Shanghai Huabang Industrial Business Network - mechanical counter

[mechanical counter]JQ-014 Hand operated four digit counter

2026-6-16 20:50:04

JQ014 Four Position Press Counter

Working principle and introduction: JQ014 counter is used to accumulate and record the number of back and forth movements of instruments or machinery, with digital direct reading display and zero return device. After returning to zero, accumulation counting can be started from "0000". Can be used for measuring and counting freight, pedestrians, and vehicles passing through medical, textile, mechanical, warehouse, and dock facilities.

[mechanical counter]JZR(RA4) Hand operated counter

2026-6-16 20:49:56

JZR (RA4) Hand operated Counter

Press the button to push the ratchet, perform decimal addition counting, and have a rotating zeroing device. The maximum accumulation is 9999, with a 1:1 pressing ratio and a technical speed of 300 times/minute. It is widely used in stations, docks, counting and tallying, as well as in public places for vehicle entry and exit, crowd counting, and so on.

[mechanical counter]JS-4 type timer

2026-6-16 20:49:47

JS-4 timer

[mechanical counter]JZ115 type small five digit table

2026-6-16 20:49:39

The JZ115 small five digit meter is designed based on the Z3-5 tachometer. It has the advantages of small size, beautiful appearance, convenient use, and more accurate counting. Mainly used for measuring and recording the depth of mine drilling and the number of winding machine turns. This table consists of five digits. The rotation direction of the shaft can be clockwise or counterclockwise, with clockwise rotation indicating acceleration and counterclockwise rotation indicating increase or decrease. The highest recorded number is 9999.9, with the first digit being 1/10 of the shaft's rotation. After one rotation of the shaft, it can automatically carry over.

The JZ115 small five digit meter is equipped with a reset mechanism. If a certain quantity is recorded, the reset button can be pressed to reset all of them, and then the second stage record can be made. But it cannot reset to zero during rotation. The installation of JZ115 small five digit meter should be smooth and concentric with the main body. Otherwise, it will cause the rotating spindle to twist or break, resulting in inaccurate counting or malfunction.
The maximum speed of this table is 150 revolutions per minute. If it is too fast, it may damage the internal components.
The JZ115 small five digit dial and gear system are made of special engineering plastics and should not come into contact with high temperatures or flammable gases. Oil must be added frequently to the bearings.

[mechanical counter]MRX-83 type counter

2026-6-16 20:49:30

MRX-83 Counter

[mechanical counter]JM316 series rolling counter

2026-6-16 20:49:18

The JM316 series rolling counter is designed according to needs and is used as a recorder for length and various mechanical transmissions. It is generally used for recording large quantities of length in textile, printing and dyeing, plastic film, artificial leather, and other industries.

The JM316 series rolling counter is a six digit number, and the rotation direction of the shaft can be clockwise or counterclockwise, with clockwise rotation increasing and counterclockwise rotation decreasing. The highest recorded number is 1-99999.9. When the second digit of the counter displays 1 and the record length is 1M, scroll around 3 times, and so on, rounding up to 10. The transmission ratio is 1:3, and the maximum counting speed is 360 revolutions per minute.
The counter is equipped with a reset mechanism. After recording a certain quantity, the reset button can be pressed to reset all the numbers, and then the second stage of recording can be made.
The counter jumps flexibly, counts correctly, and displays numbers clearly. The working environment temperature is between -15 �� and+55 ��, which can maintain normal counting.

[mechanical counter]67-1 type measuring counter

2026-6-16 20:49:10

The 67-1 type length measuring counter is an improvement on the Z73-5 tachometer, incorporating the advantages of a pull type counter. Suitable for measuring and recording the depth of mine drilling, cable length, and number of winding machine turns.
The 67-1 type length measuring counter is a mechanical transmission automatic carry up recorder. Equipped with a reset mechanism, after stopping the machine, rotate the character axis in the forward direction and reset all numbers to zero.
But it can only rotate the incremental recorder in the forward direction. Equipped with a reset mechanism, after stopping the machine, rotate the character axis in the forward direction and reset all numbers to zero. But it can only rotate in the forward direction for incremental recording, and cannot rotate in the reverse direction for decreasing.

The installation of the 67-1 type length measuring counter should be smooth and concentric with the main body. Otherwise, it will cause the rotating spindle to twist or break, resulting in inaccurate counting or malfunction.
The maximum speed of the 67-1 type length measuring counter is 150 times per minute. If it is too fast, it will damage the internal components.
The inner wheel and gear system are made of special engineering plastics and should not come into contact with high temperatures or thinners. Simply add a little engine oil during normal operation.

[mechanical counter]JC105 type mechanical length measuring counter

2026-6-16 20:49:00

The JC105 mechanical length counter is a counting device used to measure length. This counter uses the fixed length of two rollers to measure the length of the object being measured

The JC105 mechanical length counter is mainly used in industries such as textile, papermaking, printing and dyeing, leather making, and film production.

model	JC105
Display numerical specifications	Height x width, 6.5 mm x 3.8 mm
Maximum cumulative computing capacity	nine thousand nine hundred and ninety-nine point nine nine
rated speed	200r/mm (roller)
Wheel rotation distance (meters)/display data	1:1
Operating Temperature	-10�桫+50��

JC105 Mechanical Length Counter

[mechanical counter]JL056B Six bit Pull Counter

2026-6-16 20:48:52

JL056B six bit pull counter, used to record the cumulative number of back and forth movements of recording instruments or machinery. Connect the input shaft pull arm of the counter to the instrument or machine to perform pull counting. Digital direct reading display with a rotating zero return device. After returning to zero, it is still possible to start accumulating counting from zero. The JL056B counter is mainly used in industries such as textiles, machinery, circuit breakers, and mining.

model	JL056B six bit pull counter
Display numerical specifications	Height x Width 4.4 mm x 3 mm
Operating Temperature	-10�桫+50��
Maximum cumulative computing capacity	ninety-nine thousand nine hundred and ninety-nine
transmission ratio	1:1
Counting speed	�� 500 times/minute
Pull angle	Maximum pull angle 43o, minimum pull angle 38o
torque	��8 N·cm
Overall dimensions	79.8mm×32mm×46mm
Can be designed and produced according to customer needs

JL056B six bit pull counter

[mechanical counter]JL645M-A Five digit Pull type Mechanical Counter

2026-6-16 20:48:43

JL645M-A five position pull type mechanical counter is used to accumulate and record the number of mechanical reciprocating movements, without a reset mechanism. When the count reaches 99999, start counting the next cycle from 00000. The counting wheel of the counter is driven by internal teeth. When the counter lever is pulled, the propulsion mechanism connected to the lever causes the counting wheel to perform addition counting. This type of counter is mainly used in industries such as switchgear, experimental equipment, and printing equipment.

Display numbers	Height x Width 4mm x 2mm
Maximum cumulative computing capacity	ninety-nine thousand nine hundred and ninety-nine
Rated speed	300 times/minute
transmission ratio	1��1
Working environment temperature	�桫+50��
Working environment humidity	��85%
torque	��1N·cm
Pull angle	Minimum: 37 ° Maximum: 49 °
Can be designed and produced according to customer needs

JL645M-A Five Position Pull Mechanical Counter

[mechanical counter]JL545ZB series mechanical counter

2026-6-16 20:48:34

The JL545ZB series mechanical counter is used to accumulate and record the number of mechanical reciprocating movements, without a reset mechanism. When the count reaches 99999, you can start the next cycle from 00000. When the counter lever is pulled, the propulsion mechanism connected to the lever causes the counting wheel to perform addition counting.

The JL545ZB series mechanical counter is mainly used in high-voltage switchgear products, and can also be applied to testing equipment, printing equipment, etc.

model	JL545B	JL545M	JL545ZB		JL545ZM
Display numerical specifications	Height x Width 4 mm x 2 mm
Operating Temperature	-10�桫+50��
Maximum cumulative computing capacity	ninety-nine thousand nine hundred and ninety-nine
transmission ratio	1:1
Counting speed	�� 300 times/minute
Pull angle	Maximum pull angle 41 °, minimum pull angle 38 °
torque	��5 N·cm
characteristic	Pull right, pull the lever clockwise	Pull right, pull the lever counterclockwise		Pull left, pull the lever clockwise	Pull left, pull the lever counterclockwise
weight	About 23g
Can be designed and produced according to customer needs

[mechanical counter]SJ514 Counter

2026-6-16 20:48:26

Counting range	0000-9999
Counting speed	�� 300 times/minute
Count times/indication	1 : 1
Return-to-zero method	Push button type
Error	± 1+10000 counts
Temperature for rotating use	-10��--65��
Weight	70 grams

SJ514 counter

[mechanical counter]CCVPL mechanical mold counter

2026-6-16 20:48:17

The CCVPL mechanical mold counter is used to automatically remember the number of mold cycles and product quantities. Count range: 0-999999, not reset to zero. Let your molds truly be digitally managed.

Installation dimensions

CCVPL mechanical mold counter

[mechanical counter]JZ607B Type 7 Bit Mechanical Counter

2026-6-16 20:48:05

Z607B 7-bit mechanical counter

[mechanical counter]JZ095 series five digit mechanical counter

2026-6-16 20:47:57

Working principle and introduction:
The JZ095B series five digit mechanical counter can be used to measure the rotational speed of various types of machinery, measure the length and flow rate of produced products, as well as measure depth and height. Widely used in industries such as machinery, metallurgy, light industry, printing and dyeing. It is an essential tool for measurement and recording.

Technical parameters of JZ095 series five digit mechanical counter:

model	JZ095B	JZ095B-��	JZ095B-��	JZ095B-��	JZ095B-��	JZ095B-VI	JZ095B-X
Display numerical specifications	Height x Width: 6.5 mm x 3.8 mm
Operating Temperature	-10�桫+50��
Maximum cumulative computing capacity	nine thousand nine hundred and ninety-nine point nine nine			ninety-nine thousand nine hundred and ninety-nine			nine thousand nine hundred and ninety-nine point nine
transmission ratio	1:5	1:10		1:1		1:2	1:0.624
rated speed	��600r/min	��300r/min		��1000r/min			��600r/min
torque	��1 N·cm

Product installation dimension diagram:

JZ095 series five digit mechanical counter

[mechanical counter]JZ067B series mechanical rotation counter

2026-6-16 20:47:48

Working principle and introduction:

JZ067B series mechanical rotation counter is a counter used for flow meters, which achieves counting by driving a worm gear. This counter can also be used as a general mechanical rotation counter for accumulating and counting various measurement data.

Technical parameters of JZ067B series mechanical rotation counter:

model	JZ067B	JZ067B-��	JZ067ZB	JZ067ZB-��
Display numerical specifications	Height x Width 4.8 mm x 3.5 mm
Operating Temperature	-10�桫+50��
Maximum cumulative computing capacity	nine million nine hundred and ninety-nine thousand nine hundred and ninety-nine
transmission ratio	2:1
rated speed	160r/min
torque	��0.5 N·cm
characteristic	Short input shaft	Long input shaft	Left short input shaft	Left long input shaft

Product installation dimension diagram:

JZ067B series mechanical rotation counter

[mechanical counter]JZ054 type mechanical transmission counter

2026-6-16 20:47:40

JZ054 mechanical transmission counter is a counter for flow meters, which drives a helical gear to achieve a digital wheel count of 10. Rotate back to the component, and the counter can fully return to zero position. This counter can be used as a universal rotary counter for accumulating and counting various measurement data.

JZ054 type mechanical transmission counter

[mechanical counter]JQ014 series four digit press counter

2026-6-16 20:47:32

Working principle and introduction:

JQ014 series four digit press counter is used to accumulate and record the number of back and forth movements of instruments or machinery, with digital direct reading display and equipped with a zeroing device. After returning to zero, accumulation counting can still start from "0000". Can be used for counting the number of goods, pedestrians, and vehicles passing through medical, textile, mechanical, warehouse, and dock facilities.

Technical parameters of JQ014 series four digit press counter:

model	JQ014	JQ014-A	JQ014-B	JQ014-C
Display numerical specifications	Height x Width 4.4 mm x 3 mm
Operating Temperature	-10�桫+50��
Maximum cumulative computing capacity	nine thousand nine hundred and ninety-nine
transmission ratio	1:1
Counting speed	�� 200 times/minute
Pressing torque	��8 N·cm	��9 N·cm
characteristic	Yellow plastic shell	With a ring	With ring and frame	with base

Installation dimension diagram of JQ014 series four position press counter:

JQ014 series four digit press counter

[mechanical counter]JQ014A Type Four Position Press Counter

2026-6-16 20:47:23

Working principle and introduction:

The JQ014A four position press counter uses a push plate to push the ratchet wheel for decimal addition counting. The counter is equipped with a reset device to rotate the reset handle, and the accumulated numbers can all be reset to zero. The counter is mainly used for station and dock cargo handling; Statistics of the number of people entering and leaving sports fields, shops, and other areas, as well as statistics of passing vehicles.

JQ014A Four Position Press Counter Series and Related Technical Parameters:

Display numerical specifications	Height * width, mm4.4*3
Maximum accumulation specification	nine thousand nine hundred and ninety-nine
Press frequency/indication	1:1
Counting speed	�� 300 times/minute
quality	30g

[mechanical counter]JL144-B type mechanical counter

2026-6-16 20:47:14

Working principle and introduction:
The JL144-B mechanical counter is a subtractive preset counter. It relies on the swing of a lever on the right side of the counter to drive the ratchet wheel for subtraction counting. The pre-set values should be set by turning the word wheel one by one before each cycle. When the count reaches the set value, the displacement of the control rod inside the counter drives the stopping mechanism of the machine to perform braking, completing the control function.

JL144-B mechanical counter series and related technical parameters:

Display numerical specifications	Height * Width mm 4 * 2.6
Maximum cumulative computing capacity	nine thousand nine hundred and ninety-nine
transmission ratio	1:1
Counting speed	120 times/minute
torque	��9Ncm
quality	About 120 grams

Product installation dimension diagram:

JL144-B mechanical counter

[mechanical counter]JL085 Type Five Bit Pull Counter

2026-6-16 20:47:06

Working principle and introduction:
The JL085 five position pull counter is used to accumulate and record the number of mechanical reciprocating movements, without a reset mechanism. When the count reaches 99999, you can start the next cycle from 00000. The counting wheel of the counter is driven by internal teeth. When the counter lever is pulled, the propulsion mechanism connected to the lever causes the counting wheel to perform addition counting. This type of counter is mainly used in high-voltage switchgear products, and can also be applied to testing equipment, printing equipment, etc.

Product series and related technical parameters:

model	JL085	JL085-B	JL085ZM
Display numerical specifications	Height x Width 4 mm x 2 mm
Operating Temperature	-10�桫+50��
Maximum cumulative computing capacity	ninety-nine thousand nine hundred and ninety-nine
transmission ratio	1:1
Counting speed	�� 300 times/minute	�� 300 times/minute	�� 300 times/minute
Pull angle	Maximum pull angle 41o, minimum pull angle 37o
torque	��4.18 N·cm
characteristic	Pull right, pull the lever counterclockwise	Pull right, pull the lever clockwise	Pull left, pull the lever counterclockwise
weight	About 23g

Product installation dimension diagram:

JL085 Five Position Pull Counter

[mechanical counter]JL055B Type Five Bit Pull Counter

2026-6-16 20:46:57

Working principle and introduction:

The JL055B five digit pull counter is used to record the number of mechanical reciprocating movements. Pull the lever of the counter, and the push plate connected to the lever pushes the ratchet on the number wheel to perform decimal addition counting. The counter is equipped with a zeroing mechanism. Rotate the reset handle to reset all the accumulated numbers in the counter to zero. This counter is mainly used in industries such as machinery, circuit breakers, printing, and high and low voltage switches.

Product series and related technical parameters:

model	JL055B	JL055B	JL055M	JL055ZB	JL055ZM
Display numerical specifications	Height x Width 4 mm x 2 mm
Operating Temperature	-10�桫+50��
Maximum cumulative computing capacity	ninety-nine thousand nine hundred and ninety-nine
transmission ratio	1:1
Counting speed	�� 250 times/minute
Pull angle	Maximum pull angle 37o, minimum pull angle 38o
torque	��8 N·cm
characteristic	Pull right, pull the lever clockwise		Pull right, pull the lever counterclockwise	Pull left, pull the lever clockwise	Pull left, pull the lever counterclockwise
weight	About 72g

Installation dimension diagram of JL055B five position pull counter:

JL055B Five Position Pull Counter

[mechanical counter]JC106 type length measuring counter

2026-6-16 20:46:49

Principle and Introduction of JC106 Length Measuring Counter:
The JC106 mechanical length counter is a counting device used to measure length. This counter uses the fixed length of two rollers to measure the length of the object being measured. Mainly used in industries such as textile, papermaking, printing and dyeing, leather making, and film production.

JC106 type length measuring counter product series and related technical parameters:

model	JC106
Display numerical specifications	Height x width, 4 mm x 2.5 mm
Maximum cumulative computing capacity	ninety-nine thousand nine hundred and ninety-nine point nine
rated speed	400r/min (roller)
Wheel rotation distance (meters)/display data	1:1

Product installation dimension diagram:

JC106 type length measuring counter

[mechanical counter]JC075 type mechanical length measuring counter

2026-6-16 20:46:41

The JC075 mechanical length counter is a counting device used to measure length. The counter uses the fixed length of two rollers to measure the length of the measured object (i.e. the roller rolls 1 meter and the counter displays 1). The counter is equipped with a zeroing device. After completing a measurement process, reset the counter to zero to proceed to the next measurement process. This counter is mainly used in industries such as textile, papermaking, printing and dyeing, leather making, and film.

JC075 Mechanical Length Measuring Counter Series and Related Technical Parameters:

model	JC075
Display numerical specifications	Height x width, 6.5 mm x 4.5 mm
Operating Temperature	-10�桫+50��
Maximum cumulative computing capacity	ninety-nine thousand nine hundred and ninety-nine
Wheel rotation distance (meters)/display data	1:1
rated speed	500r/min
rated speed	500r/mm (roller)

Installation dimension diagram of JC075 mechanical length counter:

JC075 Mechanical Length Measuring Counter

[mechanical counter]J250 type five position mechanical preset counter

2026-6-16 20:46:32

Working principle and introduction:

The J250 series five position mechanical preset counter is mainly divided into two categories: rotation and pulling, and is suitable for controlling the rotation or stroke of machines or instruments. Press the button on the left side of the counter to input the desired value into the counter by sequentially pressing the other five buttons. Release the button on the left, and the counter will display the value you have selected. (Among them, with preset settings, when the counter number displays "00000", the counter sends a signal to control the machine or instrument to stop working).
The J250 series five digit mechanical preset counter is widely used in the printing, textile, printing and dyeing, knitting, cable, telecommunications, military, light industry, and machinery industries. It can be used alone or in conjunction with testing instruments and modern control equipment to achieve quantitative control functions.

Technical parameters of J250 five position mechanical preset counter:

model	transmission ratio	Display numerical specifications (height x width)	Maximum cumulative computing capacity	Speed (r/min)	Torque (N · cm)	Working temperature (��)	rotation direction	Load of output signal
J250 001	1:1	6.5 mm×5.6 mm	ninety-nine thousand nine hundred and ninety-nine	��3000	��1.8	-10��+50	Parallel axis counterclockwise rotation	Maximum voltage 250V, maximum current 2A, power<50W
J250 002	1:1			��3000			Parallel axis clockwise rotation
J250 011	1:10			��300			Parallel axis counterclockwise rotation
J250 012	1:10			��300			Parallel axis clockwise rotation
J250 021	1:5						Parallel axis counterclockwise rotation
J250 022	1:5						Parallel axis clockwise rotation
J250 031	1.6:1						Parallel axis clockwise rotation
J250 041	5:1						Parallel axis clockwise rotation
J250 042	5:1						Parallel axis clockwise rotation
J250 101	1:1			��1500	��3		Vertical axis counterclockwise rotation
J250 102	1:1			��1500	��3		Rotate the vertical axis clockwise
J250 301	1:1			��240	��10		Pull counterclockwise parallel to the axis
J250 302	1:1			��240	��10		Pull clockwise parallel to the axis
Can be designed and produced according to customer needs

Installation dimension diagram of J250 five position mechanical preset counter:

J250 type five position mechanical preset counter

[mechanical counter]J116 series six digit mechanical counter

2026-6-16 20:46:23

Working principle and introduction:
The J116 series six bit counter is a mechanical rotary counter. Drive the drive shaft and use the internal gear mechanism to drive the counting wheel for decimal addition counting. The drive shaft rotates counterclockwise once, and the count values accumulate by 1, 2, 5, and 10. Press the reset button on the left to instantly reset the number on the counting wheel to zero. The J116 series six digit counter can be used to measure the rotational speed of various machinery, as well as to measure length, depth, flow rate, etc., and is therefore widely used in industries such as machinery, wire production, tape production, and printing. It is an essential tool for measurement and recording.

Product series and related technical parameters:

model	J116-001	J116-002	J116-004
Display numerical specifications	Height x Width 4 mm x 2.5 mm
Operating Temperature	-10�桫+50��
Maximum cumulative computing capacity	nine hundred and ninety-nine thousand nine hundred and ninety-nine
transmission ratio	1:1	1:2	1:5
rated speed	��1000r/min	��500r/min	��500r/min
torque	��3N·cm
weight	About 70g
Can be designed and produced according to customer needs

Product installation dimension diagram:

J116 series six digit mechanical counter

[mechanical counter]J115-001 Textile Machinery Counter

2026-6-16 20:46:14

Working principle and introduction:
The J115 textile machinery counter uses four sets of counting wheels for digital display and is controlled by a shift adjustment knob. When the shift adjustment knob displays "A", the input shaft rotates and the A group counting wheel counts. If the adjustment knobs are set to B, C, and D respectively, the set of counting wheels that indicates the same number of revolutions as the adjustment knob will display the input shaft's rotation speed. This counter can only perform cumulative counting and does not have a reset mechanism. It can be used to record the output of different shifts on a machine.
Mainly used on weaving machines, ribbon machines, and other machines in the textile industry that implement multi shift systems.

Product series and related technical parameters:

model	J115-001
Display numerical specifications	Height x Width 6.5 mm x 3.8 mm
Operating Temperature	-10�桫+50��
Maximum cumulative computing capacity	ninety-nine thousand nine hundred and ninety-nine point nine
Input shaft speed/digital display	12.5��1
rated speed	��1200r/min
torque	��1.5 N·cm
shift	four
Can be designed and produced according to customer needs

Product installation dimension diagram:

J115-001 Textile Machinery Counter

[mechanical counter]J114 Type Five Bit Pull Counter

2026-6-16 20:46:05

The J114 counter is used to accumulate and record the number of back and forth movements of instruments or machinery. Connect the input shaft pull arm of the counter to the instrument or machine to perform pull counting. Digital direct reading display with a rotating zero return device. After returning to zero, it is still possible to start accumulating counting from zero. The J114 counter is mainly used in industries such as textiles, machinery, circuit breakers, and mining.

Technical parameters of J114 five position pull counter:

model	J114	J114A	J114B	J114C	J114Z	J114N
Display numerical specifications	Height x Width 4.4 mm x 3 mm
Operating Temperature	-10�桫+50��
Maximum cumulative computing capacity	ninety-nine thousand nine hundred and ninety-nine
transmission ratio	1:1
Counting speed	�� 500 times/minute
Pull angle	Maximum pull angle 43o, minimum pull angle 38o
torque	��8 N·cm
characteristic	The installation hole is diameter 3.4 mm	The installation hole is diameter 4.5 mm	Unilateral installation	No return to zero	Zuo La	Pull the lever counterclockwise (right pull)
weight	About 80g		About 70g	About 75g	About 80g
Can be designed and produced according to customer needs

Product installation dimension diagram:

J114 Type Five Position Pull Counter

[mechanical counter]JS-A-2 Pull type mechanical counter

2026-6-16 20:45:57

JS5-A Pull type Mechanical Counter Main Technical Parameters:
Counting range: 0-9999
Arm working angle: 0 ° C-50 ° C

[mechanical counter]JS5 Pull type mechanical counter

2026-6-16 20:45:49

JS5-A Pull type Mechanical Counter Main Technical Parameters:
Counting range: 0-9999
Arm working angle: 0 ° C-50 ° C

JS5-A-1:

[mechanical counter]D67-F Automatic carry up counter

2026-6-16 20:45:41

The D67-F automatic carry up counter is a mechanically driven automatic carry up counter suitable for counting applications in general punching machines, printing machines, and other machinery.
Count range: 0-99999.
Pull the lever once to jump one number, and it will automatically carry forward.
Rotate the character axis in the forward direction, and all numbers will return to zero.
The internal gear train of this device is made of special plastic, and should not come into contact with toluene, thinner, etc. during disassembly and cleaning. Just add a little engine oil.

Counting range	000001-999999
Counting speed	�� 350 times/minute
Inspection location	Top surface
transmission ratio	1:1
Return-to-zero method	rotary
Overall dimensions	38*30mm

D67-F automatic carry up counter

[mechanical counter]D94-S type small six digit pull counter

2026-6-16 20:45:32

The D94-S small six digit pull counter is designed based on the D67-F pull counter, which has the advantages of beautiful appearance and large counting range.
This device is a mechanical driven automatic carry up counter, mainly used for counting applications in general punching machines, printing machines, and other operations.
The pull rod bounces one number every time it is pulled, and it automatically moves forward. The angle of the pull rod can be adjusted arbitrarily.
The counting range of this device is 0-999999.

The D94-S small six digit pull counter should be lightly oiled frequently during use.

[mechanical counter]75- Type II Counter

2026-6-16 20:45:24

The 75-II type counter is a mechanical pull automatic carry up counter, suitable for counting mechanical operations such as general machine tools and various presses.
The counting range of this device is 0-9999.
The angle of the pull rod can be adjusted arbitrarily. Every time you pull it, it bounces one number. When it reaches ten, it returns to zero. The number on the press handle returns to zero.
This device can withstand large vibrations without affecting counting accuracy.
When installing the 75-II type counter, it must be parallel to the workbench and maintain the concentricity and perpendicularity of the counter, otherwise it will affect the correct counting or normal rotation. When using, the pull rod must be pulled to the right foot, but not too far.
The maximum speed of this device is 200 times per minute. If it is too fast, it will damage the internal components.
The internal wheels and gears of the 75-II counter are made of special engineering plastic and should not come into contact with high temperatures or flammable gases. Simply add engine oil when using.

[mechanical counter]D-70 type counter

2026-6-16 20:45:15

The D-70 counter is a mechanical pull automatic carry up counter. Suitable for counting mechanical operations such as general machine tools and various presses.
Count range: 0-99999.
The angle of the pull rod can be adjusted arbitrarily.
Every time you pull, it jumps one number, every decimal. Press the zero button to reset all the numbers to zero. Can withstand large vibrations without affecting counting accuracy.
This device must be installed parallel to the workbench. Keep the concentricity of the counter perpendicular, otherwise it will affect the correct counting or normal rotation.
When using a pull rod, it must be pulled to the right foot, but not too far.
The maximum speed of the D-70 counter is 200 beats per minute, and if it is too fast, it will damage the internal components.
The internal wheels and gears of the D-70 counter are made of special engineering plastics and should not come into contact with high temperatures or flammable gases. Simply add engine oil when using.

[mechanical counter]JS-5 series mechanical counter JS-5-F JS-5-E JS-5-D JS-5-C JS-5-B JS-5-A JS-5

2026-6-16 20:45:06

The JS-5 series mechanical counter is specifically designed for use with vacuum circuit breakers. Absorbing the advantages of similar foreign products and having its own unique design, it has received praise in the use of some domestic vacuum circuit breaker manufacturers.

Technical features: The counter cannot return to zero halfway, and can rotate clockwise or counterclockwise.
Counting range: 0~99999

[mechanical counter]75-I type rotary length measuring counter

2026-6-16 20:44:58

The 75-I tachometer is a recorder used for measuring length and various machine rotations, generally suitable for mining drilling depth. It measures and records the length of the cable and the number of coils wound.
This table is a five digit number, with the rotation direction of the shaft being clockwise and counterclockwise, clockwise rotation being increasing, and counterclockwise rotation being decreasing. The highest recorded number is 99999.
The first digit to be rotated is 1/10 of the rotation axis, and the axis can automatically carry after one rotation.

The 75-I rotary length counter is equipped with a reset mechanism. If a certain number of records are recorded, the push handle can be reset to zero, and then the second stage of recording can be made.
Attention should be paid to balance when installing this table, and it should be concentric with the host when in contact, otherwise it may cause the rotation to twist or break, resulting in inaccurate counting or malfunction.
The maximum speed of this table is 350 times per minute. If it is too fast, it may cause damage to the components.
When resetting to zero, the leading digit must be turned within the range of the window cover and cannot be reset during rotation.
The wheel and gear of the 75-I rotary length measuring counter are made of special engineering plastics and should not come into contact with high-temperature flammable gases. The bearing must be regularly oiled.