159 38 82.5 70 24 34 38 54 70

Main Technical Indicators Unit Technical Indicators
Rated load kg 50-20T
Sensitivity mV/V 2.0 ± 0.2%
Nonlinear% F.S ± 0.02
Lag error% F.S ± 0.02
Repetitive error% F.S ± 0.01
Creep (30 minutes)% F.S ± 0.02
Zero point balance% F.S ± 0.1
Zero temperature effect% F.S ℃± 0.002
Output temperature impact% F.S ℃± 0.002
Input resistance Ω (ohms) 400 ± 5
Output resistance Ω (ohms) 351 ± 1
Insulation resistance M Ω≥ 5000 (at50VDC)
Working temperature range ℃ -30~+70
Safe overload% F.S 150
Maximum overload% F.S 250
Recommended incentive voltage V 10-12
Maximum excitation voltage V 15
Sealing grade IP66