Shanghai Huabang Industrial Business Network - terminal block

[terminal block]DT(G) series copper terminal block

2026-6-18 13:24:47

DT (G) series copper terminal block

[terminal block]DT series copper terminal block

2026-6-18 13:24:39

DT series copper terminal block

[terminal block]DTGY Type Marine Series Copper Terminal Blocks

2026-6-18 13:24:30

DTGY marine series copper terminal block

[terminal block]GTA type double headed connecting pipe

2026-6-18 13:24:22

GTA type double headed connecting pipe

[terminal block]CE type nylon wire cap

2026-6-18 13:24:13

CE type nylon wire cap

[terminal block]SP series spiral wire cap

2026-6-18 13:24:05

SP series spiral wire cap

[terminal block]SQNB square bare terminal

2026-6-18 13:23:56

SQNB type square bare terminal

[terminal block]BNYF type nylon fully insulated sleeve intermediate connection terminal

2026-6-18 13:23:48

BNYF type nylon fully insulated intermediate connection terminal

[terminal block]PNT type insulated short middle parallel terminal

2026-6-18 13:23:39

PNT type insulated short middle parallel terminal

[terminal block]TENY Multi color flame retardant nylon insulated double wire tubular terminal

2026-6-18 13:23:31

TENY multi-color flame-retardant nylon insulated double wire tubular terminal

[terminal block]TE type insulated double wire tube terminal

2026-6-18 13:23:22

TE type insulated double wire tube terminal

[terminal block]ENY Flame retardant nylon insulated sleeve terminal

2026-6-18 13:23:14

ENY flame retardant nylon insulated sleeve terminal

[terminal block]PBDDN-D Copper sleeve shoulder back shaped male and female pre insulated ends

2026-6-18 13:23:05

PBDDN-D with copper sleeve shoulder back shaped male and female pre insulated ends

[terminal block]Shoulder back shaped male and female pre insulated ends

2026-6-18 13:22:57

PBDDN shoulder back shaped male and female pre insulated terminals

[terminal block]Nylon fully insulated copper sleeve elastic male plug terminal

2026-6-18 13:22:48

MPFNY-D Nylon Fully Insulated Copper Sleeve Elastic Male Plug Terminal

[terminal block]MPFNY Nylon fully insulated sleeve elastic male plug terminal

2026-6-18 13:22:40

MPFNY nylon fully insulated sleeve elastic male plug terminal

[terminal block]FDFNY-D type nylon fully insulated copper sleeve bullet shaped female plug terminal

2026-6-18 13:22:31

FDFNY-D type nylon fully insulated copper sleeve bullet shaped female plug terminal

[terminal block]FDFNY type nylon fully insulated sleeve elastic female plug terminal

2026-6-18 13:22:23

FDFNY type nylon fully insulated sleeve elastic female plug terminal

[terminal block]LBNB type non insulated sleeve folded corner terminal

2026-6-18 13:22:15

LBNB type non insulated sleeve folded corner terminal

[terminal block]LBNY-D Copper sleeve type nylon insulation sleeve angled sheet terminal

2026-6-18 13:22:06

LBNY-D copper sleeve nylon insulation sleeve angled sheet terminal

[terminal block]LBNY type nylon insulation sleeve angled terminal

2026-6-18 13:21:58

LBNY type nylon insulation sleeve angled sheet terminal

[terminal block]MDDN-D type insulated copper sleeve male plug terminal

2026-6-18 13:21:49

MDDN-D type insulated copper sleeve male plug terminal

[terminal block]MDDN type insulated male plug terminal

2026-6-18 13:21:41

MDDN type insulated male plug terminal

[terminal block]MDFN type fully insulated male socket terminal

2026-6-18 13:21:31

MDFN type fully insulated male plug terminal

[terminal block]FLDNY Fully insulated flag shaped female plug terminal

2026-6-18 13:21:23

FLDNY fully insulated flag shaped female plug terminal

[terminal block]FDDN-D type insulated copper sleeve female plug terminal

2026-6-18 13:21:14

FDDN-D type insulated copper sleeve female plug terminal

[terminal block]FDDN type insulated socket terminal block

2026-6-18 13:21:05

FDDN type insulated female plug terminal

[terminal block]FSNB type insulated sleeve folded fork terminal

2026-6-18 13:20:57

FSNB type insulated sleeve folded fork terminal

[terminal block]FSNY-D type PVC insulated sleeve angled fork terminal

2026-6-18 13:20:48

FSNY-D type PVC insulated sleeve angled fork terminal

[terminal block]FSNY type nylon insulation sleeve angled fork terminal

2026-6-18 13:20:40

FSNY type nylon insulation sleeve angled fork terminal

[terminal block]FSV series insulated sleeve angled fork terminal

2026-6-18 13:20:31

FSV series insulated sleeve angled fork terminal

[terminal block]LSNB series non insulated copper sleeve fork shaped terminal

2026-6-18 13:20:23

LSNB series non insulated copper sleeve fork terminal

[terminal block]LSNY series nylon sheathed locking fork terminal

2026-6-18 13:20:14

LSNY series nylon sheathed locking fork terminal

[terminal block]HNB series non insulated sleeve hook terminal

2026-6-18 13:20:05

HNB series non insulated sleeve hook terminal

[terminal block]HNY-D series nylon insulated copper sleeve hook shaped terminal

2026-6-18 13:19:57

HNY-D series nylon insulated copper sleeve hook terminal

[terminal block]HNY series nylon insulated hook terminals

2026-6-18 13:19:48

HNY series nylon insulated hook terminal

[terminal block]PTNB series non insulated needle terminals

2026-6-18 13:19:39

PTNB series non insulated needle terminal

[terminal block]PTNY-D series nylon insulated and copper sheathed needle terminals

2026-6-18 13:19:31

PTNY-D series nylon insulated and copper sheathed needle terminals

[terminal block]PTNY series nylon insulated sleeve needle terminal

2026-6-18 13:19:22

PTNY series nylon insulated sleeve needle terminal

[terminal block]DBNB series non insulated sleeve shaped terminals

2026-6-18 13:19:14

DBNB series non insulated sleeve shaped terminal

[terminal block]DBNY-D series nylon insulated copper sheathed sheet terminals

2026-6-18 13:19:05

DBNY-D series nylon insulated copper sheathed sheet terminals

[terminal block]DBNY series nylon insulated sleeve shaped terminal

2026-6-18 13:18:57

DBNY series nylon insulated sheet terminal

[terminal block]SNY series nylon insulated fork shaped terminal

2026-6-18 13:18:48

SNY series nylon insulated fork shaped terminal

[terminal block]RNY series nylon insulated sleeve circular terminal

2026-6-18 13:18:40

RNY series nylon insulated circular terminal

[terminal block]DL series oil blocking aluminum terminal block

2026-6-18 13:18:31

DL series oil blocking aluminum terminal block technical parameter table

model	Main dimensions (mm)
model	��	D	d	L	L1	A
DL-10	eight point five	nine	five point three	sixty-four	twenty-nine	sixteen
DL-16	eight point five	ten	six point three	sixty-seven	thirty-one	sixteen
DL-25	eight point five	fifteen	seven point three	seventy-five	thirty-four	eighteen
DL-35	ten point five	fourteen	eight point five	eighty-five	forty	twenty point five
DL-50	ten point five	sixteen	nine point eight	ninety	forty-two	twenty-three
DL-70	twelve point five	eighteen	eleven point five	one hundred and two	forty-eight	twenty-six
DL-95	twelve point five	twenty-one	thirteen point five	one hundred and twelve	fifty-two	twenty-eight
DL-120	fourteen point five	twenty-three	fifteen	one hundred and twenty	fifty-three	thirty
DL-150	fourteen point five	twenty-five	sixteen point five	one hundred and twenty-six	fifty-six	thirty-four
DL-185	seventeen	twenty-seven	eighteen point five	one hundred and thirty-three	fifty-eight	thirty-seven
DL-240	seventeen	thirty	twenty-one	one hundred and forty	sixty	forty
DL-300	twenty-one	thirty-four	twenty-four	one hundred and sixty	sixty-five	fifty
DL-400	twenty-one	thirty-eight	twenty-seven	one hundred and seventy	seventy	fifty
DL-500	twenty-one	forty-two	twenty-nine	one hundred and eighty-eight	seventy-five	sixty

[terminal block]DT2-D series grounding wire copper terminal block

2026-6-18 13:18:23

DT2-D series grounding wire copper terminal size table

model	Main dimensions (mm)
model	D	d	d1	L	L1
DT-16D	twelve	seven	nine	eighty	twenty-nine
DT-25D	fourteen	nine	eleven	eighty-five	thirty-two
DT-35D	sixteen	ten	twelve	eighty-five	thirty-two
DT-50D	eighteen	eleven point eight	thirteen point three	eighty-eight	thirty-two
DT2-16D	twelve	seven	nine	ninety-four	twenty-nine
DT2-25D	fourteen	nine	eleven	ninety-seven	thirty-two
DT2-35D	sixteen	ten	twelve	one hundred	thirty-two

Note: The DT-D series copper terminals are mainly used for connecting grounding rods and other devices with insulated copper grounding wires. The DT2-D series is a double hole type.

[terminal block]DTL2 column copper aluminum double hole terminal block

2026-6-18 13:18:14

DTL2 column copper aluminum double hole terminal block

model	Main dimensions (mm)
model	D	d	L	L1	A
DTL2-35F	sixteen	eight point five	one hundred and seventeen	forty	twenty-two
DTL2-50F	sixteen	nine point eight	one hundred and eighteen	forty-two	twenty-two
DTL2-70F	eighteen	eleven point five	one hundred and thirty-three	forty-eight	twenty-eight
DTL2-95F	twenty-one	thirteen point five	one hundred and forty-four	fifty-two	twenty-eight
DTL2-120F	twenty-three	fifteen	one hundred and forty-eight	fifty-three	thirty-four
DTL2-150F	twenty-five	sixteen point five	one hundred and fifty-two	fifty-six	thirty-four
DTL2-185F	twenty-seven	eighteen point five	one hundred and sixty-three	fifty-eight	forty
DTL2-240F	thirty	twenty-one	one hundred and sixty-eight	sixty	forty
DTL2-300F	thirty-four	twenty-four	one hundred and eighty	sixty-five	fifty
DTL2-400F	thirty-eight	twenty-seven	one hundred and ninety-two	seventy	fifty

Note: Double hole copper terminals are divided into two subtypes: square head and round head. Square head is the default type. If round head is required, please specify it in the order.

[terminal block]DTL2-FQ Brazed series double hole copper aluminum terminal block (brazed)

2026-6-18 13:18:06

DTL2-FQ brazed series double hole copper aluminum terminal block (brazed)

model	Main dimensions (mm)
model	d	D	L	L1	L3	A
DTL2-35FQ	eight point five	sixteen	one hundred and seventeen	forty	sixty	twenty-two
DTL2-50FQ	nine point eight	sixteen	one hundred and seventeen	forty-two	sixty	twenty-two
DTL2-70FQ	eleven point five	18*	one hundred and thirty-three	forty-eight	sixty-five	twenty-eight
DTL2-95FQ	thirteen point five	twenty-one	one hundred and forty-four	fifty-two	sixty-five	twenty-eight
DTL2-120FQ	fifteen	twenty-three	one hundred and forty-eight	fifty-three	sixty-five	thirty-four
DTL2-150FQ	sixteen point five	twenty-five	one hundred and fifty-two	fifty-six	sixty-five	thirty-four
DTL2-185FQ	eighteen point five	twenty-eight	one hundred and sixty-three	fifty-eight	seventy-three	forty
DTL2-240FQ	twenty-one	thirty	one hundred and sixty-eight	sixty	seventy-three	forty
DTL2-300FQ	twenty-four	thirty-four	one hundred and eighty	sixty-five	eighty	fifty
DTL2-400FQ	twenty-seven	38/	one hundred and ninety-two	seventy	eighty	fifty

[terminal block]DFY1b(PJ1) type electric energy metering joint junction box

2026-6-18 13:17:59

DFY1b(PJ1) type electric energy metering joint junction box

Product Specifications
3X380/220V�� Semi closed/fully closed

[terminal block]DTL-Q Brazed series copper aluminum terminal block (brazed)

2026-6-18 13:17:57

DTL-Q brazed series copper aluminum terminal block (brazed)

model	Main dimensions (mm)
model	d	D	��	L	L1	L3	A
DTL-16Q	six point three	twelve	eight point five	seventy-six	thirty-one	twenty-four	twenty point five
DTL-25Q	seven point three	twelve	eight point five	seventy-nine	thirty-four	twenty-four	twenty point five
DTL-35Q	eight point five	fourteen	ten point five	eighty-five	forty	twenty-four	twenty point five
DTL-50Q	nine point eight	sixteen	ten point five	ninety	forty-two	twenty-eight	twenty-three
DTL-70Q	eleven point five	eighteen	twelve point five	one hundred and two	forty-eight	thirty-one	twenty-six
DTL-95Q	thirteen point five	twenty-one	twelve point five	one hundred and twelve	fifty-two	thirty-three	twenty-eight
DTL-120Q	fifteen	twenty-three	fourteen point five	one hundred and twenty	fifty-three	thirty-five	thirty
DTL-150Q	sixteen point five	twenty-five	fourteen point five	one hundred and twenty-six	fifty-six	thirty-nine	thirty-four
DTL-185Q	eighteen point five	twenty-seven	seventeen	one hundred and thirty-three	fifty-eight	forty-two	thirty-seven
DTL-240Q	two hundred and ten	thirty	seventeen	one hundred and forty	sixty	forty-five	forty
DTL-300Q	twenty-four	thirty-four	twenty-one	one hundred and sixty	sixty-five	fifty-six	fifty
DTL-400Q	twenty-seven	thirty-eight	twenty-one	one hundred and seventy	seventy	fifty-six	fifty
DTL-500Q	twenty-nine	forty-two	twenty-one	one hundred and eighty-eight	seventy-five	seventy	sixty

[terminal block]DFY2a type electric energy metering joint junction box

2026-6-18 13:17:49

DFY2a type electric energy metering joint junction box

[terminal block]DFY2 type electric energy metering joint junction box

2026-6-18 13:17:40

DFY2 type electric energy metering joint junction box

[terminal block]MPD Bullet shaped male fully insulated joint

2026-6-18 13:17:37

MPD bullet shaped male fully insulated joint

Wire cross-section: 0.5-1.5 mm²(American Wire Gauge 22-16) Maximum current: Imax=10A Material: Brass
Model number	material thickness	Size/Talent					color
Model number	material thickness	b��	F	D��	H	L	color
MPD 1 - 156	zero point four	three point nine	eleven	one point seven	ten	twenty-one	red

Wire cross-section: 1.5-2.5 mm²(American Wire Gauge 16-14) Maximum current: Imax=15A Material: Brass
Model number	material thickness	Size/Talent					color
Model number	material thickness	b��	F	D��	H	L	color
MPD 2 - 156	zero point four	three point nine	7.3 / .287	two point three	ten	23.5 / .925	blue
MPD 2 - 195	zero point four	four point nine	7.0 / .276	two point three	ten	24.5 / .965	blue

Wire cross-section: 4-6 mm²(American Wire Gauge 12-10) Maximum current: Imax=24A Material: Brass
Model number	material thickness	Size/Talent					color
Model number	material thickness	b��	F	D��	H	L	color
MPD 5 - 195	zero point four	four point nine	7.0 / .276	three point four	thirteen	25.1 / .988	yellow

Bullet shaped male fully insulated joint (MPD)

[terminal block]DFY1m(TY9728) type electric energy metering joint junction box

2026-6-18 13:17:32

DFY1m (TY9728) type electric energy metering joint junction box

[terminal block]DFY1La(NZ2080) type electric energy metering joint junction box

2026-6-18 13:17:23

DFY1La (NZ2080) type electric energy metering joint junction box

[terminal block]FRD Bullet shaped female fully insulated joint

2026-6-18 13:17:23

FRD bullet shaped female fully insulated joint

Wire cross-section: 0.5-1.5 mm²(American Wire Gauge 22-16) Maximum current: Imax=10A Material: Brass
Model number	material thickness	Size/Talent					color
Model number	material thickness	b��	B��	D��	F	L	color
FRD 1.25 - 156	zero point four	3.9 / .153	six point three	one point seven	thirteen	23.3 / .917	red

Wire cross-section: 1.5-2.5 mm²(American Wire Gauge 16-14) Maximum current: Imax=15A Material: Brass
Model number	material thickness	Size/Talent					color
Model number	material thickness	b��	B��	D��	F	L	color
FRD 2 - 156	zero point four	3.9 / .153	six point three	two point three	fourteen	23.5 / .925	blue
FRD 2 - 195	zero point four	4.9 / .193	seven	two point three	fourteen	24.5 / .965	blue

Wire cross-section: 4-6 mm²(American Wire Gauge 12-10) Maximum current: Imax=24A Material: Brass
Model number	material thickness	Size/Talent					color
Model number	material thickness	b��	B��	D��	F	L	color
FRD 5.5 - 195	zero point four	4.9 / .193	seven	three point four	fourteen	25.1 / .988	yellow

Bullet shaped female fully insulated joint (FRD)

[terminal block]DFY1L type electric energy metering joint junction box

2026-6-18 13:17:15

DFY1L type electric energy metering joint junction box

[terminal block]DFY1k type electric energy metering joint junction box

2026-6-18 13:17:06

DFY1k type electric energy metering joint junction box

[terminal block]DFY1h type electric energy metering joint junction box

2026-6-18 13:16:58

DFY1h type electric energy metering joint junction box

Product specifications: 3X380/220V

[terminal block]DFY1e type electric energy metering joint junction box

2026-6-18 13:16:49

DFY1e type electric energy metering joint junction box

Product specifications: 3X380/220V, semi enclosed/fully enclosed

[terminal block]DFY1c type electric energy metering joint junction box

2026-6-18 13:16:41

DFY1c type electric energy metering joint junction box

Product specifications: 3X380/220V, fully enclosed

[terminal block]DFY1a type electric energy metering joint junction box

2026-6-18 13:16:24

DFY1a type electric energy metering joint junction box

3X380/220V�� Semi closed/fully closed

[terminal block]DFY1n type electric energy metering joint junction box

2026-6-18 13:16:15

DFY1n type electric energy metering joint junction box

3X380/220V

[terminal block]HV hook shaped pre insulated end

2026-6-18 13:16:14

HV hook shaped pre insulated end

Wire cross-section: 0.5-1.5 mm ² (American Wire Gauge 22-16) Maximum current: Imax=19A Material: Copper Material thickness: 0.75mm
Model number	Size (mm)							color
Model number	American bolt number	Bolt mouth diameter d2 (mm)	B	L	F	H	D��	color
HV1.25 - 3.5	#6	three point seven	eight	twenty-one	seven	ten	four point three	red
HV1.25 - 4	#8	four point three	eight	twenty-one	seven
HV1.25 - 5	#10	five point three	eight	twenty-one	seven
HV1.25 - 6	1/4	six point five	eleven point six	twenty-seven	eleven point one

Wire cross-section: 1.5-2.5 mm² (American Wire Gauge 16-14) Maximum current: Imax=27A Material: Copper Material Thickness: 0.8mm
Model number	Size (mm)							color
Model number	American bolt number	Bolt mouth diameter d2 (mm)	B	L	F	H	D��	color
HV2 - 3.5	#6	three point seven	eight point five	twenty-two	seven point seven five	ten	four point nine	blue
HV2 - 4	#8	four point three	eight point five	twenty-two	seven point seven five
HV2 - 5	#10	five point three	nine point five	twenty-two	seven point seven five
HV2 - 6	1/4	six point five	twelve	twenty-seven	eleven

Wire cross-section: 4-6 mm² (American Wire Gauge 12-10) Maximum current: Imax=48A Material: Copper Material Thickness: 1.0mm
Model number	Size (mm)							color
Model number	American bolt number	Bolt mouth diameter d2 (mm)	B	L	F	H	D��	color
HV5.5 - 3.5	#6	three point seven	seven point two	twenty-one point four	five point nine	thirteen	six point seven	yellow
HV5.5 - 4	#8	four point three	nine point five	twenty-five point five	eight point two five
HV5.5 - 5	#10	five point three	nine point five	twenty-five point five	eight point two five
HV5.5 - 6	1/4	six point five	twelve	thirty-one point five	thirteen

Hook shaped pre insulated end (HV)

[terminal block]DFY1(JHV4A3-V11) type electric energy metering joint junction box

2026-6-18 13:16:07

DFY1 (JHV4A3-V11) type electric energy metering joint junction box

[terminal block]JXZ-600A type terminal post

2026-6-18 13:15:58

Main parameters of JXZ-600A terminal post

Specification: [M12 × 85mm]
Terminal current: 600A
Test voltage withstand: 3KV
Panel opening: 16mm x 16mm square hole

[terminal block]200A-400A High current terminal

2026-6-18 13:15:50

The 200A-400A high current terminal is mainly used for incoming and outgoing lines in electrical cabinets

Features: The connecting insulation components are made of materials with high insulation performance, which are sturdy and durable; Can withstand strong external forces without damage; The terminal wiring is convenient

[terminal block]DL Aluminum terminal block

2026-6-18 13:15:41

Model Type	Main dimensions (mm)
Model Type	��	D	d	L	L1	B
DL-1-16	eight point five	ten	six	seventy	thirty-two	sixteen
DL-1-25	eight point five	twelve	seven	seventy-five	thirty-four	eighteen
DL-1-35	ten point five	fourteen	eight point five	eighty-five	forty	twenty point five
DL-1-50	ten point five	sixteen	nine point five	ninety	forty-two	twenty-three
DL-1-70	twelve point five	eighteen	eleven point five	one hundred and two	forty-seven	twenty-six
DL-1-95	twelve point five	twenty-one	thirteen point five	one hundred and twelve	fifty	twenty-eight
DL-1-120	fourteen point five	twenty-three	fifteen	one hundred and twenty	fifty-three	thirty
DL-1-150	fourteen point five	twenty-five	sixteen point five	one hundred and twenty-six	fifty-five	thirty-four
DL-1-185	sixteen point five	twenty-seven	eighteen point five	one hundred and thirty-three	fifty-eight	thirty-seven
DL-1-240	sixteen point five	thirty	twenty-one	one hundred and forty	sixty	forty
DL-1-300	twenty-one	thirty-four	twenty-three	one hundred and sixty-five	sixty-five	forty-five
DL-1-400	twenty-one	thirty-eight	twenty-six	one hundred and seventy	seventy	fifty
DL-1-500	twenty-one	forty-two	twenty-nine	one hundred and ninety	seventy-five	sixty
DL-1-630		fifty-four	thirty-four	two hundred and twenty-five	eighty	eighty
DL-1-800		sixty	thirty-eight	two hundred and seventy	ninety	one hundred

DL aluminum terminal block

[terminal block]DTL type terminal block

2026-6-18 13:15:33

DTL type terminal block is a national standard copper aluminum terminal block

Model Catalog No	Main dimensions (mm)
Model Catalog No	��	D	d	L	L1	B
DTL-1-10	eight point five	ten	six	sixty-eight	twenty-eight	sixteen
DTL-1-16	eight point five	eleven	six	seventy	thirty-two	sixteen
DTL-1-25	eight point five	twelve	seven	seventy-five	thirty-four	eighteen
DTL-1-35	ten point five	fourteen	eight point five	eighty-five	thirty-eight	twenty point five
DTL-1-50	ten point five	sixteen	nine point seven	ninety	forty	twenty-three
DTL-1-70	twelve point five	eighteen	eleven point five	one hundred and two	forty-seven	twenty-six
DTL-1-95	twelve point five	twenty-one	thirteen point five	one hundred and twelve	fifty	twenty-eight
DTL-1-120	fourteen point five	twenty-three	fifteen	one hundred and twenty	fifty-three	thirty
DTL-1-150	fourteen point five	twenty-five	sixteen point five	one hundred and twenty-six	fifty-five	thirty-four
DTL-1-185	sixteen point five	twenty-seven	eighteen point five	one hundred and thirty-three	fifty-eight	thirty-seven
DTL-1-240	sixteen point five	thirty	twenty-one	one hundred and forty	sixty	forty
DTL-1-300	twenty-one	thirty-four	twenty-three	one hundred and sixty-five	sixty-five	fifty
DTL-1-400	twenty-one	thirty-eight	twenty-six point five	one hundred and seventy	seventy	fifty

DTL type terminal block

[terminal block]ST12 series terminal block

2026-6-18 13:15:24

The ST12 series terminal blocks are made of non combustible engineering plastics, which have the advantages of good insulation performance and high mechanical strength. They are widely used for secondary wiring of various types of spring operated and electromagnetic mechanisms.

[terminal block]EV tubular pre insulated end

2026-6-18 13:15:16

EV tubular pre insulated end

Working limit temperature: 105 Ui=300V End material: Copper tube
Model number	Size (mm)						Wire area mm²	Insulation sleeve color (left) for Germany (right) for France
	F	L	W	D��	C��	A.W.G
E1508	eight	fourteen point three zero	two point six	one point three	one	#22	zero point five	Orange and white
E1510	ten	sixteen point three
E1512	twelve	eighteen point three
E1515	fifteen	twenty-one point three	two point eight	one point five	one point two	#20	zero point seven five	White Blue
E1518	eighteen	twenty-four point three
E2508	eight	fifteen point four
E2510	ten	seventeen point four
E2512	twelve	nineteen point four	three	one point seven	one point four	#18	one	Yellow and Red
E2525	twenty-five	twenty-five point four
four thousand and nine	nine	twenty point five
E4010	ten	twenty-six point five
E4012	twelve	twenty point eight	three point five	two	one point seven	#16	one point five	Red Black
E4018	eighteen	twenty-five point four
E6012	twelve	twenty point five
E6018	eighteen	twenty-six point five	four	two point six	two point three	#14	two point five	Blue Grey
E50-20	twenty	thirty-six
E50-25	twenty-five	forty-one
E70-20	twenty	thirty-seven	four point four	three point two	two point eight	#12	four	Grey Orange
E70-25	twenty-five	forty-two
E95-25	twenty-five	forty-four
E120-27	twenty-seven	forty-seven point six	six point three	three point nine	three point five	#10	six	Black Green
E150-32	thirty-two	fifty-seven point six
E10-12	twelve	twenty point eight	seven point six	four point nine	four point five	#7	ten	Milk white brown (brown) color
E10-18	eighteen	twenty-six point eight
E16-12	twelve	twenty-two	eight point eight	six point two	five point eight	#5	sixteen	Green milky white
E16-18	eighteen	twenty-eight
E25-16	sixteen	twenty-four	eleven point two	seven point nine	seven point five	#4	twenty-five	Brown (Brown) Black
E25-22	twenty-two	twenty-seven
E35-16	sixteen	thirty	twelve point seven	eight point seven	eight point three	#2	thirty-five	taupe
E35-25	twenty-five	thirty-nine
E50-20	twenty	thirty-six	fifteen point three	ten point nine	ten point three	#1	fifty	olive

Tube shaped pre insulated end (EV)

[terminal block]SV Flange fork shaped pre insulated end

2026-6-18 13:15:07

SV flange fork shaped pre insulated end

Wire cross-section: 0.5-1.5 mm²(American Wire Gauge 22-16) Maximum current: Imax=19A Material: Copper Material Thickness: 0.75mm
Model number	Size (mm)							color
Model number	American bolt number	Bolt mouth diameter d2 (mm)	B	L	F	H	D��	color
FSV 1.25 - 3.5	#6	three point seven	seven point five	nineteen	five point one	ten	four point three	red
FSV 1.25 - 4	#8	four point three	seven point five	nineteen	five point one
FSV 1.25 - 5	#10	five point three	seven point five	nineteen	five point one

Wire cross-section: 1.5-2.5 mm²(American Wire Gauge 16-14) Maximum current: Imax=27A Material: Copper Material Thickness: 0.8mm
Model number	Size (mm)							color
Model number	American bolt number	Bolt mouth diameter d2 (mm)	B	L	F	H	D��	color
FSV 2 - 3.5	#6	three point seven	seven point five	two point three seven	five point two	ten	four point nine	blue
FSV 2 - 4	#8	four point three	seven point five	twenty-three point seven	five point two
FSV 2 - 5	#10	five point three	seven point five	twenty-three point seven	five point two

Wire cross-section: 4-6 mm²(American Wire Gauge 12-10) Maximum current: Imax=48A Material: Copper Material Thickness: 1.0mm
Model number	Size (mm)							color
Model number	American bolt number	Bolt mouth diameter d2 (mm)	B	L	F	H	D��	color
FSV 5.5 - 3.5	#6	three point seven	eight point five	twenty-five point five	seven point five	thirteen	six point seven	yellow
FSV 5.5 - 4	#8	four point three	eight point five	twenty-five point five	seven point five
FSV 5.5 - 5	#10	five point three	eight point five	twenty-five point five	seven point five

Flange fork shaped pre insulated end (SV)

[terminal block]LBV Insulated sleeve folded corner terminal

2026-6-18 13:14:59

LBV insulated sleeve folded corner terminal

Wire cross-section: 0.5-1.5 mm²(American Wire Gauge 22-16) Maximum current: Imax=19A Material: Copper Material Thickness: 0.75mm
Model number	size					color
	B	L	F	H	D��
LBV 1.25 - 3	three	twenty-six point eight	sixteen point eight	ten	four point three	red
LBV 1.25 - 4.6	four point six	twenty-six point eight	sixteen point eight

Wire cross-section: 1.5-2.5 mm²(American Wire Gauge 16-14) Maximum current: Imax=27A Material: Copper Material Thickness: 0.8mm
Model number	size					color
	B	L	F	H	D��
LBV 2 - 3	three	twenty-six point eight	sixteen point eight	ten	four point nine	blue
LBV 2 - 4.6	four point six	twenty-six point eight	sixteen point eight

Wire cross-section: 4-6 mm²(American Wire Gauge 12-10) Maximum current: Imax=48A Material: Copper Material Thickness: 1.0mm
Model number	size					color
	B	L	F	H	D��
LBV 5.5 - 3	three	twenty-nine point three	sixteen point eight	thirteen	six point seven	yellow
LBV 5.5 - 4.6	four point six	twenty-nine point three	sixteen point eight

Concave pre insulated end (LBV)

[terminal block]LSV Lock shaped pre insulated end

2026-6-18 13:14:42

Wire cross-section: 0.5-1.5 mm²(American Wire Gauge 22-16) Maximum current: Imax=19A Material: Copper Material Thickness: 0.75mm
Model number	Size (mm)							color
Model number	American bolt number	Bolt mouth diameter d2 (mm)	B	L	F	H	D��	color
LSV 1.25 - 3.5	#6	three point seven	six point four	twenty-one point two	six point five	ten	four point three	red
LSVS 1.25 - 4	#8	four point three	seven point two	twenty-one point two	six point five
LSVL 1.25 - 4	#8	four point three	eight point one	twenty-one point two	six point five
LSVS 1.25 - 5	#10	five point three	eight point one	twenty-one point two	six point five
LSVL 1.25 - 5	#10	five point five	nine point five	twenty-seven point two	six point five

²(American Wire Gauge 16-14) Maximum current: Imax=27A Material: Copper Material Thickness: 0.8mm
Model number	Size (mm)							color
Model number	American bolt number	Bolt mouth diameter d2 (mm)	B	L	F	H	D��	color
LSV 2 - 3.5	#6	three point seven	six	twenty-one point two	six point five	ten	four point nine	blue
LSVS 2 - 4	#8	four point three	seven point two	twenty-one point two	six point five
LSVL 2 - 4	#8	four point three	eight point one	twenty-one point two	six point five
LSVS 2 - 5	#10	five point three	eight point one	twenty-one point two	six point five
LSVL 2 - 5	#10	five point three	nine point five	twenty-one point two	six point five

Wire cross-section: 4-6 mm²(American Wire Gauge 12-10) Maximum current: Imax=48A Material: Copper Material Thickness: 1.0mm
Model number	Size (mm)							color
Model number	American bolt number	Bolt mouth diameter d2 (mm)	B	L	F	H	D��	color
LSV 5.5 - 3.5	#6	three point seven	eight point three	twenty-five point two	seven point five	thirteen	six point seven	yellow
LSV 5.5 - 4	#8	four point three	eight point three	twenty-five point two	seven point five
LSV 5.5 - 5	#10	five point three	nine	twenty-three point nine	seven point five
LSV 5.5 - 6	1/4	six point four	twelve	thirty-one point two	twelve

Lock Lock Pre Insulated End (LSV)

[terminal block]BN type intermediate bare joint

2026-6-18 13:14:33

BN type intermediate bare joint material: copper tube
Model number	Size			Wire cross-section
Model number	d��	D��	l	A.W.G	mm²
BN 1.25	one point seven	three point three	fifteen	22 - 28	0.5 - 1.0
BN 2	two point three	four	fifteen	16 - 14	1.5 - 2.5
BN 3.5	three	five	fifteen	14 - 12	2.5 - 4
BN 5.5	three point four	five point five	fifteen	12 - 10	4 - 6
BN 8	four point five	seven point one	twenty-one	#8	ten
BN 14	five point eight	nine	twenty-six	#6	sixteen
BN 22	seven point seven	eleven point four	twenty-nine	#4	twenty-five
BN 38	nine point four	thirteen point three	thirty-two	#2	thirty-five
BN 60	eleven point four	fifteen point four	thirty-six	1/0	fifty
BN 70	thirteen point three	seventeen point five	thirty-seven	2/0	seventy
BN 80	fourteen point five	nineteen point four	thirty-eight	3/0	ninety-five
BN 100	sixteen point four	twenty-two	thirty-eight	4/0	one hundred and twenty
BN 150	nineteen point five	twenty-six point five	fifty-four	250 - 300 MCM	one hundred and fifty
BN 180	twenty-one	twenty-eight point five	fifty-seven	300 - 350 MCM	one hundred and eighty-five
BN 200	twenty-four	thirty-two point five	sixty-three	400 MCM	two hundred and forty
BN 325	twenty-eight	thirty-seven	seventy-two	500 - 600 MCM	three hundred

[terminal block]PVT Short fully insulated intermediate joint

2026-6-18 13:14:25

PVT short fully insulated intermediate joint

Material: Copper Insulation Material: PVC
Model number	Wire cross-section		Size (mm)			Maximum current	color
Model number	A.W.G	mm²	l	d��	L	Maximum current	color
PVT 1.25	22 - 16	0.5 - 1.5	eight	one point seven	sixteen	19A	red
PVT 2	16 - 14	1.5 - 2.5	eight	two point three	sixteen	27A	blue
PVT 5.5	12 - 10	4 - 6	eight point five	three point four	twenty point five	48A	yellow

Short fully insulated intermediate joint (PVT)

[terminal block]BV Long fully insulated intermediate joint

2026-6-18 13:14:16

BV elongated fully insulated intermediate joint

Material: Copper Insulation Material: PVC
Model number	Wire cross-section		Size (mm)			Maximum current	color
Model number	A.W.G	mm²	l	d��	L	Maximum current	color
BV 1.25	22 - 16	0.5 - 1.5	fifteen	one point seven	twenty-six	19A	red
BV 2	16 - 14	1.5 - 2.5	fifteen	two point three	twenty-six	27A	blue
BV 5.5	12 - 10	4 - 6	fifteen	three point four	twenty-six	48A	yellow
BV 8	#8	6 - 10	twenty-one	four point five	thirty-two	62A	red
BV 14	#6	10 - 16	twenty-six	five point eight	forty-two	88A	blue
BV 22	#4	16 - 25	twenty-nine	seven point seven	fifty	115A	yellow
BV 38	@2	35 - 50	thirty-two	nine point four	fifty-five	160A	red

Long fully insulated intermediate joint (BV)

[terminal block]Shoulder back shaped male and female pre insulated ends

2026-6-18 13:14:07

PBDD shoulder back shaped male and female pre insulated terminals

Wire cross-section: 0.5-1.5 mm²(American Wire Gauge 22-16) Maximum current: Imax=10A Material: Brass
Model number	NEMA TAB(mm)	Size (mm)
Model number	NEMA TAB(mm)	B	B1	H	D��	d��	L
PBDD 1.25 - 250	0.8 x 6.35	seven point four	six point three five	ten	three point eight	one point seven	twenty-one point five

Wire cross-section: 1.5-2.5 mm²(American Wire Gauge 16-14) Maximum current: Imax=15A Material: Brass
Model number	NEMA TAB(mm)	Size (mm)
Model number	NEMA TAB(mm)	B	B1	H	D��	d��	L
PBDD 2 - 250	0.8 x 6.35	seven point four	six point three five	ten	four point three	two point three	twenty-one point five

Wire cross-section: 4-6 mm²(American Wire Gauge 12-10) Maximum current: Imax=24A Material: Brass
Model number	NEMA TAB(mm)	Size (mm)
Model number	NEMA TAB(mm)	B	B1	H	D��	d��	L
PBDD 5.5 - 250	0.8 x 6.35	seven point four	six point three	thirteen	five point seven	three point four	twenty-five

Shoulder back shaped male and female pre insulated terminals (PBDD)

[terminal block]FDFD type fully insulated female plug terminal

2026-6-18 13:13:59

FDFD type fully insulated female plug terminal

Wire cross-section: 0.5-1.5 mm²(American Wire Gauge 22-16) Maximum current: Imax=10A Material: Brass
Model number	NEMA TAB(mm)	Size (mm)
Model number	NEMA TAB(mm)	B	D��	d��	L
FDFD 1.25 - 187(5)	0.5 x 4.75	five point six	three point eight	one point seven	twenty
FDFD 1.25 - 187(8)	0.8 x 4.75	five point six	three point eight	one point seven	twenty
FDFD 1.25 - 250	0.8 x 6.35	seven point four	three point eight	one point seven	twenty-one point five

Wire cross-section: 1.5-2.5 mm²(American Wire Gauge 16-14) Maximum current: Imax=15A Material: Brass
Model number	NEMA TAB(mm)	Size (mm)
Model number	NEMA TAB(mm)	B	D��	d��	L
FDFD 2 - 187(5)	0.5 x 4.75	five point six	four point three	two point three	twenty
FDFD 2 - 187(8)	0.8 x 4.75	five point six	four point three	two point three	twenty
FDFD 2 - 250	0.8 x 6.35	seven point four	four point three	two point three	twenty-one point five

Wire cross-section: 4-6 mm²(American Wire Gauge 12-10) Maximum current: Imax=24A Material: Brass
Model number	NEMA TAB(mm)	Size (mm)
Model number	NEMA TAB(mm)	B	D��	d��	L
FDFD 5.5 - 250	0.8 x 6.35	seven point four	five point seven	three point four	twenty-five

Female fully insulated joint (FDFD)

[terminal block]MDD Fully insulated male socket terminal

2026-6-18 13:13:32

MDD fully insulated male plug terminal

Wire cross-section: 0.5-1.5 mm²(American Wire Gauge 22-16) Maximum current: Imax=10A
Model number	NEMA TAB(mm)	material thickness	Size (mm)					color
Model number	NEMA TAB(mm)	material thickness	B	d��	D��	L	H	color
MDD 1 - 110(5)	0.5 x 2.8	zero point five	2.8 / .110	one point seven zero	four point three	18.5 / .728	ten	red
MDD 1 - 110(8)	0.8 x 2.8	zero point eight	2.8 / .110	one point seven zero	four point three	18.5 / .728
MDD 1 - 187(5)	0.5 x 4.75	zero point five	4.75 / .189	one point seven zero	four point three	19.0 / .748
MDD 1 - 187(8)	0.8 x 4.75	zero point eight	4.75 / .189	one point seven zero	four point three	190. / .748
MDD 1 - 250	0.8 x 6.35	0.4 x 2	6.35 / .250	one point seven zero	four point three	21.0 /.827

Wire cross-section: 1.5-2.5 mm²(American Wire Gauge 16-14) Maximum current: Imax=15A
Model number	NEMA TAB(mm)	material thickness	Size (mm)					color
Model number	NEMA TAB(mm)	material thickness	B	d��	D��	L	H	color
MDD 2 - 187(5)	0.5 x 4.75	zero point five	4.8 / .189	two point three	four point three	19.0 / .748	ten	blue
MDD 2 - 187(8)	0.8 x 4.75	zero point eight	4.8 / .189	two point three	four point three	19.0 / .748
MDD 2 - 250	0.8 x 6.35	0.4 x 2	6.35 / .250	two point three	four point three	21.0 /.827

Wire cross-section: 4-6 mm²(American Wire Gauge 12-10) Maximum current: Imax=24A
Model number	NEMA TAB(mm)	material thickness	Size (mm)					color
			B	d��	D��	L	H
MDD 5.5 - 250	0.8 x 6.35	0.4 x 2	6.35 / .250	three point four	five point seven	24.0 / .945	thirteen	yellow

Public pre insulated joint (MDD)

[terminal block]PTN Needle shaped bare end

2026-6-18 13:13:23

PTN needle shaped bare end

Wire cross-section: 0.5-1.5 mm²(American Wire Gauge 22-16) Maximum current: Imax=19A
model	Size/Talent
model	F	L	E	D��	d��
PTN 1 - 9	1.9 / .075	13.8 / .543	four point eight	three point four	one point seven
PTN 1 - 10	1.9 / .075	14.8 / .583
PTN 1 - 12	1.9 / .075	16.8 / .661
PTN 1- 13	1.9 / .075	17.8 / .740
PTN 1 - 18	1.9 / .075	22.8 / .819

Wire cross-section: 1.5-2.5 mm²(American Wire Gauge 16-14) Maximum current: Imax=27A
model	Size/Talent
model	F	L	E	D��	d��
PTN 2 - 9	1.9 / .075	13.8 / .543	four point eight	four point one	two point three
PTN 2 - 10	1.9 / .075	14.8 / .583
PTN 2 - 12	1.9 / .075	16.8 / .661
PTN 2 - 13	1.9 / .075	17.8 / .740
PTN 2 - 18	1.9 / .075	22.8 / .819

Wire cross-section: 4-6 mm²(American Wire Gauge 12-10) Maximum current: Imax=48A
model	Size/Talent
model	F	L	E	D��	d��
PTN 5- 13	2.8 / .110	20.0 / .787	six point eight	five point six	three point four

[terminal block]PTV Needle shaped pre insulated end

2026-6-18 13:13:14

Needle shaped pre insulated terminal (PTV)

Wire cross-section: 0.5-1.5 mm²(American Wire Gauge 22-16) Maximum current: Imax=19A
model	Size (mm)				color
model	F	L	H	D��	color
PTV 1.25 - 9	one point nine	nineteen	ten	four point three	red
PTV 1.25 - 10	one point nine	twenty
PTV 1.25 - 12	one point nine	twenty-two
PTV 1.25 - 13	one point nine	twenty-three
PTV 1.25 - 18	one point nine	twenty-eight

Wire cross-section: 1.5-2.5 mm²(American Wire Gauge 16-14) Maximum current: Imax=27A
model	Size (mm)				color
model	F	L	H	D��	color
PTV 2 - 9	one point nine	nineteen	ten	four point nine	blue
PTV 2 - 10	one point nine	twenty
PTV 2 - 12	one point nine	twenty-two
PTV 2 - 13	one point nine	twenty-three
PTV 2 - 18	one point nine	twenty-eight

Wire cross-section: 4-6 mm²(American Wire Gauge 12-10) Maximum current: Imax=48A
model	Size (mm)				color
model	F	L	H	D��	color
PTV 5.5 - 13	two point eight	twenty-five point five	twelve point five	six point seven	yellow

[terminal block]DBN chip shaped bare end

2026-6-18 13:13:06

Chip shaped bare end (DBN)

Wire cross-section: 4-6 mm²(American Wire Gauge 12-10) Maximum current: Imax=48A Material: Copper Material Thickness: 1.0mm
Model number	Size
Model number	B	L	F	H	D��	d��
DBN 5.5 - 10	two point eight	fourteen point eight	ten	six	five point six	three point four
DBN 5.5 - 14	four point five	twenty-one	fourteen
DBN 5.5 - 18	four point five	twenty-three	eighteen
DBN 8 - 14	five	twenty-two point five	fourteen	eight point five	seven point two	four point five
DBN 14 - 16	six	thirty point six	sixteen	fourteen	nine	six point five

DBN chip shaped bare end

[terminal block]DBV Sheet shaped pre insulated end

2026-6-18 13:12:57

Disc shaped pre insulated end (DBV)

Wire cross-section: 0.5-1.5 mm²(American Wire Gauge 22-16) Maximum current: Imax=19A Material: Copper Material Thickness: 0.75mm
Model number	Size					color
Model number	B	L	F	H	D��	color
DBV 1.25 - 10	two point three	twenty	ten	ten	four point three	red
DBV 1.25 - 11	three	twenty-one	eleven
DBV 1.25 - 14	three	twenty-four	fourteen
DBV 1.25 - 18	two point three	twenty-eight	eighteen

Wire cross-section: 1.5-2.5 mm²(American Wire Gauge 16-14) Maximum current: Imax=27A Material: Copper Material Thickness: 0.8mm
Model number	Size					color
Model number	B	L	F	H	D��	color
DBV 2 - 10	two point four	nineteen	nine	ten	four point nine	blue
DBV 2 - 14	two point four	twenty-four	fourteen
DBV 2 - 18	two point four	twenty-eight	eighteen

Wire cross-section: 4-6 mm²(American Wire Gauge 12-10) Maximum current: Imax=48A Material: Copper Material Thickness: 1.0mm
Model number	Size					color
Model number	B	L	F	H	D��	color
DBV 5.5 - 10	two point eight	twenty-two point five	ten	thirteen	five point six	yellow
DBV 5.5 - 14	four point five	twenty-six point five	fourteen
DBV 5.5 - 18	four point five	thirty point five	eighteen

DBV chip shaped pre insulated end

[terminal block]RNB Circular bare end

2026-6-18 13:12:49

RNB round bare end

Wire cross-section: 0.5-1.5 mm²(American Wire Gauge 22-16) Maximum current: Imax=19A
model	Size/inch
model	American bolt number	Bolt mouth diameter d2 ��	B	L	F	H	D��	d��
RNB1- 3	#4	3.2mm	5.7 / .216	12.6 / .492	four point nine five	four point eight	three point four	one point seven
RNBS1 - 3.5	#6	3.7mm	5.7 / .216	12.6 / .492	four point nine five
RNBM1 -3.5	#6	3.7mm	6.6 / .260	14.4 / .567	six point three
RNBL1 - 3.5	#6	3.7mm	8.0 / .315	15.8 / .567	seven
RNBS1 - 4	#8	4.3mm	6.6 / .260	14.4 / .567	six point three
RNBL1 - 4	#8	4.3mm	8.0 / .315	15.8 / .622	seven
RNB1 - 5	#10	5.3mm	8.0 / .315	15.8 / .622	seven
RNB1 - 6	1/4	6.5mm	11.6 / .457	21.8 / .858	eleven point one
RNB1 - 8	5/16	8.4mm	11.6 / .457	21.8 / .858	eleven point one
RNB1 - 10	3/8	10.5mm	13.6 / .535	25.5 / 1.004	thirteen point nine

Wire cross-section: 1.5-2.5 mm²(American Wire Gauge 16-14) Maximum current: Imax=27A
model	Size/inch
model	American bolt number	Bolt mouth diameter d2 ��	B	L	F	H	D��	d��
RNB2 - 3	#4	3.2mm	6.6 / .260	12.8 / .504	four point three	four point eight	four point one	two point three
RNBS2 - 3.5	#6	3.7mm	6.6 / .260	12.8 / .504	four point three
RNBM2 - 3.5	#6	3.7mm	6.6 / .260	16.0 / .661	seven
RNBL2 - 3.5	#6	3.7mm	8.5 / .335	16.8 / .661	seven point seven five
RNBS2 - 4	#8	4.3mm	6.6 / .260	16.0 / .661	seven
RNBL2 - 4	#8	4.3mm	8.5 / .335	16.8 / .661	seven point seven five
RNBS2 - 5	#10	5.3mm	8.5 / .335	16.8 / .661	seven point seven five
RNBL2 - 5	#10	5.3mm	9.5 / .374	16.8 / .661	seven point two five
RNB2 - 6	1/4	6.5mm	12.0 / .472	21.8 / .858	eleven
RNB2 - 8	5/16	8.4mm	12.0 /	21.8 /	eleven
RNB2 - 10	3/8	10.5mm	13.6 /	25.5 /	thirteen point nine

Wire cross-section: 2.5-4 mm²(American Wire Gauge 14-12) Maximum current: Imax=37A
model	Size/inch
model	American bolt number	Bolt mouth diameter d2 ��	B	L	F	H	D��	d��
RNB3- 4	#8	4.3mm	8.0 / 0335	18.0 / .661	seven point seven	six	five	three
RNBS3 - 5	#10	5.3mm	8.0 / .335	18.0 / .661	seven point seven
RNBL3 - 5	#10	5.3mm	12.0 / .472	21.4 / .858	seven point seven
RNB3 - 6	1/4	6.5mm	12.0 / .472	21.4 /.858	seven point seven

Wire cross-section: 4-6 mm²(American Wire Gauge 12-10) Maximum current: Imax=48A
model	Size/inch
model	American bolt number	Bolt mouth diameter d2 ��	B	L	F	H	D��	d��
RNB5 - 3.5	#6	3.7mm	7.2 /	16.8 / .661	five point nine	six point eight	five point six	three point four
RNBS5 - 4	#8	4.3mm	7.2 /	16.8 / .661	five point nine
RNBL5- 4	#8	4.3mm	9.5 /	21.8 / .858	eight point three
RNB5 - 5	#10	5.3mm	9.5 /	21.8 / .858	eight point three
RNB5 - 6	1/4	6.5mm	12.0 /	25.8 / 1.004	thirteen
RNB5.5 - 8	5/16	8.4mm	15.0 /	25.8 / 1.004	thirteen point seven
RNB5 - 10	3/8	10.5mm	15.0 /	30.4 / 1.197	thirteen point seven
RNB5 - 12	1/2	13.0mm	19.2 /	39.3 / 1.547	sixteen

[terminal block]SNB Fork shaped bare end

2026-6-18 13:12:40

SNB fork shaped bare end

Wire cross-section: 0.5-1.5 mm²(American Wire Gauge 22-16) Maximum current: Imax=19A
model	Size/inch
	American bolt number	Bolt mouth diameter	B	L	F	E	D��	d��
	American bolt number	d2	mm	mm	mm	mm	mm	mm
SNB1.25 - 3	#4	3.2mm	5.7 /	16.0 / .630	six point five	four point eight	three point four	one point seven
SNBS1.25 - 3.5	#6	3.7mm	5.7 /	16.0 / .630	six point five
SNBL1.25 - 3.5	#6	3.7mm	6.4 /	16.0 / .630	six point five
SNBS1.25 - 4	#8	4.3mm	6.4 /	16.0 / .630	six point five
SNBM1.25 - 4	#8	4.3mm	7.2 /	16.0 / .630	six point five
SNBL1.25 - 4	#8	4.3mm	8.1 /	16.0 / .630	six point five
SNBS1.25 - 5	#10	5.3mm	8.1 /	16.0 / .630	six point five
SNBL1.25 - 5	#10	5.3mm	9.5 /	16.0 / .630	six point five
SNBS1.25 - 6	1/4	6.5mm	9.5 /	16.0 / .630	six point five
SNBL1.25 - 6	1/4	6.5mm	12.0 /	22.0 / .866	eleven

Wire cross-section: 1.5-2.5 mm²(American Wire Gauge 16-14) Maximum current: Imax=27A
model	Size/Talent
	American bolt number	Bolt mouth diameter	B	L	F	E	D��	d��
	American bolt number	d2	mm	mm	mm	mm	mm	mm
SNB2 - 3	#4	3.2mm	5.7 / .224	16.0 / .630	six point five	four point eight	four point one	two point three
SNBS2 - 3.5	#6	3.7mm	5.7 / .224	16.0 / .630	six point five
SNBL2 - 3.5	#6	3.7mm	6.0 / .236	16.0 / .630	six point five
SNBS2 - 4	#8	4.3mm	6.4 / .254	16.0 / .630	six point five
SNBM2 - 4	#8	4.3mm	7.2 / .283	16.0 / .630	six point five
SNBL2 - 4	#8	4.3mm	8.1 / .319	16.0 / .630	six point five
SNBS2 - 5	#10	5.3mm	8.1 / 319	16.0 / .630	six point five
SNBL2 - 5	#10	5.3mm	9.5 / .366	16.0 / .630	six point five
SNBS2 - 6	1/4	6.5mm	9.5 / .366	16.0 / .630	six point five
SNBL2 - 6	1/4	6.5mm	12.0 / .472	22.0 / .886	eleven

Wire cross-section: 4-6 mm²(American Wire Gauge 12-10) Maximum current: Imax=48A
model	Size/Talent
	American bolt number	Bolt mouth diameter	B	L	F	E	D��	d��
	American bolt number	d2	mm	mm	mm	mm	mm	mm
SNB5- 3.5	#6	3.7mm	8.3 / .372	17.8 / .685	seven point five	six point eight	five point six	three point four
SNB5 - 4	#8	4.3mm	8.3 / .372	19.5 / .728	seven point five
SNB5 - 4	#8	4.3mm	9.0 / .354	19.5 / .728	seven point five
SNB5 - 5	#10	5.3mm	9.0 / .354	19.5 / .728	seven point five
SNB5 - 6	1/4	6.5mm	9.0 / .354	19.5 / .728	seven point five
SNB5 - 6	1/4	6.5mm	12.0 / .472	25.5 / .965	twelve
SNB5 - 8	5/16	8.4mm	14.0 / .551	23.5 / .925	eleven point five

[terminal block]SC copper wire terminal for peephole

2026-6-18 13:12:32

model	Bolt mouth diameter d2 �� (mm)	Size (mm)				Wire cross-section (mm)²)
		d��	D��	L1	L
SC 1.5 - 5	five point two	one point eight	three point seven	five	sixteen	one point five
SC 2.5 - 4	four point two	two point four	four	seven	eighteen	two point five
SC 2.5 - 5	five point two				twenty
SC 4 - 5	five point two	three point one	four point eight	seven	twenty	four
SC 4 - 6	six point five
SC 6 - 5	five point two	three point eight	five point five	nine	twenty-four	six
SC 6 - 6	six point five
SC 10 - 6	six point five	five	six point five	nine	twenty-six	ten
SC 10 - 8	eight point four
SC 16 - 6	six point five	five point seven	seven point five	eleven	thirty	sixteen
SC 16 - 8	eight point four
SC 25 - 6	six point five	seven point two	nine	thirteen	thirty-five	twenty-five
SC 25 - 8	eight point four
SC 35 - 8	eight point four	eight point five	ten point eight	thirteen point five	thirty-eight	thirty-five
SC 35 - 10	ten point five
SC 50 - 8	eight point four	nine point eight	twelve point five	sixteen	forty-four	fifty
SC 50 - 10	ten point five
SC 70 - 10	ten point five	eleven point five	fourteen point five	eighteen	fifty-one	seventy
SC 70 - 12	thirteen
SC 95 - 10	ten point five	thirteen point seven	seventeen	twenty-two	fifty-seven	ninety-five
SC 95 - 12	thirteen
SC 120 - 12	thirteen	fifteen	nineteen	twenty-four	sixty-four	one hundred and twenty
SC 120 - 16	seventeen
SC 150 - 12	thirteen	sixteen point seven	twenty-one	twenty-six	seventy-one	one hundred and fifty
SC 150 - 16	seventeen
SC 185 - 16	seventeen	eighteen point five	twenty-three	thirty	seventy-nine	one hundred and eighty-five
SC 240 - 16	twenty-one	twenty-one	twenty-six	thirty-eight	ninety-three	two hundred and forty
SC 240 - 20	seventeen
SC 300 - 16	seventeen	twenty-four point five	thirty	forty-two	one hundred and three	three hundred
SC 300 - 20	twenty-one
SC 400 - 16	seventeen	twenty-seven	thirty-four	forty-two	one hundred and thirteen	four hundred
SC 400 - 20	twenty-one
SC 500 - 16	seventeen	thirty	thirty-eight	forty-eight	one hundred and twenty-three	five hundred
SC 500 - 20	twenty-one
SC 630 - 20	twenty-one	thirty-five	forty-five	fifty-six	one hundred and thirty-five	six hundred and thirty
SC 800 - BL	-	thirty-nine	fifty	sixty	one hundred and seventy	eight hundred
SC 1000 - BL	-	forty-four	fifty-six	eighty-seven	two hundred	one thousand

SC peephole copper wire terminal

[terminal block]FDD type insulated socket terminal block

2026-6-18 13:12:23

FDD type insulated socket terminal

Wire cross-section: 0.5-1.5 mm²(American Wire Gauge 22-16) Maximum current: Imax=10A Material: Brass
Model number	NEMA TAB	material thickness	Size/inch					color
Model number	NEMA TAB	material thickness	B	d��	D��	L	H	color
FDD 1 - 110(5)	0.5 x 2.8	zero point three	3.2 / .126	one point seven	three point eight	19.6 / .772	ten	red
FDD 1- 110(8)	0.8 x 2.8	zero point three	3.2 / .126	one point seven	three point eight	19.6 / .772
FDD 1 - 187(5)	0.5 x 4.75	zero point three five	5.0 / .197	one point seven	three point eight	19.6 / .772
FDD 1 - 187(8)	0.8 x 4.75	zero point three five	5.0 / .197	one point seven	three point eight	19.6 / .772
FDD 1 - 205	0.8 x 5.2	zero point three five	6.6 / .260	one point seven	three point eight	20.0 / .787
FDD 1 - 250	0.8 x 6.35	zero point four	7.4 / .375	one point seven	three point eight	21.5 / .846

Wire cross-section: 1.5-2.5 mm²(American Wire Gauge 16-14) Maximum current: Imax=15A Material: Brass
Model number	NEMA TAB	material thickness	Size/inch					color
Model number	NEMA TAB	material thickness	B	d��	D��	L	H	color
FDD 2 - 110(5)	0.5 x 2.8	zero point three	3.2 /.126	two point three	four point three	19.6 / .772	ten	blue
FDD 2 - 110(8)	0.8 x 2.8	zero point three	3.2 / .126	two point three	four point three	19.6 / .772
FDD 2 - 187(5)	0.5 x 4.75	zero point three five	5.0 / .197	two point three	four point three	19.6 / .772
FDD 2 - 187(8)	0.8 x 4.75	zero point three five	5.0 / .197	two point three	four point three	19.6 / .772
FDD 2 - 205	0.5 x 5.2	zero point three five	6.6 / .287	two point three	four point three	20.0 / .787
FDD 2 - 250	0.8 x 6.35	zero point four	7.3 / .287	two point three	four point three	21.5 / .846

Wire cross-section: 4-6 mm²(American Wire Gauge 12-10) Maximum current: Imax=24A Material: Brass
Model number	NEMA TAB	material thickness	Size/inch					color
			B	d��	D��	L	H
FDD 5.5 - 250	0.5 x 6.35	zero point four	6.6 / .287	three point four	five point seven	25.0 / .925	thirteen	yellow

FDD type insulated socket terminal

[terminal block]RV Circular pre insulated end

2026-6-18 13:12:15

RV round pre insulated end

Wire cross-section: 0.5-1.5 mm²(American Wire Gauge 22-16) Maximum current: Imax=19A
Model number	Size/inch							color
	American bolt number	Bolt mouth diameter	B	L	F	H	D��
	American bolt number	d2	mm	mm	mm	mm	mm
RV1 - 3.2	#4	3.2mm	5.7 / .216	17.85 / .698	four point nine five	ten	four point three	red
RVS1- 3.7	#6	3.7mm	5.7 / .260	19.4 / .764	four point nine five
RVM1 - 3.7	#6	3.7mm	6.6 / .315	20.8 / .819	six point three
RVL1- 3.7	#6	3.7mm	8.0 / .260	19.4 / .764	seven
RVS1- 4	#8	4.3mm	6.6 / .315	20.8 / .819	six point three
RVL1 - 4	#8	4.3mm	8.0 / .315	20.8 / .819	seven
RV1- 5	#10	5.3mm	8.0 / .315	20.8 / .819	seven
RV1 - 6	1/4	6.5mm	11.6 / .457	26.8 / 1.055	eleven point one
RV1 - 8	5/16	8.4mm	11.6 / .457	26.8 / 1.055	eleven point one
RV1 - 10	3/8	10.5mm	13.6 / .535	31.6 / 1.201	thirteen point nine

Wire cross-section: 1.5-2.5 mm²(American Wire Gauge 16-14) Maximum current: Imax=27A
Model number	Size/inch							color
	American bolt number	Bolt mouth diameter	B	L	F	H	D��
	American bolt number	d2	mm	mm	mm	mm	mm
RV2 - 3	#4	3.2mm	6.6 / .260	17.8 / .701	four point three	ten	four point nine	blue
RVS2 - 3.5	#6	3.7mm	6.6 / .260	17.8 / .701	four point three
RVM2 - 3.5	#6	3.7mm	6.6 / .260	21.8 / .858	seven
RVL2 - 3.5	#6	3.7mm	8.5 / .335	19.4 / .764	seven point seven five
RVS2 - 4	#8	4.3mm	6.6 / .260	19.4 / .764	seven
RVL2 - 4	#8	4.3mm	8.5 / .335	21.8 / .858	seven point seven five
RVS2 - 5	#10	5.3mm	8.5 / .335	22.5 / .858	seven point seven five
RVL2 - 5	#10	5.3mm	9.5 / .374	22.5 / .858	seven point two five
RV2 - 6	1/4	6.5mm	12.0 / .472	26.8 / 1.055	eleven
RV2 - 8	5/16	8.4mm	12.0 / .472	26.8 / 1.055	eleven
RV2 - 10	3/8	10.5mm	12.0 / .472	26.8 / 1.055	thirteen point nine

Wire cross-section: 2.5-4 mm²(American Wire Gauge 14-12) Maximum current: Imax=37A
Model number	Size/inch							color
	American bolt number	Bolt mouth diameter	B	L	F	H	D��
	American bolt number	d2	mm	mm	mm	mm	mm
RV3.5 - 4	#8	4.3mm	8.0 / .315	24.5 / .984	seven point seven	twelve point five	six point two	black
RVS3.5 - 5	#10	5.3mm	8.0 / .315	24.5 / .984	seven point seven
RVL3.5 - 5	#10	5.3mm	12.0 / .472	28.4 / 1.181	nine point four
RV3.5 - 6	1/4	6.5mm	12.0 / .472	28.4 / 1.181	nine point four

Wire cross-section: 4-6 mm²(American Wire Gauge 12-10) Maximum current: Imax=48A
Model number	Size/inch							color
	American bolt number	Bolt mouth diameter	B	L	F	H	D��
	American bolt number	d2	mm	mm	mm	mm	mm
RV5.5 - 3.5	#6	3.7mm	7.2 / .283	21.4 / .894	five point nine	twelve point five	six point seven	yellow
RVS5.5 - 4	#8	4.3mm	7.2 / .283	21.4 /.894	five point nine
RVL5.5 - 4	#8	4.3mm	9.5 / .374	25.5 / 1.047	eight point three
RV5.5 - 5	#10	5.3mm	9.5 / .374	25.5 /1.047	eight point three
RV5.5 - 6	1/4	6.5mm	12.0 / .472	31.5 / 1.260	thirteen
RV5.5 - 8	5/16	8.4mm	15.0 / .472	33.7 /1.339	thirteen point seven
RV5.5 - 10	3/8	10.5mm	15.0 / .591	33.7 / 1.339	thirteen point seven
RV5.5 - 12	1/2	13.0mm	19.2 / .756	38.1 / 1.520	sixteen

[terminal block]SV Fork shaped pre insulated end

2026-6-18 13:12:06

Wire cross-section: 0.5-1.5 mm²(American Wire Gauge 22-16) Maximum current: Imax=19A
Model number	Size/inch							color
	American bolt number	Bolt mouth diameter	B	L	F	H	D��
	American bolt number	d2	mm	mm	mm	mm	mm
SV1 - 3.2	#4	3.2mm	5.7 / .323	21.2 / .827	six point five	ten	four point three	red
SVS1 - 3.7	#6	3.7mm	5.7 / .252	twenty-one point two	six point five
SVL1- 3.7	#6	3.7mm	6.4 / .283	twenty-one point two	six point five
SVS1.25 - 4	#8	4.3mm	6.4 / .252	twenty-one point two	six point five
SVM1.25 -4	#8	4.3mm	7.2 / .283	21.2 / .827	six point five
SVL1.25 - 4	#8	4.3mm	8.1 / .319	twenty-one point two	six point five
SVS1.25 - 5	#10	5.3mm	8.1 / .319	twenty-one point two	six point five
SVL1.25 - 5	#10	5.3mm	9.5 / .374	twenty-one point two	six point five
SVS1.25 - 6	1/4	6.5mm	9.5 / .374	twenty-one point two	six point five
SVL1.25 - 6	1/4	6.5mm	12.0 / .472	twenty-seven point two	eleven

Wire cross-section: 1.5-2.5 mmtwo(American Wire Gauge 16-14) Maximum current: Imax=27A
Model number	Size/inch							color
	American bolt number	Bolt mouth diameter	B	L	F	H	D��
	American bolt number	d2	mm	mm	mm	mm	mm
SV2 - 3.2	#4	3.2mm	5.7 / .224	21.2 / .827	six point five	ten	four point nine	blue
SVS2 - 3.7	#6	3.7mm	5.7 / .224	twenty-one point two	six point five
SVL2 - 3.7	#6	3.7mm	6.0 / .236	twenty-one point two	six point five
SVS2 - 4	#8	4.3mm	6.4 / .252	twenty-one point two	six point five
SVM2 - 4	#8	4.3mm	7.2 / .283	twenty-one point two	six point five
SVL2 - 4	#8	4.3mm	7.9 / .311	21.2 / .827	six point five
SVS2 - 5	#10	5.3mm	7.9 / .311	twenty-one point two	six point five
SVL2 - 5	#10	5.3mm	9.3 / .366	twenty-one point two	six point five
SVS2 - 6	1/4	6.5mm	9.3 / .311	twenty-one point two	six point five
SVL2 - 6	1/4	6.5mm	12.0 / .472	27.2/ 1.063	eleven

Wire cross-section: 2.5-4 mmtwo(American Wire Gauge 14-12) Maximum current: Imax=37A
Model number	Size/inch							color
	American bolt number	Bolt mouth diameter	B	L	F	H	D��
	American bolt number	d2	mm	mm	mm	mm	mm
SV3 - 3.7	#6	4.3mm	8.0 / .315	25.3 / .996	seven	twelve point five	six point two	black
SV4 - 5	#10	5.3mm	8.0 / .315	25.3 / .996	seven
SV5 - 6	1/4	6.5mm	12.0 / .472	28.3 / .112	twelve point one

Wire cross-section: 4-6 mmtwo(American Wire Gauge 12-10) Maximum current: Imax=48A
Model number	Size/inch							color
	American bolt number	Bolt mouth diameter	B	L	F	H	D��
	American bolt number	d2	mm	mm	mm	mm	mm
SVS5 - 3.7	#6	3.7mm	8.3 / .327	24.4 / .961	seven point five	twelve point five	six point seven	yellow
SVS5 - 4	#8	4.3mm	8.3 / .327	25.5 / .004	seven point five
SVL5 - 4	#8	4.3mm	9.0 / .283	24.4 / .961	seven point five
SVS5 - 5	#10	5.3mm	9.0 / .283	25.5 / .004	seven point five
SVS5 - 6	1/4	6.5mm	9.0 / .283	25.5 / .004	seven point five
SVL5 - 6	1/4	6.5mm	12.0 / .472	31.5 / .240	twelve
SVS5 - 8	5/16	8.4mm	14.0 / .551	30.5 / .201	eleven point five

SV fork shaped pre insulated end

[terminal block]JD0 series terminal block

2026-6-18 13:11:58

The JD0 series terminal block is suitable for connecting wires in power and control circuits with rated voltage up to 380V and rated current of 60A.

Basic Parameters:
Rated voltage: 380V
Rated current: 10, 25, 60A

The JD0 series terminal block adopts a high and low groove guide rail fixing form, consisting of insulating parts, conductive parts, and fixing plates. There is a spring and a card board at the rectangular hollow slot of the insulation component for easy assembly, and they are clamped onto the high and low groove guide rails

[terminal block]JH10 series terminal block

2026-6-18 13:11:49

JH10 is suitable for low-voltage circuits with AC 50Hz (or 60Hz), rated voltage up to 660V, and rated current of 15~60A. It is used for wire end connection, distribution, and testing.

[terminal block]TD,JH9 series terminal block

2026-6-18 13:11:41

TD is suitable for connecting wires in power and control circuits with AC 50Hz (or 60Hz) rated voltage up to 660V and rated current up to 100A.

This series of wiring sockets adopts screw crimping connection, and the wire ends must be crimped with U-shaped or O-shaped ends before being connected to the wiring terminals. The wiring sockets are equipped with protective covers and installed using C-shaped mounting rails.

JH9 is suitable for connecting wires with AC 50Hz (or 60Hz), rated voltage up to 660V, and rated connection cross-section up to 25mm2.
This series of wiring sockets adopts screw crimping connection edges, and the wire ends must be crimped with U-shaped or O-shaped ends before they can be connected to the wiring terminals. The wiring sockets are equipped with protective covers and installed using C-shaped mounting rails.

[terminal block]JH5 series terminal block

2026-6-18 13:11:32

The JH5 series terminal block is suitable for connecting wires in circuits with rated voltage up to 500V and rated electrical connection surface up to 25mm2.

[terminal block]JH2 series terminal block

2026-6-18 13:11:24

JH2 is suitable for AC 50HZ (or 60Hz), rated voltage up to 500V or DC 440V. It is used for connecting wires with a rated connection cross-section up to 35mm2.

The JH2 series terminal block adopts a stepped locking cylindrical screw connection structure, which is firmly pressed and anti vibration and anti loosening. Multiple strands of wire should be connected to the terminal block after crimping the tube shaped end.

Use G-type installation rail for installation.

[terminal block]B1 series terminal block

2026-6-18 13:11:15

The B1 series terminal block is suitable for low-voltage operation control circuits with AC 50Hz, rated voltage up to 250V, and rated current of 20A. It is used for wire end connection, branching, and testing purposes.

[terminal block]TB series terminal block

2026-6-18 13:11:07

The TB series terminal block is suitable for connecting wires in circuits with AC 50Hz, rated voltage up to 600V, and rated current up to 100A.

[terminal block]JH1 series terminal block

2026-6-18 13:10:58

The JH1 series terminal block is suitable for AC 50HZ (or 60HZ) and rated voltage up to 500V (or DC 440V). It is used for connecting wires with a rated connection cross-section up to 35mm2. This series of wiring sockets has a compact structure and uses combination screws for easy wiring and maintenance. The wire end should be crimped with an O-shaped or U-shaped end, with low contact resistance and reliable contact after connection. G-type installation rail is used for installation, and protective covers are provided for the base and contact type wiring sockets.

[terminal block]JH6 series terminal block

2026-6-18 13:10:50

JH6 adopts a special track clamp and a stepped locking cylindrical screw connection structure. The pressure line is firm and resistant to earthquakes and looseness. Use G-type installation rail for installation.

[terminal block]D1 series terminal block

2026-6-18 13:10:41

The D1 series terminal block is suitable for connecting wires in distribution equipment, signal series, and protection devices with AC 50Hz (or 60Hz), rated voltage up to 500V, and rated current up to 100A.

[terminal block]JX2 series terminal block

2026-6-18 13:10:33

JX2 series terminal blocks are suitable for power and control circuits with rated voltage up to 380V and rated current up to 100A, and are used for wire end connections.

The JX2 series terminal blocks use insulated bases and hard connections connected in series with screws.

[terminal block]MJ Small busbar rack

2026-6-18 13:10:24

MJ small busbar rack

[terminal block]JXB series terminal block

2026-6-18 13:10:16

The JXB series terminal block is used for connecting wires in power and control circuits with voltages up to 660V and currents up to 100A.

[terminal block]TC series terminal block

2026-6-18 13:10:07

The TC series terminal block is suitable for connecting wires in circuits with AC 50Hz, rated voltage up to 600V, and rated current up to 25A.

[terminal block]JF5 series terminal block

2026-6-18 13:09:59

JF5 low seat enclosed terminal block is suitable for connecting circular wires with a frequency of 50Hz (or 60Hz), rated voltage up to 660V, or DC 440V, and a rated cross-section of 0.5-25mm2. Using combination screws with convenient wiring, paired with TU and TO terminals, and a universal G-type mounting rail.

[terminal block]SAK series terminal block

2026-6-18 13:09:50

The SAK series terminal blocks are suitable for power and control circuits with rated voltage up to 380V and rated current up to 100A, and are used for wire end connections. Insulated base and hard connection are used in series with screws.

[terminal block]TK series terminal block

2026-6-18 13:09:42

The TK series terminal block is suitable for connecting wires in power and control circuits with AC 50Hz (or 60Hz) rated voltage up to 660V and rated current up to 100A.

The TK series terminal blocks are connected by screw crimping, and the wire ends must be crimped with U-shaped or O-shaped ends before they can be connected to the terminal blocks. The wiring sockets are equipped with protective covers and installed using C-shaped mounting rails.

[terminal block]TZ1 series terminal block

2026-6-18 13:09:33

The TZ1 series terminal block is suitable for power transmission control panels, tables, cabinets with rated voltage up to 500V and rated current up to 100A, as well as machine tool electrical control, signal series, and various automation devices, for use in distribution or terminal connection.

[terminal block]JX5 series terminal block

2026-6-18 13:09:25

JX5 series terminal block

[terminal block]D series terminal block

2026-6-18 13:09:16

The D series terminal block is suitable for connecting wires with a rated voltage up to 500V, a rated current of 10A, and a rated cross-section not exceeding 2.5mm2. Mainly used for wire connection of internal and external instruments, signal systems, and electrical protection devices in industrial automation instrument panels.

[terminal block]H series terminal block

2026-6-18 13:09:07

The H series terminal block is suitable for connecting wires in circuits with AC 50Hz, rated voltage up to 660V, and rated current up to 115A. Installation using IEC standard G-type (high and low) guide rails.

[terminal block]J42 series terminal block

2026-6-18 13:08:59

The screws of the J42 series terminal block are made of high-strength alloy copper, the current bar is made of electrolytic copper, and the wire frame is made of stress crack resistant copper alloy. These metal surfaces are protected by nickel plating. Therefore, it has high corrosion resistance and good electrical conductivity.
The shell of J42 series terminal block is made of nylon 66, which has good pressure and temperature resistance and flame retardant level up to V0
structural characteristics
The J42 series terminal block has a screw self-locking function. The special structural treatment can cause elastic deformation of the wire frame when tightening the screw, gradually increasing the thread friction and achieving self-locking function.
The J42 series terminal blocks have good tensile strength. The horizontal stripes on the terminal current strip can cut open the possible oxide layer on the wire. Wiring terminals allow various wires to be wired without pre-processing.
Terminal classification
The J42 series wiring terminals are divided into universal terminals, grounding terminals, test terminals, fuse terminals, and knife switch terminals.