YXC-150-ZG anti vibration electric contact pressure gauge (high power)
The contact power capacity of general electric contact pressure gauges is relatively small. Some instruments' electric contact devices are immersed in damping fluid, and an oil film adheres to the contacts, increasing the contact resistance. When the current is high, they cannot work reliably and the contacts are prone to erosion and failure.    

The anti vibration (high-power) electric contact pressure gauge adopts bidirectional thyristor output and optical signal triggering circuit. The contact current is extremely small, only a few mA, and does not generate sparks, so there is no contact corrosion phenomenon. It can still work when the contact resistance is as high as several K Ω, so the contact is extremely reliable and the response speed is fast. The output capacity can reach 1200VA, which can effectively overcome the aforementioned defects, greatly increase the electrical life, and have high reliability.  

Technical parameters of YXC-150-ZG anti vibration high-power electric contact pressure gauge:
Contact capacity: AC220V, 3A
Electrical lifespan: 1 million cycles
Environmental temperature: -10 ℃~55 ℃
Relative humidity: 10%~75%
Accuracy level: 1.6 level
Protection level: IP64
Upper limit of work pressure: not exceeding 2/3 of the instrument upper limit
The vibration frequency of the working environment shall not exceed 25Hz, and the amplitude shall not exceed 0.5mm
Execution standard: Q/320211 DGH05-2001
Measurement range: -0.1~0.15; -0.1~0.3; -0.1~0.9; -0.1~1.5; -0.1~2.4;
0.25; 0.4; 0.6; 1.0; 1.6; 2.5; 4.0; 6.0; 10;16; 25;40; sixty

Overall dimensions:

Wiring legend (upper and lower limits):

Usage and ordering instructions:
The working environment should be free of corrosive gases.
Please specify the name and model when placing an order.