Shanghai Huabang Industrial Business Network - street light controller

[street light controller]AS10 Street light control automatic switch

2026-6-17 10:56:32

AS10 street light control automatic switch is suitable for general factory, school, street lights, and navigation beacon lights on water and islands. During the day, the on duty personnel turn off the lights, and when it gets dark, they turn on the lights. Often leads to failure to turn on or off lights in a timely manner. This not only wastes electricity, but also affects work.
During the day, the light is strong and the photosensitive element releases the relay, causing the street lamp to not light up; When it gets dark to a certain extent in the evening, the photosensitive element activates the switch until it is turned off the next morning, and this cycle continues;

Power supply voltage: 220V, human, load current 10A,
Control resistive bulbs to below 2000 watts, and fluorescent lamps and other inductive lamps to below 300 watts

[street light controller]SDK-9 latitude and longitude intelligent street light controller

2026-6-17 10:56:23

The SDK-9 intelligent street lamp controller adopts the most advanced computer control technology from abroad, using the operating laws of the sun and the earth, as well as the relationship between the earth's longitude and latitude and sunrise and sunset. Based on the seasonal changes, the longitude and latitude algorithm is applied to calculate the sunrise and sunset time. It also has the functions of fine adjustment of switch time and midnight control, which can adapt to the needs of different geographical environments. It is the best time controller for street lamps, advertising light boxes, neon lights and other equipment; It can be widely used in all places that require time control, such as streets, railways, waterways, industrial and mining areas, schools, and power supply departments.

Features
1. Adopting advanced foreign microprocessor chips, high reliability, small error, and strong stability.
2. With power-off data protection, the clock works continuously without the need to replace the battery, maintaining the clock's operation for more than ten years.
Group 0 working mode: The lighting time can be set by the user, ranging from 00:00 to 23:59; The turning off time can be set by the user, ranging from 00:00 to 23:59. The switch time is the same in the same month, but different switch times can be set for different months.
4. One set of all night working mode: Control the on/off time according to latitude and longitude, and adjust it reasonably with seasonal changes. The on/off light time is automatically adjusted every day, and there is a fine adjustment function for the on/off time, ranging from -50 to 50. Turn on/off the light in the negative direction in advance and delay it in the positive direction.
5. One set of midnight working mode: Control the turning on time according to latitude and longitude, and the turning off time can be set by the user, ranging from 00:00 to 23:59, which can effectively save energy.
�� It has automatic/manual conversion, which is convenient for the maintenance of electrical equipment or the needs of major celebrations.
Strong anti-interference ability, high-power relay output, can be connected to 220V or 380V contactors, with a long service life.

technical parameters
Working voltage: 220V ± 30%
Working frequency: 50Hz
Working temperature: -40 ��~+70 ��
Output current: 10A
Whole machine power consumption: 1W
Timing error: 30s/year
Control interval: 24 hours
Minimum step size: 1 minute
Number of time periods: 0 groups, 1 month, 1 group, adjusted daily
Working mode: 0 sets of user settings, 1 set of latitude and longitude control

Factory settings
1. Time parameter: SL-1,0-OH
2. Longitude: 120 degrees
Latitude: 30 degrees
Month, day, hour, and minute have all been set. In general, users do not need to make any modifications.
5. Parameters can also be set according to user requirements.

[street light controller]SDK-6 Computerized (latitude and longitude) intelligent street light controller

2026-6-17 10:56:14

The SDK-6 computerized (latitude and longitude) intelligent street light controller uses a dedicated computer chip to automatically determine the on/off time according to the local latitude and longitude and seasonal changes. Users do not need to input specific switch times (the local latitude and longitude are pre-set at the factory). The controller can be put into normal use.
The controller has two outputs, A, B, and each can be set to three modes: "all night light" (turn on in the evening until early morning), "midnight light" (turn on in the evening until late at night), and "2 on 2 off" (turn on the midnight light again in the early morning). At the factory, route A is set to full night light and route B is set to midnight light mode.

To save power consumption, the controller operates normally with a flashing second signal. In addition to the control status indication of channels A and B. Do not display any other content. Press any button or when the power is just turned on, the current clock will be displayed and will turn off after 1 minute.
2. Query switch time
The query button allows you to view the actual on/off time for the current day and any other day. Press the 'Query' button to immediately start sequentially querying the switch time. Each time you press the 'Query' button, the display content changes, and the display order is as follows:

Changes to the date during the query process do not affect the actual running calendar clock within the controller; The query process will not interfere with the output control status of channels A and B. After the query is completed, press and hold the "Query" button for more than 2 seconds, or stop pressing the button for 1 minute. Restore the display clock.
3. Adjustment of control parameters (setting method)
By setting, the clock of the controller can be adjusted. Change the originally set latitude and longitude, and modify the control mode of A and B routes: the switch time determined by latitude and longitude can be adjusted within ± 120 minutes.
In the clock display state, press the "Settings" button for more than 2 seconds to enter the settings state; After entering the setting state, the output control remains unchanged from the original state.
There must be a current modification item flashing in the setting state. The contents that can be set are: hour, minute, second, year, month, day, longitude (east longitude), latitude (east longitude), latitude (north latitude), evening light on time, morning light off time, A route working mode (A=1, 2, 3 respectively represent all night, midnight, 2 on 2 off), B route working mode, half night light off time (used in conjunction with midnight light and 2 on 1 mode).
Use the "+" and "-" keys to adjust the current flashing content, press the "Search/Move" key to move the current flashing content, and press the "Set/Line Break" key to change pages; After modification, hold down the "Settings/Line Break" button for more than 2 seconds. Or stop pressing the button for 3 minutes, save the edited and modified content, exit the settings state, and restore the display clock.

4. Manual emergency light on
Press the 'Manual' button for more than 2 seconds. A. The B output immediately turns on the light, and the panel indicates "manual"; Press again to restore to automatic mode.
5. Light sensing control with light control controller
Type 6 controller is the basic type; The light control controller has added light sensing input. Based on the determination of the switch time according to latitude and longitude, fuzzy mathematical methods are used to process the changes in natural light. The lights are turned on appropriately in the evening on rainy days, with a maximum advance time of 30 minutes. Once the light is turned on, it will not switch frequently due to fluctuations in lighting.
The benchmark value for comparison adopts a self-tuning intelligent fine-tuning method, which does not require manual adjustment; The automatic calibration technology used can eliminate the detection error of actual illumination caused by different installation conditions of the photosensitive device and the drift of device parameters during long-term operation. The requirements for installing a light control controller are: it should be able to feel natural light and not be disturbed by other artificial lighting except for the street lamps it controls.
6. Technical parameters
6.1 Working power supply: AC 220V ± 20%
6.2 Power consumption of the whole machine: �� 2W in the light on state, �� 1W in other states
6.3 Output control: Two outputs, with a maximum current of 10A per output
6.4 Timing accuracy: Error ��± 0.5S/d (room temperature 23 ��± 3 ��)
6.5 Built in power supply: high-energy lithium battery, continuous power-off working time �� 5 years
6.6 Storage temperature: -40 �� to+80 ��
Working temperature: -15 ��~+60 ��
Humidity:<90%
6.7 Scope of application: Longitude: 80.0 °~135.9 ° Latitude: 10.0 °~56.0 °
7. Appendix: Reference for Longitude and Latitude of Major Cities in China

SDK-6 computer-based (latitude and longitude) intelligent street light controller

[street light controller]GUK-84(80A) series street lamp light control fully automatic switch

2026-6-17 10:56:06

GUK-84 (80A) series street lamp light control fully automatic switch

[street light controller]GUK-83(60A) series street lamp light control fully automatic switch

2026-6-17 10:55:57

GUK-83 (60A) series street lamp light control fully automatic switch

[street light controller]GUK-82(40A) series street lamp light control fully automatic switch

2026-6-17 10:55:48

GUK-82 (40A) Series Street Light Control Fully Automatic Switch

[street light controller]GUK-81(10A) series street lamp light control fully automatic switch

2026-6-17 10:55:40

GUK-81 (10A) series street lamp light control fully automatic switch

[street light controller]KG-F Probe type street lamp light control fully automatic switch

2026-6-17 10:55:31

KG-F probe type street lamp light control fully automatic switch

[street light controller]GK-10X Street light control automatic switch

2026-6-17 10:55:20

GK-10X Street Light Control Automatic Switch

Street lights for general factories, schools, and streets, and navigation beacon lights for water islands. The on duty personnel will turn off the lights during the break and turn them on again when it gets dark. It often leads to not turning on or off the lights in a timely manner, which not only wastes electricity but also affects work.

Based on relevant information from various sources, advanced integrated circuits from abroad have been introduced, and a practical streetlight automatic switch has been modified based on the streetlight switch previously produced by our factory. This switch is not affected by weather seasons, has reliable functions, high sensitivity, and is popular throughout the country, highly favored by users.

Working principle and structure
The circuit is equipped with a delay circuit, which has the anti-interference ability to prevent accidental lightning, flashlights, cars, and other light from shining on the photoelectric head, and to prevent the false opening and closing of the power supply components caused by falling leaves.
The automatic switch of street lamps is composed of a photoelectric conversion device, namely a photoelectric head and integrated block, electronic components, actuating relays, and AC contactors. During the day, the light intensity is strong, and the current of the photosensitive element increases, causing the relay of the integrated circuit to release and the street lamp to not light up. When it gets dark to a certain degree in the evening, due to the weakened light intensity, the voltage generated by the photosensitive element is low, and the relay attracts the street lamp to light up until the next morning. The integrated trigger for enhanced light intensity automatically operates again and the street lamp goes out.

Installation and Use of GK-10X Street Light Control Automatic Switch
��1�� Install the automatic switch on the wire post where the street lamp is placed or in a place with natural light. Pay attention to cleaning and promptly or regularly wipe off the dust on the automatic switch head to avoid affecting the photoelectric conversion effect. The middle knob of the automatic switch terminal of the street lamp is used to adjust sensitivity, which can be adjusted in both forward and reverse directions. Depending on the local weather conditions, the relay will be closed when it needs to be turned on at night, and released when it needs to be turned off during the day.
��2�� Automatic switch terminal from left to right:
(1) For power input
(2) Shared for the centerline
(3) For power output

Technical Specifications for GK-10X Street Light Control Automatic Switch
1. Power supply voltage: AC 220V (if other power sources are used, please specify when ordering)
2. Contact capacity: A, 220V
3. Relay contact: 1A

5�� Wiring diagram

GK-10X Street Light Control Automatic Switch

[street light controller]JWK-1 Jingwei Intelligent Street Light Controller

2026-6-17 10:55:10

JWK-1 Jingwei Intelligent Street Light Controller

1. Scope of use: 70-136 ° E longitude, 5-60 ° N latitude, suitable for use throughout the country.
2. Clock error: ± 1 second/day.
3. One way output: midnight light/all night light, with a user adjustable range of ± 99 minutes for turning on and off the lights, and the time for turning off the lights can be customized by the user.
Two way output: midnight light/all night light, with a user adjustable range of ± 99 minutes for turning on the light, and the user can customize the turning off time.
4. Output power: 220VAC/3A/10A
5. Working voltage: 220VAC/50/60Hz.
6. Power outage data protection time: four months.
7. Environmental temperature: -20 to+60 �� (if below -20 ��, internal insulation accessories can be added)
8. Environmental humidity:<95%
9. Dimensions: 125 × 82 × 68mm
10. Weight: 365g

[street light controller]JGK-3 Rain proof light controlled delayed streetlight switch

2026-6-17 10:55:02

JGK-3 Rainproof Light Control Delay Street Lamp Switch

AC working voltage: 160-250VAC Static power consumption current: �� 1mA
Environmental working temperature: -25 ��~55 �� Light control output status: light intensity off, light dark conduction on
Direct control power: 2000W Adjustable illumination range: 1-300Lx or customized products with 300 LUX or more according to user requirements
Illuminance control hysteresis: 2Lx output memory delay: 15-30 seconds
Delay time: 1-8 hours Adjustable external dimensions: 85 × 65 × 40mm

Specification Model	terminal	neutral wire	Control power	load type	explanation
JGK-3	three	have	220VAC 10A/3A	arbitrary	AC220V
JGK-3/T	three	have	According to voltage	arbitrary	AC/DC12-48V
Overall Dimensions	85 × 65 × 40 millimeters	Fixed hole spacing		29 millimeters

[street light controller]JGK-2 Rain proof light controlled street light switch

2026-6-17 10:54:53

JGK-2 street light automatic control switch is a new type of light automatic control switch. The input terminal of the controller is connected to AC 220V voltage. When the external light is strong, the output is turned off. When the light is dim to a certain extent, the controller is turned on and outputs AC 220V voltage. It can be used in places that require light control, such as street lamps, advertising light boxes, holiday lights, etc., to achieve automatic control.

The controller is equipped with hysteresis control and output memory delay circuit, which can ensure normal operation in rainy days and environments with short-term light interference. The controller panel is equipped with a metering adjustment knob to meet the needs of users in different installation scenarios.
JGK-2 street light automatic control switch can provide products with various voltages of 12V, 24V, 36V, and 48V for AC and DC operation according to user requirements.

Performance indicators:
AC working voltage: 160-250V Static power consumption current: �� 1mA
Environmental working temperature: -25 ��~55 �� Light control output status: light intensity off, light dark conduction on
Direct control power: 2000W Adjustable illumination range: 1-300Lx or customized products with 300 LUX or more according to user requirements
Illuminance control hysteresis: 2Lx output memory delay: 15-30 seconds
Dimensions: 85 × 65 × 40mm

Installation and usage instructions:
When installing, full consideration should be given to the lighting effect, while avoiding interference from self controlled lighting or other light sources to ensure the reliable operation of the controller.
This controller can adjust the starting illumination by adjusting the adjustment knob on the bottom panel. Turning counterclockwise increases the starting illumination, while turning counterclockwise decreases it. Please refer to the LED indicator when adjusting. When the illumination is higher than the starting illumination, the LED will be on. Otherwise, the LED will turn off, and the relay will close after a delay of 15-30 seconds.
This controller should be equipped with appropriate fuses according to the size of the load to prevent damage caused by short circuits. Please follow the wiring diagram and do not connect the fire and neutral wires in reverse. When the controlled load power is too high, an AC contactor can be installed to increase the control power.
This controller has a rainproof function and can be installed outdoors. When installing, pay attention to the downward direction of the leads.

Specification Model	terminal	neutral wire	Control power	load type	explanation
JGK-2	three	have	220VAC 10A/3A	arbitrary	AC220V
JGK-2/T	three	have	According to voltage	arbitrary	AC/DC12-48V
Overall Dimensions	85 × 65 × 40 millimeters	Fixed hole spacing		29 millimeters

[street light controller]GUK8 series street light automatic control switch

2026-6-17 10:54:44

Main technical data

Wiring method

GUK8 series street light automatic control switch