Shanghai Huabang Industrial Business Network - Programmable controller

[Programmable controller]KMM Programmable Regulator

2026-6-17 11:23:34

KMM programmable regulator is a digital regulator that distributes functions to a single circuit, and is a precision instrument with PID control function and various other auxiliary functions.

Main Technical Instructions for KMM Programmable Regulator
Input and output parts

project				specification
Input section	Analog input	Input points		five o'clock
		input voltage		1��5V d.c
		Input bias current		-Below 1 �� A
		input method		Differential input
		Maximum allowable input voltage		DC+30V maximum
	Digital input	Input points		5 points (programmable 4 points, external interlocking signal 1 point)
		input voltage		LOW 0��4V��HIGH 10��30V
		Input bias current		LOW~3mA below, HIGH10 �� A below
		Maximum allowable input voltage		DC30V maximum
Output section	analog output	voltage output	Output points	three o'clock
			output voltage	DC 1��5V
			output impedance	250��
			output method	Differential type
		current output	Output points	1 point (converting one point of voltage output into current through V/I conversion)
			output current	DC4��20mA
			output impedance	250K��
			Allowable load	600��
			output method	Negative end shared
	Digital output	Output points		4 pieces (programmable 3 points, standby state output 1 point)
		output method		Transistor output (open collector)
		Contact capacity		DC 30V�� 0.1A (resistive load)

KMM Programmable Regulator General Specifications

Basic model		Select Specification		Additional specifications			content
Basic model		I	II	I	II	III	content
KMM							Programmable controller
	two hundred and eleven						Mask type automatic/manual/cascade SP can operate and self tune
		0					Main power supply DC24V
			0				PROM is pre made by the user
			one				Made by the manufacturer
				0			No communication interface
				one			There is a communication interface
					0		No data setter
					one		There is a data setter
						0	No backup manual unit available
						one	There is a backup manual unit (preset type)
						two	There is a backup handheld unit (tracking type)

[Programmable controller]KMP type programmable arithmetic unit

2026-6-17 11:23:26

The KMP programmable arithmetic unit is widely used in industrial automation such as metallurgy, chemical industry, petroleum, and power.
Model representation

Basic model	Select Specification		Additional specifications	content
Basic model	main power supply	PROM production	Additional specifications	content
KMP001				Composite arithmetic unit
	0			DC 24V
		0		PROM formation: Created by the user
		one		PROM formation: made by the manufacturer
			0	No communication interface
			-1	There is a communication interface

JSPW-04 Programming Interface Board
The JSPW-04 programming interface board is used for programming user programs for KMM programmable controllers and KMP programmable arithmetic units. It is compatible with IBM-PC, PC/XT, PC/AT or their fully compatible machines (such as Great Wall 05200530; Donghai 05200530) as an expansion board for PCs, and is driven by programming software to achieve the purpose of programming and creating user EPROMs.

[Programmable controller]DVP-10SX series programmable controller

2026-6-17 11:23:17

DVP-10SX series programmable controller

Slim Analog Host SX Series
Integrating digital, analog, communication, and display functions
Main functions and features:
10 host points (4DI+2DO+2AI+2DO)
8K Step Program Memory
Maximum 230 digit expansion points
30kHz high-speed counter, 50kHz pulse output
Built in RS-232 and RS-485 dual communication ports
Slave mode Modbus ASCII/RTU can be selected
Can connect 8 analog and temperature expansion modules
PID, PLC Easy Link (16 stations), 1600 file buffer, 168 application instructions
Built in 2AD (12 bit resolution) and 2DA (12 bit resolution)

[Programmable controller]SS series programmable controller

2026-6-17 11:23:09

The SS series PLC has a rich instruction set and various expansion modules. Its ultra small size and two independent communication ports make it widely used in industrial control and civilian fields.

Main functions and features:
14 point host, expandable up to 256 points, can connect up to 8 analog modules
Built in RS-232 and RS-485 ports
RUN/STOP operation switch
The volume of the cigarette box size meets the customer's space requirements
Detachable terminal block
A/D, D/A, AX, PT module types are complete
DC power supply 24VDC power supply
CE UL certification

SS series host
model	explanation
DVP14SS11R2	Host at 14:00, in at 8:00, out at 6:00 (relay), DC power supply SLIM
DVP14SS11T2	Host at 14:00, in at 8:00, out at 6:00 (transistor), DC power supply SLIM

SS series expansion machine
model	explanation
DVP04AD-S	4-channel AI, 14 bit, non isolated channel, DC power supply, built-in RS485 SLIM
DVP02DA-S	2-channel AO, 12 bit, non isolated channel, DC power supply, built-in RS485 SLIM
DVP06XA-S	4-channel AI, 2-channel AO, 12 bit, non isolated channel, DC power supply, built-in RS485 SLIM
DVP04PT-S	4-channel PT100, 14 bit (0.1 degrees Celsius), non isolated channel, DC power supply, built-in RS485 SLIM
DVP08SM11N	Expansion machine at 8 o'clock, input at 8 o'clock, DC power supply SLIM
DVP08SN11R	Expansion machine at 8 o'clock, relay at 8 o'clock, DC power supply SLIM
DVP08SN11T	8-point expansion machine, 8-point output (transistor), DC power supply SLIM
DVP08SP11R	8-point expansion machine, 4-point input, 4-point output (relay), DC power supply SLIM
DVP16SP11R	16 o'clock expansion machine, 8 o'clock in, 8 o'clock out (relay), DC power supply SLIM
DVP16SP11T	16 point expansion machine, 8-point input, 8-point output (transistor), DC power supply SLIM

SS series power module
model	explanation
DVPPS01	Power module, AC220V input, DC24V output, maximum output current 1A, SLIM

peripheral devices
model	explanation
DVPAADP01	HPP dedicated power supply (including DVPACAB315)
DVPHPP01	Handheld programmer (including DVPACAB115)
DVPHPP02	Handheld programmer (including DVPACAB115 and DVP-256FM)
DVP-256FM	FLASH MEMORY 256K
DVPACAB115	HPP and PLC connection cable 1.5m
DVPACAB215	PC or TP02/04G and PLC connection cable 8pin -9pin/25pin 1.5m
DVPACAB230	PC or TP02/04G and PLC connection cable 8pin -9pin/25pin 3.0m
DVPACAB2A30	PC or TP02/04G with PLC connection cable 8pin -9pin 3.0m
DVPACAB315	HPP and DVPAADP01 connection cable 1.5m
DVPACAB403	Expansion machine connection cable 30cm
DVPACAB515	TP02/04G programming cable 1.5m
DVPACAB530	TP02/04G connection cable 3.0m

SS series programmable controller

[Programmable controller]DVP-12SC series programmable controller

2026-6-17 11:23:01

DVP-12SC series programmable controller

Slim Positioning Host SC Series
Easy servo position control with built-in positioning function
Main functions and features:
Number of host points 12
8K Step Program Memory
Maximum 234 digit expansion points
100KHz high-speed counter, 100KHz pulse output (providing servo positioning instructions)
Built in RS-232 and RS-485 dual communication ports
Slave mode Modbus ASCII/RTU can be selected
Can connect 8 analog and temperature expansion modules
PID, PLC Easy Link (16 stations), 1600 file buffer, 171 application instructions
Provide servo position control instructions

[Programmable controller]SA series programmable controller

2026-6-17 11:22:52

SA series programmable controller

Main functions and features:
Number of host points 12
8K Step Program Memory
Maximum 236 digital expansion points
30kHz high-speed counter, maximum 50kHz pulse output
Built in RS-232 and RS-485 dual communication ports
Slave mode Modbus ASCII/RTU can be selected
Can connect 8 analog and temperature expansion modules
PID, PLC Easy Link (16 stations), 1600 file buffer, 168 application instructions

[Programmable controller]EH series programmable controller

2026-6-17 11:22:44

The main functions and features of EH series programmable controllers are:

16, 20, 32, 48, 60, 80 point hosts, expandable up to a maximum of 512 points
2-channel high-speed counting module up to 512KHZ
The maximum output of 2-channel transistors is 200KHZ, and the module can reach 512KHZ
16K program capacity, multiple function cards, expansion modules, and special modules
ASIC technology, powerful functionality, can run up to 0.2US in a single step
RUN/STOP operation switch with 2 potentiometers and detachable terminals

[Programmable controller]ES/EX series programmable controller

2026-6-17 11:22:35

The ES/EX series programmable logic controller PLC has a small size, rich instructions, and can be easily connected to a network to achieve complex control. It has a high cost performance ratio and is suitable for on-site detection and automatic control in various industries.

Main functions and features:
14/20/24/32/60 point host, expandable up to a maximum of 256 points
4K program capacity (EEPROM)
5kHz high-speed counting/2-channel 10kHz pulse output
Built in RS-232C and RS-485 (Modbus Master/Slave)

EX host with 4AI/2AO
Relay or transistor output
AC power input 100-240VAC (-15% -10%), DC power input 24VDC
CE UL certification

[Programmable controller]HITECH Human Computer Interface

2026-6-17 11:22:26

HITECH human-machine interface and ACE text display. This product is mainly used for monitoring and controlling programmable controllers, monitoring and modifying the values and status of PLC internal registers or relays in the form of visual text, indicator lights, animations, curves, etc. So that operators can control the machinery and equipment freely.

The hardware reliability of HITECH human-machine interface has been verified in various application scenarios around the world, and its quality has been recognized by customers. It is currently the most cost-effective product in the market, and its editing software is constantly updated and improved, with new features leading the human-machine interface industry.

[Programmable controller]DOP-A75CSTD Human Computer Interface

2026-6-17 11:22:18

The DOP-A75CSTD human-machine interface product features a 256 color STN color display, user-friendly interface, high-speed hardware structure, and presents users with a truly user-friendly and programmable input interface.

Product Features:

1. Support existing and future PLCs from various manufacturers
2. Quick execution of macros
3. Communication giant
4. USB upload/download

6. Two communication ports can use different protocols
7. Online/offline simulation
8. Support SMC card
9. Multiple password settings

DOP-A75CSTD Human Computer Interface Technical Specification:

Monitor: 7.5'STN (256 colors)
Resolution: 640 * 480 pixels
Backlight: CCFL * 2/20000Hrs
Display area size: 158 * 118mm
Touch screen: resistive type
Function keys: 6 keys
System key: 1 key
CPU type: 32-bit RISC microprocessor (266MHz)
Calendar: Built in
Application storage area: 7Mbytes Flash
System program storage area: 256Kbytes SRAM (using lithium battery)
Data temporary storage area: 32Mbytes SDRAM
Serial communication ports: COM1 (RS-232), COM2 (RS-232/RS-485/RS-422)

13. Expansion slot: 4~128Mbytes SMC card
Download ports: COM1 (RS-232), COM2 (RS-232/RS-485/RS-422), USB (Ver1.1)
14. Operating voltage: 24VDC (-10%~+15%)
15. Power consumption:<10W
16. Working temperature: 0 ° C~+50 ° C
17. Storage temperature: -20 ° C to+60 ° C
18. Operating humidity: 10~90% RH, no condensation
19. Protection level: IP65/NEMA4
20. Cooling method: Natural cooling
21. Appearance dimensions (W * H * D): 243.1mm * 178.1mm * 39mm
22. Hole size: (W * H): 231.4mm * 166.4mm
23. Weight: 950g

[Programmable controller]CPM2A Programmable Controller

2026-6-17 11:22:09

CPM2A Programmable Controller

power supply	output format	input	output	model
AC power supply	relay	twelve o'clock	eight o'clock	CPM2A/2AH-20CDR-A
DC power supply	relay			CPM2A-20CDR-D
	Transistor (drain type)			CPM2A-20CDT-D
	Transistor (source type)			CPM2A-20CDT1-D
AC power supply	relay	six p.m.	twelve o'clock	CPM2A/2AH-30CDR-A
DC power supply	relay			CPM2A-30CDR-D
	Transistor (drain type)			CPM2A-30CDT-D
	Transistor (source type)			CPM2A-30CDT1-D
AC power supply	relay	twelve p.m.	four p.m.	CPM2A/2AH-40CDR-A
DC power supply	relay			CPM2A-40CDR-D
	Transistor (drain type)			CPM2A-40CDT-D
	Transistor (source type)			CPM2A-40CDT1-D
AC power supply	relay	twelve p.m.	four p.m.	CPM2AH-S40CDR-A
AC power supply	relay	36 points	twelve p.m.	CPM2A/2AH-60CDR-A
DC power supply	relay			CPM2AE-60CDR-A
	relay			CPM2A-60CDR-D
	Transistor (drain type)			CPM2A-60CDT-D
	Transistor (source type)			CPM2A-60CDT1-D

CPM2A Programmable Controller

[Programmable controller]CJ1 series programmable controllers

2026-6-17 11:22:01

CJ1 series programmable controller

SYSMAC CJ2
From single device control to network connectivity and high speed·
High precision equipment control, CJ2 provides the ability to meet
CPU units with various control requirements.
Programmable controller
SYSMAC CJ1
Medium sized Omron universal PLC,
There is a CPU unit with built-in input/output type.

[Programmable controller]CP1H/1L series programmable controllers

2026-6-17 11:21:53

CP1H/1L series programmable controller

Combining numerous advantages into one.
With rich built-in functions,
Expanded the scope of applications
And for longer/more complex ladder diagram programs
The design time has also been shortened

[Programmable controller]ABB-AC500 Programmable Controller

2026-6-17 11:21:44

AC500 is a flexible and consistent expansion and upgrade product that can adapt to various automation tasks. Various related devices can be flexibly combined and used according to user needs, thereby minimizing inventory.

[Programmable controller]PCD46440 Programmable Controller

2026-6-17 11:21:36

Overview
The PCD46440 programmable controller is suitable for automatic control of building equipment, factory equipment, environmental equipment, automatic water supply and drainage equipment, etc. It can automatically adjust the operating status of various central air conditioning, chiller, water pump, dosing pump, solenoid valve, frequency converter and other systems according to various user requirements and under different external environmental conditions, to meet the monitoring and control of pressure, flow rate, temperature, water quality. This control can also be used for power monitoring, water supply and drainage control, and refrigeration station monitoring. Depending on the control object, various methods such as decentralized DDC control and distributed DDC control can be selected, making it flexible and reliable in operation.
Functions and features
1. Real time on-site measurement of switch signals and analog signals, displaying the measured values of the measured parameters on site in real time.
2. Real time modification of set values and control parameter values.
3. Fully automatic operation control.
4. Data power failure protection function.
5. Manual and automatic switching function.
6. Fieldbus CAN BUS communication function, RS-485 communication function.
7. Password protection: mainly to protect the settings within the system, so as to ensure that only authorized personnel can access and update
Data within the new system.
8. Timing control: The controller can be started and stopped according to the schedule set by the operator.
9. Small size: This product adopts a compact structure, so its installation is very free.
10. I./O module configuration: Depending on the required functionality, the input and output types can be selected, and the actual number of managed points can be increased or decreased.
11. Programmable: Strong programmability, able to directly program complex applications in C language.
12. It can be connected to the user interface module, so setting change operations can be implemented on the controller site.
13. Implement remote control through user terminals
Remote device operation/stop control and temperature setting change operations can be achieved by connecting to the user terminal.
14. Connection with the central monitoring system: By connecting to the central monitoring system through the CAN communication protocol, building equipment can be centrally managed.
15. Self discipline and decentralization: Even in the event of abnormalities in the central monitoring system, this product can independently perform backup operations, thus dispersing the risk of system failures.
16. Installation: DIN rail installation or screw installation can be selected.
17. High reliability, strong anti-interference ability, and overvoltage protection function.
18. Easy to operate.

PCD46440 Programmable Controller Specification

Project			specification
Power Specifications		rated voltage	DC 24V 50/60Hz
Power Specifications		Use power supply voltage	DC18��27.6V
input	Number inputs (6)	Passive input	switch signal
		active input	standard DC24V
		Pulse input
	Analog inputs (4)	voltage input	0��5V
		voltage input	0��10V
		Current input	0��20mA
		NTC, PT inputs	NTC10K��PT100�� PT1000
output	Digital outputs (4)	output method	voltage output
	Digital outputs (4)	output method	Dry touch Point output
	Analog outputs (4)	voltage output	0��10V
	Analog outputs (4)	current output	0��20mA
environmental conditions	Rated working conditions	ambient temperature	0��50��
		ambient humidity	10-90% RH (non condensing)
		vibration	Maximum 5.9m/s ^ 2 (0.6G) (10-150Hz)
	Transportation and storage conditions	ambient temperature	-20��60��
		ambient humidity	5-95% RH (non condensing)
		Vibration (storage)	Maximum 5.9m/s ^ 2 (0.6G) (10-150Hz)
communication	Optoelectronic isolated CAN network (Communication between controllers)	communication speed	1Mbps
		communication range	10km
	485 communication with optoelectronic isolation (Connect expansion board communication)	communication speed	78Kbps
		communication range	1.2km
Weight (kg)			0��9kg
Dimensions (mm)			168×115×40
Main material components			ABS�� beige
terminal block			Plug in terminal block, terminal spacing 5.08mm

[Programmable controller]VC6 series intelligent technology controller

2026-6-17 11:21:27

model

input

power supply

output

power supply

Input letter

Number polarity

coefficient

setting

signal

relay

output

external connection

zero clearing

AC85-

264V

DC24V

DC12V

biography

feel

device

use

PNP

zero point zero zero zero zero zero one

-999999

multiplication

operation

single

letter

number

J2 normally open

A normally closed

Nothing

NPN

J2 normally open

A normally closed

Nothing

PNP

J2 normally open

have

NPN

J2 normally open

have

VC6 series intelligent technology controller

[Programmable controller]GSK-100 series small programmable controller

2026-6-17 11:21:19

GSK-100 series small programmable controller

[Programmable controller]GSK-200 series small programmable controller

2026-6-17 11:21:10

GSK-200 series small programmable controller

[Programmable controller]DHC8A-2a type programmable time controller

2026-6-17 11:21:02

Delay range	Cycle every week or day	Display size	LCD
timing method	24 hours/12 hours	contact capacity	16A AC250V (twoNormally open)
Voltage	AC220V 50Hz 75%-110%
Overall dimensions	50X100X66mm	Electrical lifespan	�� 5X105 times
Delay error	�� 2 seconds/day	Installation method	Guide rail, device
Programmable numbers	8 times/week or day	Characteristics	Battery, power outage continues for 15 days

DHC8A-2a Programmable Time Controller

[Programmable controller]KSO1,KSO2 type programmable time controller

2026-6-17 11:20:53

Delay range	Daily cycle	Display size	LCD
timing method	-	cutout size	-
Voltage	AC220V 50Hz 75%-110%	work mode	-
Overall dimensions	123X60X688mm	Installation method	10A \| 16A wall socket
Delay error	�� 1 second/day	Other functions	-
Programmable numbers	8 times/day	Characteristics	Built in battery, continues to operate during power outages
contact capacity	10A AC250V\|16A AC250V	Number	twenty-four
Electrical lifespan	�� 5X105 times

KSO1, KSO2 Programmable Time Controllers

[Programmable controller]DHC12 Programmable Time Controller

2026-6-17 11:20:45

DHC12 Programmable Time Controller

Delay range	Daily cycle	Display size	LCD
timing method	24 hours/12 hours	contact capacity	16A AC250V (1 normally open and 1 normally closed)
Voltage	AC220V 50Hz 75%-110%	Electrical lifespan	�� 5X105 times
Overall dimensions	56X92X38mm	Installation method	Guide rail, device
Delay error	�� 2 seconds/day	Characteristics	Battery, power outage continues for 15 days
Programmable numbers	8 times/week or day

DHC12 Programmable Time Controller

[Programmable controller]DHC16-2a type programmable time controller

2026-6-17 11:20:36

Delay range	Cycle every week or day	Display size	LCD
timing method	24 hours/12 hours	contact capacity	25A AC250V (twoNormally open)
Voltage	AC220V 50Hz 75%-110%	Electrical lifespan	�� 5X105 times
Overall dimensions	72X115X52mm	Installation method	Guide rail, device
Delay error	�� 2 seconds/day	Characteristics	Battery, power outage continues for 15 days
Programmable numbers	8 times/week or day

DHC16-2a Programmable Time Controller

[Programmable controller]DHC15B Programmable Time Controller

2026-6-17 11:20:28

Voltage	AC 180V - 250V	Number of contacts	1 normally open, 1 normally closed
Timing error	�� 2 seconds/day (25 ��)	control the current	Resistive load: 16A/250VAC (COS Ø=1)
Set switch frequency	Open 6 times and close 6 times		Inductive load: 2.5A/250VAC (COS Ø=0.6)
Overall dimensions	36X81X66mm		Lamp current: 1000W
Power consumption	<4VA	Power outage memory	�� 15 days (after continuous power on for 48 hours)
Display size	LCD display	Usage temperature	-10��40��
Weight	About 125g	Humidity	35~85%RH
Electrical lifespan	105 times	Installation method	Guide rail, device
mechanical life	107 times

DHC15B Programmable Time Controller

[Programmable controller]DHC16-1a type programmable time controller

2026-6-17 11:20:19

Delay range	Cycle every week or day	Display size	LCD
timing method	24 hours/12 hours	contact capacity	25A AC250V
Voltage	AC220V 50Hz 75%-110%	output format	AC220V
Overall dimensions	72X115X52mm	Electrical lifespan	�� 5X105 times
Delay error	�� 2 seconds/day	Installation method	Guide rail, device
Programmable numbers	8 times/week or day	Characteristics	Battery, power outage continues for 15 days

DHC16-1a Programmable Time Controller

[Programmable controller]DHC15A series track type programmable time controller

2026-6-17 11:20:10

DHC15A series track type programmable time controller

Delay range	Cycle every week or day	Display size	LCD
timing method	24 hours/12 hours	contact capacity	16A AC250V (1 normally open and 1 normally closed)
Voltage	AC220V 50Hz 75%-110%	Electrical lifespan	�� 5X105 times
Overall dimensions	36X81X66mm	Installation method	Guide rail, device
Delay error	�� 2 seconds/day	Characteristics	Battery, power outage continues for 15 days
Programmable numbers	8 times/week or day

DHC15A series track type programmable time controller

[Programmable controller]DHC8A type programmable time controller

2026-6-17 11:20:02

Delay range	Cycle every week or day	Display size	LCD
timing method	24 hours/12 hours	contact capacity	16A AC250V DHC8A-1c (1 normally open and 1 normally closed)
Voltage	AC220V 50Hz 75%-110%		25A AC250V DHC8A-1a (1 normally open)
Overall dimensions	50X100X66mm	Electrical lifespan	�� 5X105 times
Delay error	�� 2 seconds/day	Installation method	Guide rail, device
Programmable numbers	8 times/week or day	Characteristics	Battery, power outage continues for 15 days

DHC8A Programmable Time Controller

[Programmable controller]DHC8 type programmable time controller

2026-6-17 11:19:54

Time range	Weekly or daily cycle	Display	LCD with backlight source
timing method	24 hours/12 hours	cutout size	45X45mm
Voltage	AC220V 50Hz 75%-110%	Installation method	panel
Overall dimensions	48X48X96mm	contact capacity	12A AC250V
Delay error	�� 2 seconds/day	Electrical lifespan	�� 5X105 times
Programmable numbers	8 times/week or day	Characteristics	Built in battery, power outage continues for 15 days

DHC8 Programmable Time Controller