Shanghai Huabang Industrial Business Network - Counter | timer

[Electromagnetic counter]875 electromagnetic counter (five digits)

2026-6-17 21:50:17

Working principle and purpose

The 875 five digit electromagnetic counter is used to record the accumulation of electrical signal frequency and has a reset device. Mainly used for statistical counting, currency counting machine counting, machine tool travel counting, flow counting, quantity counting, etc.

Main technical specifications of 875 (JJ-875) electromagnetic counter (five digits):

Display numerical specifications	Height X width, mm��4X 2
Maximum cumulative computing capacity	nine hundred and ninety-nine thousand nine hundred and ninety-nine
Voltage type	DCl2��220V�� AC24V��220V
Counting speed	ACl0 times/second; DC20 times/second
power consumption	AC2��5VA��DCl��5W
Environmental temperature for use	10 �� -150 ��
relative humidity	85%
weight	About 80G

Installation dimensions of 875 (JJ-875) electromagnetic counter (five digits):

875 (JJ-875) electromagnetic counter (five digits)

[Electromagnetic counter]408 type eight bit electromagnetic counter

2026-6-17 21:49:03

The 408 type eight bit electromagnetic counter is a device that uses electric pulses to drive counting elements through electromagnetic components for counting. Used to record the accumulation of electrical signal frequency, it can be used for uninterrupted counting work without returning to zero, with a maximum counting frequency of up to one billion times. Such as statistical counting, mechanical rotation, currency counting, flow counting, group selection counting, etc., are widely used in industries such as printing, textile, printing and dyeing, machinery, high-voltage switches, and high-voltage switchgear.

model	four hundred and eight
Display numerical specifications opening size	Height x Width: 4 mm x 1.8 mm 55 mm×29.5mm
Operating Temperature	-10�桫+50��
relative humidity	��85%
Maximum cumulative computing capacity	ninety-nine million nine hundred and ninety-nine thousand nine hundred and ninety-nine
working voltage	DC: 12V~220V various specifications and models; AC: 24V~240V Various specifications and models
Counting speed	AC: �� 10 times/second; DC: �� 20 times/second
power	AC:4.0VA; DC:2.75W
Can be designed and produced according to customer needs

408 type eight digit electromagnetic counter

[Electromagnetic counter]SYS-1 type electromagnetic counter

2026-6-17 21:41:38

SYS-1 electromagnetic counter

[Electromagnetic counter]JDM7-52M Electromagnetic counter

2026-6-17 21:41:30

JDM7-52M Electromagnetic Counter

[Electromagnetic counter]JDM6 series electromagnetic counter

2026-6-17 21:41:22

JDM6 series electromagnetic counter

JDM6-51S
JDM6-52M

[Electromagnetic counter]JDM5-62X Electromagnetic counter

2026-6-17 21:41:13

JDM5-62X Electromagnetic Counter

[Electromagnetic counter]E-16u series electromagnetic counter

2026-6-17 21:41:05

E-16u series four, five, and six digit electromagnetic counters are used to record the cumulative number of electrical pulse signals.

The E-16u series electromagnetic counter can be combined with secondary instruments to form a digital display instrument. Widely used in various industries such as petroleum, chemical, textile, machinery, mining, national defense, agriculture, food, printing, etc. for various electric pulse counting. After the electrical signal is input into the counter, a suction force is generated in the electromagnet, which drives the armature to drive the escapement mechanism and drives the digital wheel to rotate for decimal counting.

[Electromagnetic counter]MCU-7Y series electromagnetic counter

2026-6-17 21:40:56

The MCU-7Y series electromagnetic counter is used to record the cumulative number of electrical pulse signals. Can be combined with secondary instruments to form a digital display instrument. The MCU-7Y series electromagnetic counter is widely used for various electric pulse counting in industries such as petroleum, chemical, textile, machinery, mining, national defense, agriculture, food, printing, etc. After the electrical signal is input into the counter, a suction force is generated in the electromagnet, which drives the armature to drive the escapement mechanism and drives the digital wheel to rotate for decimal counting.

[Electromagnetic counter]MCF series electromagnetic counter

2026-6-17 21:40:47

MCF Series: Electromagnetic Counter

Specifications MCF-4X AC220V��MCF-4X AC110V��MCF-4X DC24V��MCF-6X AC220V��MCF-6X Ac110��MCF-6 DC24V
Electricity consumption: AC3-4VA DC2-3W
Counting method: 1 signal counting 1 (jump 1/2 when powered on, jump 1/2 when powered off)
Maximum counting speed: 10Hz (10CPS0)
Reset method: manual zeroing, button type
Weight: 4 x: 100G, 6 x: 120G

[Electromagnetic counter]404C type six bit electromagnetic counter

2026-6-17 21:40:29

The 404C six digit electromagnetic counter is used to record the accumulation of electrical signal frequency and has a reset device. It can be used for counting work that intermittently returns to zero, such as statistical counting, mechanical rotation, currency counting, flow counting, group selection counting, etc. It is widely used in industries such as printing, textile, printing and dyeing, machinery, high-voltage switches, and high-voltage switchgear.

model	404C
Display numerical specifications and opening size	Height x Width: 4 mm x 1.8 mm 55mm x 29.5mm
Operating Temperature	-10�桫+50��
relative humidity	��85%
Maximum cumulative computing capacity	nine hundred and ninety-nine thousand nine hundred and ninety-nine
working voltage	DC: 12V~220V various specifications and models; AC: 24V~240V Various specifications and models
Counting speed	AC: �� 10 times/second; DC: �� 25 times/second
power	AC:4.0VA; DC:2.75W
Can be designed and produced according to customer needs

404C type six digit electromagnetic counter

[Electromagnetic counter]OD-06 type electromagnetic counter

2026-6-17 21:40:21

Counting range	000000-999999
Voltage type	12V��24V
Voltage fluctuation range	±10%
Counting speed	DC20 times/second, AC10 times/second
indication error	<1X0.00001
Environmental temperature for use	-20 �� -50 �� Relative temperature: �� 85%
power	0.5W
Return to zero method	No return to zero

OD-06 electromagnetic counter

[Electromagnetic counter]LFC-6S Electromagnetic counter

2026-6-17 21:40:12

Counting range	0��99999��0��999999
Counting speed	DC15 times/second, AC10 times/second
Voltage type	DC: DC6V-220V, AC: AC24V-220V
power	DC��3.5W��AC��3W
Return to zero method	Press back to zero

LFC-6S Electromagnetic Counter

[Electromagnetic counter]LFC-5S Electromagnetic counter

2026-6-17 21:40:04

Counting range	0��99999��0��999999
Counting speed	DC15 times/second, AC10 times/second
Voltage type	DC: DC6V-220V, AC: AC24V-220V
power	DC��3.5W��AC��3W
Return to zero method	Press back to zero

LFC-5S electromagnetic counter

[Electromagnetic counter]CSK6-YKW Electromagnetic counter

2026-6-17 21:39:55

Counting range	0-999999
Voltage type	DC24V��AC220V
Voltage fluctuation range	±10%
Counting speed	DC20 times/second, AC10 times/second
indication error	<1X0.00001
Environmental temperature for use	-20 �� -50 �� Relative temperature: �� 85%
power	DC1.5W��AC2.5VA
Return to zero method	Press back to zero (with lock)
Installation method	Panel style

CSK6-YKW electromagnetic counter

[Electromagnetic counter]CSK6-NKW Electromagnetic counter

2026-6-17 21:39:47

CSK6-NKW electromagnetic counter

Model	CSK6-NKW
Counting digits	Four, five, six, seven
voltage specification	DC6V��DC12V��DC18V��DC24V��DC36V��DC48V��DC110V��DC220V��AC24V��AC36V��AC48V��AC110V��AC220V
tolerance	Rated voltage -15% to+10%
power	DC��3.5W��AC��3W
Counting speed	DC: 20 times/second, AC: 10 times/second
lifespan	200000000 times
lead length	According to customer requirements

CSK6-NKW electromagnetic counter

[Electromagnetic counter]CSK5-YKW Electromagnetic counter

2026-6-17 21:39:35

Counting range	0-99999
Voltage type	DC9V��DC12V��DC24V��DC110V��DC220V / AC9V��AC12V��AC24V��AC110V��AC220V
Voltage fluctuation range	±10%
Counting speed	DC20 times/second, AC10 times/second
indication error	<1X0.00001
Environmental temperature for use	-20 �� -50 �� Relative temperature: �� 85%
power	DC1.5W��AC2.5VA
Return to zero method	Press back to zero (with lock)
Installation method	Panel style

CSK5-YKW electromagnetic counter

[Electromagnetic counter]CSK5-NWW Electromagnetic counter

2026-6-17 21:39:26

CSK5-NWW electromagnetic counter

Counting range	0-99999
Voltage type	DC24V AC220V
Voltage fluctuation range	±10%
Counting speed	DC20 times/second, AC10 times/second
indication error	<1X0.00001
Environmental temperature for use	-20 �� -50 �� Relative temperature: �� 85%
power	DC1.5W��AC2.5VA
Return to zero method	Press back to zero (with lock)
Installation method	Panel style

CSK5-NWW electromagnetic counter

[Electromagnetic counter]876B type five digit electromagnetic counter

2026-6-17 21:39:17

Working principle and introduction of 876B five position electromagnetic counter:
The 876B five digit electromagnetic counter is used to record the accumulation of the number of electrical signals, without bringing back a zero device. Mainly used in photocopiers, it is also widely used in various industries such as petroleum, chemical, textile, machinery, mining, national defense, food, printing, etc. It can be combined with other instruments to form digital display instruments.

Technical parameters:

model	876B
Display numerical specifications (height x width)	4 mm×1.9 mm
Operating Temperature	-10�桫+50��
relative humidity	��85%
Maximum cumulative computing capacity	ninety-nine thousand nine hundred and ninety-nine
Working voltage (fluctuation range: ± 10%)	DC: Various specifications and models ranging from 5V to 220V; AC: 24V~240V Various specifications and models
Counting speed	AC: �� 10 times/second; DC: �� 20 times/second
power	AC:2.5VA; DC:1.5W
size	75mm×41.5mm×31mm
Can be designed and produced according to customer needs

876B type five digit electromagnetic counter

[Electromagnetic counter]JJ-422 type electromagnetic counter

2026-6-17 21:39:09

JJ-422 electromagnetic counter

[Electromagnetic counter]JJ-MCF-2X type electromagnetic counter

2026-6-17 21:39:00

JJ-MF-2X Electromagnetic Counter

[Electromagnetic counter]JJ-LFC-6 type electromagnetic counter

2026-6-17 21:38:52

JJ-LFC-6 electromagnetic counter

[Electromagnetic counter]JJ-LFC-5 type electromagnetic counter

2026-6-17 21:38:41

JJ-LFC-5 Electromagnetic Counter

[Electromagnetic counter]JJ-CSK4-KW type electromagnetic counter

2026-6-17 21:38:33

JJ-CSK4-KW type electromagnetic counter

[Electromagnetic counter]JJ-30B type electromagnetic counter

2026-6-17 21:38:24

JJ-30B electromagnetic counter

[Electromagnetic counter]JJ-30A (TD6-IIIA) Type III A Electromagnetic Counter

2026-6-17 21:38:16

JJ-30A type (TD6-IIIA type) electromagnetic counter

[Electromagnetic counter]JJ-20C type electromagnetic counter

2026-6-17 21:38:07

JJ-20C electromagnetic counter

[Electromagnetic counter]JJ-20B type electromagnetic counter

2026-6-17 21:37:58

JJ-20B electromagnetic counter

[Electromagnetic counter]JJ-20A type electromagnetic counter

2026-6-17 21:37:49

JJ-20A Electromagnetic Counter

[Electromagnetic counter]JJ-10B type electromagnetic counter

2026-6-17 21:37:40

JJ-10B electromagnetic counter

[Electromagnetic counter]JDM-II type electromagnetic counter

2026-6-17 21:37:32

JDM-II type electromagnetic counter

[Electromagnetic counter]ZDS-001 type combination timer counter

2026-6-17 21:37:22

Working principle and introduction:
The ZDS-001 combination timer counter consists of a timer and an electromagnetic counter. Mainly used in the elevator industry to record the running time and opening times of elevators. This can provide a basis for the normal maintenance of elevators and facilitate their safe operation. This product can also be applied to the machine tool industry or other industries that require counting and timing. The power supply for the counter and timer can be selected as AC or DC. When a pulse signal is sent to the counter, it counts and the timer accumulates time after being powered on. The minimum timing potential of the timer is 0.01 hours (36 seconds).

Technical parameters of ZDS-001 combination timer counter:

	counter	timer
Display numerical specifications	Height * width, mm��4*2	Height * width, mm��4*1.8
Maximum cumulative computing capacity	nine hundred and ninety-nine thousand nine hundred and ninety-nine	99999.99 hours
Rated voltage specifications	DC12V�� DC24V�� AC220V�� AC110V	DC24V�� AC220V��50Hz��60Hz��
Voltage fluctuation range	±10%	±10%
Maximum counting frequency	AC: 10 times/second DC: 25 times/second
Pulse duty cycle	1��1
power consumption	AC��4VA�� DC��2.75W	0.5W
Environmental temperature for use	-10�桪+50��
Environmental humidity for use	��85%
quality	210 grams

ZDS-001 Combination Timing Counter

[Electromagnetic counter]ZDL series combination ammeter counter

2026-6-17 21:37:13

The ZDL series combination ammeter counter is a type of counter used on lightning arrester monitors in the power sector. When the monitor is struck by lightning, it instantly charges the lightning arrester circuit, which immediately enters a short-circuit state and forms another circuit with the charging capacitor as the power source and the combination counter as the device. After the charging capacitor is discharged, the ammeter starts working. When the ammeter current reaches a certain value, the counter starts counting and is used to measure the number of lightning strikes on the lightning arrester. This combination counter can adjust the technical parameters of the counter and current according to the user's needs.

Product series and related technical parameters:

model	ZDL 001	ZDL 002	ZDL 003	ZDL 004	ZDL 005	ZDL 006	ZDL 007	ZDL 008
Display numerical specifications (height x width)	4.8 mm×3.7 mm						4 mm×1.9 mm	4.8 mm×3.7 mm
Operating Temperature	-10�桫+50��
relative humidity	��85%
Maximum cumulative computing capacity	nine hundred and ninety-nine						ninety-nine thousand nine hundred and ninety-nine	nine hundred and ninety-nine
Working voltage (fluctuation range: ± 10%)	DC:48V		DC:24V		DC:48V
power	DC:1.5W
Can be designed and produced according to customer needs

Product installation dimension diagram:

ZDL series combination ammeter counter

[Electromagnetic counter]DL517 type electromagnetic counter

2026-6-17 21:37:04

Product Name: DL517 Electromagnetic Counter
Working principle and introduction: The DL517 electromagnetic counter relies on external electrical signals to drive the electromagnet in the counter, and the counting mechanism inside the counter is driven by the armature to accumulate and count.
Mainly used in various industries such as copiers, switches, petroleum, chemical, textile, machinery, mining, national defense, food, printing, etc., it can be combined with other instruments to form digital display instruments.

Technical parameters of DL517 electromagnetic counter:

Display numerical specifications	Width x Height: 1.4 mm x 2.2 mm
Maximum cumulative computing capacity	nine million nine hundred and ninety-nine thousand nine hundred and ninety-nine
Maximum counting frequency	15 times/second
power supply	DC ��12V; DC ��24V
Minimum pulse duration/interruption time	33ms/33ms
power	0.9W
Operating Temperature	-15 ��~+60 ��, relative humidity not exceeding 85%

The appearance and installation dimensions of DL517 electromagnetic counter (two types of appearance and installation dimensions) are shown in the following figure

DL517 electromagnetic counter

[Electromagnetic counter]DL013 type three digit electromagnetic counter

2026-6-17 21:36:56

Product Name: DL013 Three Position Electromagnetic Counter

Working principle and introduction:
The DL013 three position electromagnetic counter relies on external electrical signals to drive the electromagnet in the counter, and the counting mechanism inside the counter is driven by the armature to perform cumulative counting. This counter is mainly used in lightning arrester leakage current and action recorders or other high-voltage electrical equipment.

Technical parameters of DL013 three digit electromagnetic counter:

model	DL013
Display numerical specifications (height x width)	4.8 mm×3.7 mm
Operating Temperature	-10�桫+50��
relative humidity	��85%
Maximum cumulative computing capacity	nine hundred and ninety-nine
Working voltage (fluctuation range: ± 10%)	DC: 12V~220V Various specifications and models
Counting speed	DC: �� 10 times/second
power	DC:1.5W
Can be designed and produced according to customer needs

Installation dimension diagram of DL013 three position electromagnetic counter:

DL013 Three Position Electromagnetic Counter

[Electromagnetic counter]876-I (II, III) type six bit electromagnetic counter

2026-6-17 21:36:46

Product Name: 876-I (II, III) Type Six Position Electromagnetic Counter

Working principle and introduction:

876-I (II, III) type six digit electromagnetic counter is used to record the accumulation of electrical signal frequency without bringing back the zero device. Mainly used in photocopiers, it is also widely used in various industries such as petroleum, chemical, textile, machinery, mining, national defense, food, printing, etc. It can be combined with other instruments to form digital display instruments.

Product series and related technical parameters:

Display numerical specifications	Height * Width mm 4 * 2
Maximum cumulative computing capacity	nine hundred and ninety-nine thousand nine hundred and ninety-nine
rated voltage	DC24V�� DC12V�� DC6V
Counting speed	10 times/second
power	3W
Environmental temperature for use	-10��~+50��
relative humidity	<85%
quality	About 70 grams

Product installation dimension diagram:

876-I (II, III) type six digit electromagnetic counter

[Electromagnetic counter]869 type electromagnetic counter

2026-6-17 21:36:38

Product Name: 869 Electromagnetic Counter

Working principle and introduction:

The 869 electromagnetic counter can achieve cumulative counting of electrical pulse signals without bringing back a zero device, and is widely used in industries such as machinery, electrical, and printing. There are three specifications for the number of digits in a counter: six digits, seven digits, and eight digits.

Product series and related technical parameters:

Display numerical specifications	Height * width, mm4*2
rated voltage	DC24V
power	1.7W
Ripple coefficient	<48%
Power on duration rate (25 ��)	100%
Counting speed	20 times/second
Environmental temperature for use	-10�桪+50��
relative humidity	<85%
quality	80g

Installation dimension diagram of 869 electromagnetic counter:

869 type electromagnetic counter

[Electromagnetic counter]422 type six position electromagnetic preset counter

2026-6-17 21:36:30

Working principle and introduction:
The 422 type six position electromagnetic preset counter emits a signal when the counter reaches the preset number, which can be used for automatic control operations. For example, it is widely used in industries such as printing, textile, printing and dyeing, machinery, etc., such as turning on and off machines, pre selecting the number of pieces, and indicating the workload.

Technical parameters of 422 type six position electromagnetic preset counter:

model	four hundred and twenty-two
Display numerical specifications (height x width)	Pre selection: 3.4 mm × 1.5 mm; Counting: 4 mm × 1.8 mm;
Operating Temperature	-10�桫+50��
relative humidity	��85%
Maximum cumulative computing capacity	nine hundred and ninety-nine thousand nine hundred and ninety-nine
Working voltage (fluctuation range: ± 10%)	DC: 12V~220V various specifications and models; AC: 24V~240V Various specifications and models
Counting speed	AC: �� 10 times/second; DC: �� 25 times/second
power	AC:4.0VA; DC:3.75W
Can be designed and produced according to customer needs

Installation dimension diagram of 422 type six position electromagnetic preset counter:

422 type six position electromagnetic preset counter

[Electromagnetic counter]LFC series electromagnetic counter LFC-6S LFC-6 LFC-5S LFC-5

2026-6-17 21:36:20

LFC series electromagnetic counter

[Electromagnetic counter]CSK4 series electromagnetic counter

2026-6-17 21:36:12

CSK4 series electromagnetic counter

[Electromagnetic counter]JJ-10A type electromagnetic counter

2026-6-17 21:36:03

Working principle and purpose:

JJ-10A electromagnetic counter is used to record the cumulative number of electrical pulse signals. It can be used as a digital display instrument in secondary instruments and is widely used for various electrical pulse counting in industries such as petroleum, chemical, textile, machinery, mining, national defense, agriculture, food, printing, etc. After the electrical signal is input into the counter, a suction force is generated in the electromagnet, which drives the armature to drive the escapement mechanism and drives the digital wheel to rotate for decimal counting.

JJ-10A electromagnetic counter

[Electromagnetic counter]877 type electromagnetic counter

2026-6-17 21:35:53

Working principle and purpose:

The 877 electromagnetic counter is used to record the cumulative number of electrical pulse signals. It can be used as a digital display instrument in secondary instruments and is widely used for various electrical pulse counting in industries such as petroleum, chemical, textile, machinery, mining, national defense, agriculture, food, printing, etc. After the electrical signal is input into the counter, a suction force is generated in the electromagnet, which drives the armature to drive the escapement mechanism and drives the digital wheel to rotate for decimal counting.

model	eight hundred and seventy-seven	877-��A
Display numerical specifications (height x width)	4 mm×1.8 mm	4 mm×1.8 mm
Operating Temperature	-10�桫+50��
relative humidity	��85%
Maximum cumulative computing capacity	nine million nine hundred and ninety-nine thousand nine hundred and ninety-nine	nine million nine hundred and ninety-nine thousand nine hundred and ninety-nine
Working voltage (fluctuation range: ± 10%)	DC: Various specifications and models ranging from 5V to 220V; AC: 24V~240V Various specifications and models
Counting speed	AC: �� 10 times/second; DC: �� 20 times/second	AC: �� 5 times/second; DC: �� 10 times/second
power	AC:2.5VA; DC:1.5W	AC:4VA; DC:3W
size	75mm×41.5mm×31mm	56.5mm×40.2mm×24.5mm
Can be designed and produced according to customer needs

Installation dimension diagram:

877 type electromagnetic counter

[Electromagnetic counter]873(JJ-873) type electromagnetic counter

2026-6-17 21:35:45

Working principle and purpose:
The 873 (JJ-873) electromagnetic counter is used to record the cumulative number of electrical pulse signals. It can be combined with secondary instruments to form a digital display instrument, widely used for various electrical pulse counting in industries such as petroleum, chemical, textile, machinery, mining, national defense, agriculture, food, printing, etc. After the electrical signal is input into the counter, a suction force is generated in the electromagnet, causing the armature to drive the escapement mechanism and drive the digits to rotate for decimal counting.

873 (JJ-873) electromagnetic counter

[Electromagnetic counter]872(JJ-872) type electromagnetic counter

2026-6-17 21:35:37

Working principle and purpose:

The 872 (JJ-872) electromagnetic counter is used to record the cumulative number of electrical pulse signals. It can be combined with secondary instruments to form a digital display instrument, widely used for various electrical pulse counting in industries such as petroleum, chemical, textile, machinery, mining, national defense, agriculture, food, printing, etc. After the electrical signal is input into the counter, a suction force is generated in the electromagnet, causing the armature to drive the escapement mechanism and drive the digits to rotate for decimal counting.

872 (JJ-872) electromagnetic counter

[Electromagnetic counter]MCF series electromagnetic counter MCF-4X��MCF-6X

2026-6-17 21:35:27

MCF series electromagnetic counter

Specifications MCF-4X AC220V��MCF-4X AC110V��MCF-4X DC24V��MCF-6X AC220V��MCF-6X Ac110��MCF-6 DC24V
Electricity consumption: AC3-4VA DC2-3W
Counting method: 1 signal counting 1 (jump 1/2 when powered on, jump 1/2 when powered off)
Maximum counting speed: 10Hz (10CPS0)
Reset method: manual zeroing, button type
Weight: 4 x: 100G, 6 x: 120G

[Electromagnetic counter]JD6- Type III A Six bit Electromagnetic Counter

2026-6-17 21:35:19

Working principle and introduction:

JD6IIIA type six digit electromagnetic counter is used to record the cumulative number of telecommunication times, and can be pressed back to zero. It can be combined with secondary instruments to form a digital instrument. Widely used in industries such as petrochemicals, textiles, machinery, food, and printing for electric pulse counting.

Technical parameters of JD6-IIIA type six digit electromagnetic counter:

model	JD6- ��A
Display numerical specifications (height x width)	4 mm×1.8 mm
Operating Temperature	-10�桫+50��
relative humidity	��85%
Maximum cumulative computing capacity	nine hundred and ninety-nine thousand nine hundred and ninety-nine
Working voltage (fluctuation range: ± 10%)	DC: 12V~220V various specifications and models; AC: 24V~240V Various specifications and models
Counting speed	DC: �� 20 times/second; AC: �� 10 times/second
power	AC:4.0VA; DC:2.75W
Can be designed and produced according to customer needs

Installation dimension diagram of JD6-IIIA type six position electromagnetic counter:

JD6-IIIA type six digit electromagnetic counter

[Electromagnetic counter]JJ-30 type electromagnetic counter

2026-6-17 21:35:10

Working principle and purpose:
JJ-30 electromagnetic counter is used to record the cumulative number of electric pulse signals. It can be used as a digital display instrument in secondary instruments and is widely used for various electrical pulse counting in industries such as petroleum, chemical, textile, machinery, mining, national defense, agriculture, food, printing, etc. After the electrical signal is input into the counter, a suction force is generated in the electromagnet, which drives the armature to drive the escapement mechanism and drives the digital wheel to rotate for decimal counting.

[Electromagnetic counter]874 type electromagnetic counter

2026-6-17 21:35:02

Working principle and purpose:

The 874 electromagnetic counter is used to record the cumulative number of electrical pulse signals. It can be combined with secondary instruments to form a digital display instrument, widely used for various electrical pulse counting in industries such as petroleum, chemical, textile, machinery, mining, national defense, agriculture, food, printing, etc. After the electrical signal is input into the counter, a suction force is generated in the electromagnet, causing the armature to drive the escapement mechanism and drive the digits to rotate for decimal counting.

[Electromagnetic counter]JJ404, JJ404W series electromagnetic counter

2026-6-17 21:34:53

JJ404, JJ404W series electromagnetic counter

[Electromagnetic counter]JJ-633-3 type electromagnetic counter

2026-6-17 21:34:45

JJ-633-3 Electromagnetic Counter

[Electromagnetic counter]Electromagnetic counter

2026-6-17 21:34:36

JJ-633-2 Electromagnetic Counter

[Electromagnetic counter]876(JJ-876) type six bit electromagnetic counter

2026-6-17 21:34:28

Working principle and purpose
The 876 type six digit electromagnetic counter is used to record the accumulation of electrical signal counts without bringing back a zero device. Mainly used for copiers, it is also widely used in various industries such as petroleum, chemical, textile, machinery, mining, national defense, food, printing, etc. It can be combined with other instruments to form a digital display instrument.

Main technical specifications of 876 (JJ-876) six position electromagnetic counter

Display numerical specifications	Height X width, mm��4X 2
Maximum cumulative computing capacity	nine thousand nine hundred and ninety-nine
Voltage type	DCl2��220V�� AC24V��220V
Counting speed	ACl0 times/second; DC20 times/second
power consumption	AC2��5VA��DCl��5W
Environmental temperature for use	10 �� -150 ��
relative humidity	85%
weight	About 70G

Installation size:

876 (JJ-876) type six position electromagnetic counter

[Electromagnetic counter]JDM013 type three digit electromagnetic counter

2026-6-17 21:34:11

Working principle and purpose

The JDM013 three position electromagnetic counter relies on external electrical signals to drive the electromagnet in the counter, and the counting mechanism inside the counter is driven by the armature to perform cumulative counting. This counter is mainly used in lightning arrester online current and action recorders or other high-voltage electrical equipment.

Main technical indicators:

Display numerical specifications	Height X width, mm��4X 2
Maximum cumulative computing capacity	nine thousand nine hundred and ninety-nine
Working voltage specifications	DCl2��220V�� AC24V��220V
power consumption	ACl0 times/second; DC20 times/second
Environmental temperature for use	AC2��5VA��DCl��5W
Relative humidity of the usage environment	10 �� -150 ��
weight	About 80G

Installation size:

JDM013 Three Position Electromagnetic Counter

[Electromagnetic counter]404 type six bit electromagnetic counter

2026-6-17 21:34:02

Working principle and purpose

The 404 type six digit electromagnetic counter is used to record the accumulation of the number of electrical signals and has a reset device. It can be used for counting work that intermittently returns to zero, such as statistical counting, mechanical rotation, currency counting, flow counting, group selection counting, etc. It is widely used in industries such as printing, textile, printing and dyeing, and machinery.

Main technical specifications of 404 type six digit electromagnetic counter

Display numerical specifications	Height X width, mm��4X 1.8
Maximum cumulative computing capacity	nine hundred and ninety-nine thousand nine hundred and ninety-nine
Voltage type	DCl2��220V�� AC24V��220V
Counting speed	ACl0 times/second; DC20 times/second
power consumption	AC2��5VA��DCl��5W
Environmental temperature for use	10 �� -150 ��
relative humidity	<85%
weight	About 170G

Installation dimensions of 404 type six digit electromagnetic counter:

404 type six digit electromagnetic counter

[Programmable controller]KMM Programmable Regulator

2026-6-17 11:23:34

KMM programmable regulator is a digital regulator that distributes functions to a single circuit, and is a precision instrument with PID control function and various other auxiliary functions.

Main Technical Instructions for KMM Programmable Regulator
Input and output parts

project				specification
Input section	Analog input	Input points		five o'clock
		input voltage		1��5V d.c
		Input bias current		-Below 1 �� A
		input method		Differential input
		Maximum allowable input voltage		DC+30V maximum
	Digital input	Input points		5 points (programmable 4 points, external interlocking signal 1 point)
		input voltage		LOW 0��4V��HIGH 10��30V
		Input bias current		LOW~3mA below, HIGH10 �� A below
		Maximum allowable input voltage		DC30V maximum
Output section	analog output	voltage output	Output points	three o'clock
			output voltage	DC 1��5V
			output impedance	250��
			output method	Differential type
		current output	Output points	1 point (converting one point of voltage output into current through V/I conversion)
			output current	DC4��20mA
			output impedance	250K��
			Allowable load	600��
			output method	Negative end shared
	Digital output	Output points		4 pieces (programmable 3 points, standby state output 1 point)
		output method		Transistor output (open collector)
		Contact capacity		DC 30V�� 0.1A (resistive load)

KMM Programmable Regulator General Specifications

Basic model		Select Specification		Additional specifications			content
Basic model		I	II	I	II	III	content
KMM							Programmable controller
	two hundred and eleven						Mask type automatic/manual/cascade SP can operate and self tune
		0					Main power supply DC24V
			0				PROM is pre made by the user
			one				Made by the manufacturer
				0			No communication interface
				one			There is a communication interface
					0		No data setter
					one		There is a data setter
						0	No backup manual unit available
						one	There is a backup manual unit (preset type)
						two	There is a backup handheld unit (tracking type)

[Programmable controller]KMP type programmable arithmetic unit

2026-6-17 11:23:26

The KMP programmable arithmetic unit is widely used in industrial automation such as metallurgy, chemical industry, petroleum, and power.
Model representation

Basic model	Select Specification		Additional specifications	content
Basic model	main power supply	PROM production	Additional specifications	content
KMP001				Composite arithmetic unit
	0			DC 24V
		0		PROM formation: Created by the user
		one		PROM formation: made by the manufacturer
			0	No communication interface
			-1	There is a communication interface

JSPW-04 Programming Interface Board
The JSPW-04 programming interface board is used for programming user programs for KMM programmable controllers and KMP programmable arithmetic units. It is compatible with IBM-PC, PC/XT, PC/AT or their fully compatible machines (such as Great Wall 05200530; Donghai 05200530) as an expansion board for PCs, and is driven by programming software to achieve the purpose of programming and creating user EPROMs.

[Programmable controller]DVP-10SX series programmable controller

2026-6-17 11:23:17

DVP-10SX series programmable controller

Slim Analog Host SX Series
Integrating digital, analog, communication, and display functions
Main functions and features:
10 host points (4DI+2DO+2AI+2DO)
8K Step Program Memory
Maximum 230 digit expansion points
30kHz high-speed counter, 50kHz pulse output
Built in RS-232 and RS-485 dual communication ports
Slave mode Modbus ASCII/RTU can be selected
Can connect 8 analog and temperature expansion modules
PID, PLC Easy Link (16 stations), 1600 file buffer, 168 application instructions
Built in 2AD (12 bit resolution) and 2DA (12 bit resolution)

[Programmable controller]SS series programmable controller

2026-6-17 11:23:09

The SS series PLC has a rich instruction set and various expansion modules. Its ultra small size and two independent communication ports make it widely used in industrial control and civilian fields.

Main functions and features:
14 point host, expandable up to 256 points, can connect up to 8 analog modules
Built in RS-232 and RS-485 ports
RUN/STOP operation switch
The volume of the cigarette box size meets the customer's space requirements
Detachable terminal block
A/D, D/A, AX, PT module types are complete
DC power supply 24VDC power supply
CE UL certification

SS series host
model	explanation
DVP14SS11R2	Host at 14:00, in at 8:00, out at 6:00 (relay), DC power supply SLIM
DVP14SS11T2	Host at 14:00, in at 8:00, out at 6:00 (transistor), DC power supply SLIM

SS series expansion machine
model	explanation
DVP04AD-S	4-channel AI, 14 bit, non isolated channel, DC power supply, built-in RS485 SLIM
DVP02DA-S	2-channel AO, 12 bit, non isolated channel, DC power supply, built-in RS485 SLIM
DVP06XA-S	4-channel AI, 2-channel AO, 12 bit, non isolated channel, DC power supply, built-in RS485 SLIM
DVP04PT-S	4-channel PT100, 14 bit (0.1 degrees Celsius), non isolated channel, DC power supply, built-in RS485 SLIM
DVP08SM11N	Expansion machine at 8 o'clock, input at 8 o'clock, DC power supply SLIM
DVP08SN11R	Expansion machine at 8 o'clock, relay at 8 o'clock, DC power supply SLIM
DVP08SN11T	8-point expansion machine, 8-point output (transistor), DC power supply SLIM
DVP08SP11R	8-point expansion machine, 4-point input, 4-point output (relay), DC power supply SLIM
DVP16SP11R	16 o'clock expansion machine, 8 o'clock in, 8 o'clock out (relay), DC power supply SLIM
DVP16SP11T	16 point expansion machine, 8-point input, 8-point output (transistor), DC power supply SLIM

SS series power module
model	explanation
DVPPS01	Power module, AC220V input, DC24V output, maximum output current 1A, SLIM

peripheral devices
model	explanation
DVPAADP01	HPP dedicated power supply (including DVPACAB315)
DVPHPP01	Handheld programmer (including DVPACAB115)
DVPHPP02	Handheld programmer (including DVPACAB115 and DVP-256FM)
DVP-256FM	FLASH MEMORY 256K
DVPACAB115	HPP and PLC connection cable 1.5m
DVPACAB215	PC or TP02/04G and PLC connection cable 8pin -9pin/25pin 1.5m
DVPACAB230	PC or TP02/04G and PLC connection cable 8pin -9pin/25pin 3.0m
DVPACAB2A30	PC or TP02/04G with PLC connection cable 8pin -9pin 3.0m
DVPACAB315	HPP and DVPAADP01 connection cable 1.5m
DVPACAB403	Expansion machine connection cable 30cm
DVPACAB515	TP02/04G programming cable 1.5m
DVPACAB530	TP02/04G connection cable 3.0m

SS series programmable controller

[Programmable controller]DVP-12SC series programmable controller

2026-6-17 11:23:01

DVP-12SC series programmable controller

Slim Positioning Host SC Series
Easy servo position control with built-in positioning function
Main functions and features:
Number of host points 12
8K Step Program Memory
Maximum 234 digit expansion points
100KHz high-speed counter, 100KHz pulse output (providing servo positioning instructions)
Built in RS-232 and RS-485 dual communication ports
Slave mode Modbus ASCII/RTU can be selected
Can connect 8 analog and temperature expansion modules
PID, PLC Easy Link (16 stations), 1600 file buffer, 171 application instructions
Provide servo position control instructions

[Programmable controller]SA series programmable controller

2026-6-17 11:22:52

SA series programmable controller

Main functions and features:
Number of host points 12
8K Step Program Memory
Maximum 236 digital expansion points
30kHz high-speed counter, maximum 50kHz pulse output
Built in RS-232 and RS-485 dual communication ports
Slave mode Modbus ASCII/RTU can be selected
Can connect 8 analog and temperature expansion modules
PID, PLC Easy Link (16 stations), 1600 file buffer, 168 application instructions

[Programmable controller]EH series programmable controller

2026-6-17 11:22:44

The main functions and features of EH series programmable controllers are:

16, 20, 32, 48, 60, 80 point hosts, expandable up to a maximum of 512 points
2-channel high-speed counting module up to 512KHZ
The maximum output of 2-channel transistors is 200KHZ, and the module can reach 512KHZ
16K program capacity, multiple function cards, expansion modules, and special modules
ASIC technology, powerful functionality, can run up to 0.2US in a single step
RUN/STOP operation switch with 2 potentiometers and detachable terminals

[Programmable controller]ES/EX series programmable controller

2026-6-17 11:22:35

The ES/EX series programmable logic controller PLC has a small size, rich instructions, and can be easily connected to a network to achieve complex control. It has a high cost performance ratio and is suitable for on-site detection and automatic control in various industries.

Main functions and features:
14/20/24/32/60 point host, expandable up to a maximum of 256 points
4K program capacity (EEPROM)
5kHz high-speed counting/2-channel 10kHz pulse output
Built in RS-232C and RS-485 (Modbus Master/Slave)

EX host with 4AI/2AO
Relay or transistor output
AC power input 100-240VAC (-15% -10%), DC power input 24VDC
CE UL certification

[Programmable controller]HITECH Human Computer Interface

2026-6-17 11:22:26

HITECH human-machine interface and ACE text display. This product is mainly used for monitoring and controlling programmable controllers, monitoring and modifying the values and status of PLC internal registers or relays in the form of visual text, indicator lights, animations, curves, etc. So that operators can control the machinery and equipment freely.

The hardware reliability of HITECH human-machine interface has been verified in various application scenarios around the world, and its quality has been recognized by customers. It is currently the most cost-effective product in the market, and its editing software is constantly updated and improved, with new features leading the human-machine interface industry.

[Programmable controller]DOP-A75CSTD Human Computer Interface

2026-6-17 11:22:18

The DOP-A75CSTD human-machine interface product features a 256 color STN color display, user-friendly interface, high-speed hardware structure, and presents users with a truly user-friendly and programmable input interface.

Product Features:

1. Support existing and future PLCs from various manufacturers
2. Quick execution of macros
3. Communication giant
4. USB upload/download

6. Two communication ports can use different protocols
7. Online/offline simulation
8. Support SMC card
9. Multiple password settings

DOP-A75CSTD Human Computer Interface Technical Specification:

Monitor: 7.5'STN (256 colors)
Resolution: 640 * 480 pixels
Backlight: CCFL * 2/20000Hrs
Display area size: 158 * 118mm
Touch screen: resistive type
Function keys: 6 keys
System key: 1 key
CPU type: 32-bit RISC microprocessor (266MHz)
Calendar: Built in
Application storage area: 7Mbytes Flash
System program storage area: 256Kbytes SRAM (using lithium battery)
Data temporary storage area: 32Mbytes SDRAM
Serial communication ports: COM1 (RS-232), COM2 (RS-232/RS-485/RS-422)

13. Expansion slot: 4~128Mbytes SMC card
Download ports: COM1 (RS-232), COM2 (RS-232/RS-485/RS-422), USB (Ver1.1)
14. Operating voltage: 24VDC (-10%~+15%)
15. Power consumption:<10W
16. Working temperature: 0 ° C~+50 ° C
17. Storage temperature: -20 ° C to+60 ° C
18. Operating humidity: 10~90% RH, no condensation
19. Protection level: IP65/NEMA4
20. Cooling method: Natural cooling
21. Appearance dimensions (W * H * D): 243.1mm * 178.1mm * 39mm
22. Hole size: (W * H): 231.4mm * 166.4mm
23. Weight: 950g

[Programmable controller]CPM2A Programmable Controller

2026-6-17 11:22:09

CPM2A Programmable Controller

power supply	output format	input	output	model
AC power supply	relay	twelve o'clock	eight o'clock	CPM2A/2AH-20CDR-A
DC power supply	relay			CPM2A-20CDR-D
	Transistor (drain type)			CPM2A-20CDT-D
	Transistor (source type)			CPM2A-20CDT1-D
AC power supply	relay	six p.m.	twelve o'clock	CPM2A/2AH-30CDR-A
DC power supply	relay			CPM2A-30CDR-D
	Transistor (drain type)			CPM2A-30CDT-D
	Transistor (source type)			CPM2A-30CDT1-D
AC power supply	relay	twelve p.m.	four p.m.	CPM2A/2AH-40CDR-A
DC power supply	relay			CPM2A-40CDR-D
	Transistor (drain type)			CPM2A-40CDT-D
	Transistor (source type)			CPM2A-40CDT1-D
AC power supply	relay	twelve p.m.	four p.m.	CPM2AH-S40CDR-A
AC power supply	relay	36 points	twelve p.m.	CPM2A/2AH-60CDR-A
DC power supply	relay			CPM2AE-60CDR-A
	relay			CPM2A-60CDR-D
	Transistor (drain type)			CPM2A-60CDT-D
	Transistor (source type)			CPM2A-60CDT1-D

CPM2A Programmable Controller

[Programmable controller]CJ1 series programmable controllers

2026-6-17 11:22:01

CJ1 series programmable controller

SYSMAC CJ2
From single device control to network connectivity and high speed·
High precision equipment control, CJ2 provides the ability to meet
CPU units with various control requirements.
Programmable controller
SYSMAC CJ1
Medium sized Omron universal PLC,
There is a CPU unit with built-in input/output type.

[Programmable controller]CP1H/1L series programmable controllers

2026-6-17 11:21:53

CP1H/1L series programmable controller

Combining numerous advantages into one.
With rich built-in functions,
Expanded the scope of applications
And for longer/more complex ladder diagram programs
The design time has also been shortened

[Programmable controller]ABB-AC500 Programmable Controller

2026-6-17 11:21:44

AC500 is a flexible and consistent expansion and upgrade product that can adapt to various automation tasks. Various related devices can be flexibly combined and used according to user needs, thereby minimizing inventory.

[Programmable controller]PCD46440 Programmable Controller

2026-6-17 11:21:36

Overview
The PCD46440 programmable controller is suitable for automatic control of building equipment, factory equipment, environmental equipment, automatic water supply and drainage equipment, etc. It can automatically adjust the operating status of various central air conditioning, chiller, water pump, dosing pump, solenoid valve, frequency converter and other systems according to various user requirements and under different external environmental conditions, to meet the monitoring and control of pressure, flow rate, temperature, water quality. This control can also be used for power monitoring, water supply and drainage control, and refrigeration station monitoring. Depending on the control object, various methods such as decentralized DDC control and distributed DDC control can be selected, making it flexible and reliable in operation.
Functions and features
1. Real time on-site measurement of switch signals and analog signals, displaying the measured values of the measured parameters on site in real time.
2. Real time modification of set values and control parameter values.
3. Fully automatic operation control.
4. Data power failure protection function.
5. Manual and automatic switching function.
6. Fieldbus CAN BUS communication function, RS-485 communication function.
7. Password protection: mainly to protect the settings within the system, so as to ensure that only authorized personnel can access and update
Data within the new system.
8. Timing control: The controller can be started and stopped according to the schedule set by the operator.
9. Small size: This product adopts a compact structure, so its installation is very free.
10. I./O module configuration: Depending on the required functionality, the input and output types can be selected, and the actual number of managed points can be increased or decreased.
11. Programmable: Strong programmability, able to directly program complex applications in C language.
12. It can be connected to the user interface module, so setting change operations can be implemented on the controller site.
13. Implement remote control through user terminals
Remote device operation/stop control and temperature setting change operations can be achieved by connecting to the user terminal.
14. Connection with the central monitoring system: By connecting to the central monitoring system through the CAN communication protocol, building equipment can be centrally managed.
15. Self discipline and decentralization: Even in the event of abnormalities in the central monitoring system, this product can independently perform backup operations, thus dispersing the risk of system failures.
16. Installation: DIN rail installation or screw installation can be selected.
17. High reliability, strong anti-interference ability, and overvoltage protection function.
18. Easy to operate.

PCD46440 Programmable Controller Specification

Project			specification
Power Specifications		rated voltage	DC 24V 50/60Hz
Power Specifications		Use power supply voltage	DC18��27.6V
input	Number inputs (6)	Passive input	switch signal
		active input	standard DC24V
		Pulse input
	Analog inputs (4)	voltage input	0��5V
		voltage input	0��10V
		Current input	0��20mA
		NTC, PT inputs	NTC10K��PT100�� PT1000
output	Digital outputs (4)	output method	voltage output
	Digital outputs (4)	output method	Dry touch Point output
	Analog outputs (4)	voltage output	0��10V
	Analog outputs (4)	current output	0��20mA
environmental conditions	Rated working conditions	ambient temperature	0��50��
		ambient humidity	10-90% RH (non condensing)
		vibration	Maximum 5.9m/s ^ 2 (0.6G) (10-150Hz)
	Transportation and storage conditions	ambient temperature	-20��60��
		ambient humidity	5-95% RH (non condensing)
		Vibration (storage)	Maximum 5.9m/s ^ 2 (0.6G) (10-150Hz)
communication	Optoelectronic isolated CAN network (Communication between controllers)	communication speed	1Mbps
		communication range	10km
	485 communication with optoelectronic isolation (Connect expansion board communication)	communication speed	78Kbps
		communication range	1.2km
Weight (kg)			0��9kg
Dimensions (mm)			168×115×40
Main material components			ABS�� beige
terminal block			Plug in terminal block, terminal spacing 5.08mm

[Programmable controller]VC6 series intelligent technology controller

2026-6-17 11:21:27

model

input

power supply

output

power supply

Input letter

Number polarity

coefficient

setting

signal

relay

output

external connection

zero clearing

AC85-

264V

DC24V

DC12V

biography

feel

device

use

PNP

zero point zero zero zero zero zero one

-999999

multiplication

operation

single

letter

number

J2 normally open

A normally closed

Nothing

NPN

J2 normally open

A normally closed

Nothing

PNP

J2 normally open

have

NPN

J2 normally open

have

VC6 series intelligent technology controller

[Programmable controller]GSK-100 series small programmable controller

2026-6-17 11:21:19

GSK-100 series small programmable controller

[Programmable controller]GSK-200 series small programmable controller

2026-6-17 11:21:10

GSK-200 series small programmable controller

[Programmable controller]DHC8A-2a type programmable time controller

2026-6-17 11:21:02

Delay range	Cycle every week or day	Display size	LCD
timing method	24 hours/12 hours	contact capacity	16A AC250V (twoNormally open)
Voltage	AC220V 50Hz 75%-110%
Overall dimensions	50X100X66mm	Electrical lifespan	�� 5X105 times
Delay error	�� 2 seconds/day	Installation method	Guide rail, device
Programmable numbers	8 times/week or day	Characteristics	Battery, power outage continues for 15 days

DHC8A-2a Programmable Time Controller

[Programmable controller]KSO1,KSO2 type programmable time controller

2026-6-17 11:20:53

Delay range	Daily cycle	Display size	LCD
timing method	-	cutout size	-
Voltage	AC220V 50Hz 75%-110%	work mode	-
Overall dimensions	123X60X688mm	Installation method	10A \| 16A wall socket
Delay error	�� 1 second/day	Other functions	-
Programmable numbers	8 times/day	Characteristics	Built in battery, continues to operate during power outages
contact capacity	10A AC250V\|16A AC250V	Number	twenty-four
Electrical lifespan	�� 5X105 times

KSO1, KSO2 Programmable Time Controllers

[Programmable controller]DHC12 Programmable Time Controller

2026-6-17 11:20:45

DHC12 Programmable Time Controller

Delay range	Daily cycle	Display size	LCD
timing method	24 hours/12 hours	contact capacity	16A AC250V (1 normally open and 1 normally closed)
Voltage	AC220V 50Hz 75%-110%	Electrical lifespan	�� 5X105 times
Overall dimensions	56X92X38mm	Installation method	Guide rail, device
Delay error	�� 2 seconds/day	Characteristics	Battery, power outage continues for 15 days
Programmable numbers	8 times/week or day

DHC12 Programmable Time Controller

[Programmable controller]DHC16-2a type programmable time controller

2026-6-17 11:20:36

Delay range	Cycle every week or day	Display size	LCD
timing method	24 hours/12 hours	contact capacity	25A AC250V (twoNormally open)
Voltage	AC220V 50Hz 75%-110%	Electrical lifespan	�� 5X105 times
Overall dimensions	72X115X52mm	Installation method	Guide rail, device
Delay error	�� 2 seconds/day	Characteristics	Battery, power outage continues for 15 days
Programmable numbers	8 times/week or day

DHC16-2a Programmable Time Controller

[Programmable controller]DHC15B Programmable Time Controller

2026-6-17 11:20:28

Voltage	AC 180V - 250V	Number of contacts	1 normally open, 1 normally closed
Timing error	�� 2 seconds/day (25 ��)	control the current	Resistive load: 16A/250VAC (COS Ø=1)
Set switch frequency	Open 6 times and close 6 times		Inductive load: 2.5A/250VAC (COS Ø=0.6)
Overall dimensions	36X81X66mm		Lamp current: 1000W
Power consumption	<4VA	Power outage memory	�� 15 days (after continuous power on for 48 hours)
Display size	LCD display	Usage temperature	-10��40��
Weight	About 125g	Humidity	35~85%RH
Electrical lifespan	105 times	Installation method	Guide rail, device
mechanical life	107 times

DHC15B Programmable Time Controller

[Programmable controller]DHC16-1a type programmable time controller

2026-6-17 11:20:19

Delay range	Cycle every week or day	Display size	LCD
timing method	24 hours/12 hours	contact capacity	25A AC250V
Voltage	AC220V 50Hz 75%-110%	output format	AC220V
Overall dimensions	72X115X52mm	Electrical lifespan	�� 5X105 times
Delay error	�� 2 seconds/day	Installation method	Guide rail, device
Programmable numbers	8 times/week or day	Characteristics	Battery, power outage continues for 15 days

DHC16-1a Programmable Time Controller

[Programmable controller]DHC15A series track type programmable time controller

2026-6-17 11:20:10

DHC15A series track type programmable time controller

Delay range	Cycle every week or day	Display size	LCD
timing method	24 hours/12 hours	contact capacity	16A AC250V (1 normally open and 1 normally closed)
Voltage	AC220V 50Hz 75%-110%	Electrical lifespan	�� 5X105 times
Overall dimensions	36X81X66mm	Installation method	Guide rail, device
Delay error	�� 2 seconds/day	Characteristics	Battery, power outage continues for 15 days
Programmable numbers	8 times/week or day

DHC15A series track type programmable time controller

[Programmable controller]DHC8A type programmable time controller

2026-6-17 11:20:02

Delay range	Cycle every week or day	Display size	LCD
timing method	24 hours/12 hours	contact capacity	16A AC250V DHC8A-1c (1 normally open and 1 normally closed)
Voltage	AC220V 50Hz 75%-110%		25A AC250V DHC8A-1a (1 normally open)
Overall dimensions	50X100X66mm	Electrical lifespan	�� 5X105 times
Delay error	�� 2 seconds/day	Installation method	Guide rail, device
Programmable numbers	8 times/week or day	Characteristics	Battery, power outage continues for 15 days

DHC8A Programmable Time Controller

[Programmable controller]DHC8 type programmable time controller

2026-6-17 11:19:54

Time range	Weekly or daily cycle	Display	LCD with backlight source
timing method	24 hours/12 hours	cutout size	45X45mm
Voltage	AC220V 50Hz 75%-110%	Installation method	panel
Overall dimensions	48X48X96mm	contact capacity	12A AC250V
Delay error	�� 2 seconds/day	Electrical lifespan	�� 5X105 times
Programmable numbers	8 times/week or day	Characteristics	Built in battery, power outage continues for 15 days

DHC8 Programmable Time Controller

[electronic counter]H2C,H3C,H4C preset counter

2026-6-17 11:18:42

H2C H3C H4C preset counter

Action mode: counting up or down
Digital display: 2, 3, 4 digit display
Counting input: Contact (1+4) input
Counting speed: 250ps or 60cps
Reset method: Power off reset or contact (1+3) reset
Capable of producing countdown counting (code Y) and automatic zeroing (code S)

Maximum counting speed 30cps		H2C-X H3C-X H4C-X	H2C-XM H3C-XM H4C-XM	H2C-G H3C-G H4C-G	H2C-GM H3C-GM H4C-GM	H2C-P H3C-P H4C-P	H2C-PM H3C-PM H4C-PM
Maximum counting speed 250cps(L)		H2C-XL H3C-XL H4C-XL	H2C-XLM H3C-XLM H4C-XLM	H2C-GL H3C-GL H4C-GL	H2C-GLM H3C-GLM H4C-GLM	H2C-PL H3C-PL H4C-PL	H2C-PLM H3C-PLM H4C-PLM
Maximum counting speed 1Kcps(F)		H2C-XF H3C-XF H4C-XF	H2C-XFM H3C-XFM H4C-XFM	H2C-GF H3C-GF H4C-GF	H2C-GFM H3C-GFM H4C-GFM	H2C-PF H3C-PF H4C-PF	H2C-PFM H3C-PFM H4C-PFM
Countdown (Y)		H��C-XY H��C-XLY H��C-XFY	H��C-XMY H��C-XLMY H��C-XFMY	H��C-GY H��C-GLY H��C-GFY	H��C-GMY H��C-GLMY H��C-GFMY	H��C-PY H��C-PLY H��C-PFY	H��C-PMY H��C-PLMY H��C-PFMY
Automatic zeroing (S) 0.5 sec or 1.0 sec		H��C-XS H��C-XLS H��C-XFS	H��C-XMS H��C-XLMS H��C-XFMS	H��C-GS H��C-GLS H��C-GFS	H��C-GMS H��C-GLMS H��C-GFMS	H��C-PS H��C-PLS H��C-PFS	H��C-PMS H��C-PLMS H��C-PFMS
Size (mm)		48H×48W×98D
Installation and its base		Exposed type: P2CF-08 Embedded type: Y-50&US-08 or Y-50&P3C-08
rated voltage		12~60VDC/AC 100~240VAC 50/60Hz
Voltage Range		90-110% of rated voltage
Signal input method (Counting, Reset Input)		Contact: Open according to the contact, short-circuit input transistor: ON/OFF input according to the proximity switch or photoelectric switch
Power outage memory (M)		No power outage memory	With power outage memory	No power outage memory	With power outage memory	No power outage memory	With power outage memory
controlled output		Contact 1C 5A 250V 1+4 Count Input Count Input 1+3Reset Return		Contact 1C 5A 250V 1+4 Count Input Count Input 1+3Gate opening control		Contact 1C 5A 250V 1+4 Count Input Count Input 1+3 12VDC 100mA power output
longevity fate	Mechanics	5×10^6 times
	electricity	10^5 times
Return method		Power reset, automatic reset, external reset
recovery time		Power reset: 0.3sec External reset: 0.02sec
power consumption		Max.2VA
Environmental temperature for use		-10��~+55��
Environmental humidity for use		45%~85%RH
weight		Approx.130g

H2C, H3C, H4C preset counter wiring diagram and timing diagram

H2C, H3C, H4C preset counter appearance dimension diagram

H2C, H3C, H4C preset counters

[electronic counter]CM-4 electronic counter

2026-6-17 11:18:34

CM-4 electronic counter

Action mode: counting up or down
Digital display: 4-digit display
Counting input: contact (2+1) input
Counting speed: 30CPS, 250CPS, 1000CPS
Reset method: Power off reset or contact (2+4) reset

model		CM-4
Size (mm)		48H×96W×94D
Installation and its base		--
rated voltage		12~60VDC/AC 100~240VAC 50/60Hz
controlled output		2+1 Count Input Count Input 2+3 Gate opening control 2+4 Reset Reset 5+6 12 VDC 100mA power output
longevity fate	Mechanics	--
	electricity	--
Setting error		0
recovery time		0.1 sec max
power consumption		2VA
Environmental temperature for use		-10��~+55��
Environmental humidity for use		45%~85%RH
weight		210g

CM-4 electronic counter wiring diagram and timing diagram

Appearance dimension diagram of CM-4 electronic counter

CM-4 electronic counter

[electronic counter]L2C,L3C,L4C Multi functional digital counter

2026-6-17 11:18:25

L2C, L3C, L4C multifunctional digital counters

It has 2-digit, 3-digit, and 4-digit counting functions, 7-segment LED digital display, uses contact input, and can also be externally connected to use proximity switches or photoelectric switches for input. It has high-speed response characteristics, with a counting speed of up to 1000 times per second, allowing the setting value to be changed during counting. It has a button locking function, and the action mode can be selected as up or down. It also has a power-off memory function.

model		L2C-X L3C-X L4C-X	L2C-G L3C-G L4C-G	L2C-P L3C-P L4C-P	L2C-11 L3C-11 L4C-11
Size (mm)		48H×48W×93D
Installation and its base		Exposed type: P2CF-08 or P2CF-11 Embedded type: Y-50&US-08 or Y-50&P3C-08 or Y-50&US-11
Indicator light action		Count to indication
Input signal method (Counting, Reset Input)		Contact: Open according to the contact, short-circuit input transistor: ON/OFF input according to the proximity switch or photoelectric switch
rated voltage		12~60VDC/AC 100~240VAC 50/60Hz
Voltage Range		90-110% of rated voltage
controlled output		Contact 1C 5A 250V 1+4 Count Input Count Input 1+3 Rset Reset	Contact 1C 5A 250V 1+4 Count Input Count Input 1+3 Gate opening control	Contact 1C 5A 250V 1+4 Count Input Count Input 1+3 12VDC 100mA power output	Contact 1C 5A 250V 6+5 Count Input Count Input 6+7 Reset on/off control 1+4 Gate Return 1+3 12VDC 100mA power output
longevity fate	Mechanics	5×10^6 times
	electricity	10^5 times
Return method		Power reset, external reset
recovery time		Power reset: 0.3 seconds External reset: 0.02 seconds
power consumption		Max.2VA
Environmental temperature for use		-10��~+55��
Environmental humidity for use		45%~85%RH
weight		Approx.130g	Approx.130g	Approx.120g	Approx.120g

L2C, L3C, L4C multifunctional digital counter wiring diagram and timing diagram

Exterior dimension diagram of L2C, L3C, L4C multifunctional digital counters

[electronic counter]BHC3J electronic counter

2026-6-17 11:18:17

BHC3J electronic counter

[electronic counter]ZHC6J-M electronic counter

2026-6-17 11:18:08

ZHC6J-M electronic counter

[electronic counter]SJ-6 electronic counter

2026-6-17 11:18:00

SJ-6 electronic counter

[electronic counter]ATC3J electronic counter

2026-6-17 11:17:51

ATC3J electronic counter

[electronic counter]ATC48J electronic counter

2026-6-17 11:17:43

ATC48J electronic counter

Display mode: 4-digit 0.30 "LED
Counting range: 01 to 9999
Maximum preset number: 1 to 9999
Counting speed: 30/200 times/second
Power outage maintenance: 10 years
Voltage output: DC12V
Reset method: panel, terminal
Input signal: high/low level: low type: contact signal, electrical signal, sensor (DC) valid
Output format: R format (seconds):/N/F format: N/F
Counting mode: Addition X1, X10, X100
Hole size: 45 × 45mm
Relay output: 2 sets of relays
Power supply voltage: AC: AC90-240 DC: DC12-24V

[electronic counter]ATC6J-J electronic counter

2026-6-17 11:17:34

ATC6J-J electronic counter

Display mode: 5-digit 0.56 "LED
Counting range: 01 to 99999
Maximum preset number: 1 to 99999
Counting speed: 30/1000 times/second
Power outage maintenance: selective memory
Voltage output: DC12V
Reset method: panel, terminal
Input signal: High and low levels: CP1, CP2 Type: Contact signal, electrical signal, sensor
Output format: R format (seconds):/N/F format: N
Counting mode: reversible A, B, C
Hole size: 45 × 92mm
Power supply voltage: AC: AC90-240 DC: DC12-24V
Function selection: K1~K4 function selection

[electronic counter]DH14J electronic counter

2026-6-17 11:17:26

The DH14J electronic counter adopts large-scale integrated circuits, LED digital display, and strong reliability

Digital switch preset. Set correctly and conveniently
Can connect or disconnect the circuit according to the preset number
Set X1, X10, X100 magnifications, select a total of
Counting signal photoelectric isolation

[electronic counter]JDM14 electronic counter

2026-6-17 11:17:18

JDM14 electronic counter

Technical scope: 1 to 9999
Counting speed: 25/200 times/second
Voltage: AC/DC100-240V (or AC/DC12V-24V)
Dimensions: 52 × 104 × 106mm
Input signal: Contact signal or non-contact signal (electrical signal, sensor signal, etc.) High level voltage H: 4V~30V, low level voltage L: 0~2V Input impedance: 4.7K
Power output: DC12V 30mA for sensor power supply
Display size: 0.3-inch LED digital display
Hole size: 46 × 77mm
Output modes: N, F, R
Power outage maintenance: 10 years
Output form: 1 set of relays
Installation method: panel, guide rail, device
Electric shock capacity: 3A AC250V (impedance)
Reset method: panel, terminal, automatic
Features: Easy to connect with sensors

[electronic counter]DL527 type seven bit electromagnetic counter

2026-6-17 11:17:09

The DL527 seven position electromagnetic counter relies on an external electrical signal to drive the electromagnet in the counter, and the counting structure inside the counter is driven by the armature to accumulate and count. It is used to record the accumulation of electrical signal times and does not bring back a zero device.

The DL527 seven digit electromagnetic counter is mainly used for various electric pulse counting in industries such as power, petroleum, chemical, textile, machinery, mining, national defense, food, printing, etc. It can be combined with other instruments to form a digital display instrument.

model	DL527 seven digit electromagnetic counter
Overall dimensions	51.5mm×37.4mm×23.2mm
Display numerical specifications	Height x Width: 4 mm x 1.8 mm
Operating Temperature	-10�桫+50��
relative humidity	��85%
Maximum cumulative computing capacity	nine million nine hundred and ninety-nine thousand nine hundred and ninety-nine
Working Voltage	DC: Various specifications and models ranging from 5V to 220V; AC: 24V~240V Various specifications and models
Counting speed	AC: �� 5 times/second; DC: �� 15 times/second
power	AC:4.0VA; DC:3W

DL527 seven digit electromagnetic counter

[electronic counter]EA308 Built in battery electronic counter

2026-6-17 11:17:00

The EA308 built-in battery electronic counter adopts the latest international popular appearance design, with an 8-bit LCD digital display and zero blanking function for individual bits and above.
It has the characteristics of strong anti-interference ability and easy use.
The built-in battery electronic counter is powered by an internal battery and has a lifespan of up to 3 years. Upon expiration, the battery can be replaced for continued use.
No external active counting signal is required, and counting can be directly driven by mechanical contact switches.
The EA308 built-in battery electronic counter can be widely used in industries such as mechanical packaging, stamping machines, elevators, terminal pressing, etc.

display	8-bit LCD
Word height	7 millimeters
Power supply voltage	Built in battery 3V
Power consumption	��0.5W
Data saving	3 years (based on battery life)
Maximum counting frequency	10Hz
Counting method	Increasing or decreasing
Signal duty cycle	1��1
Working environment temperature	-10��~+50��
Storage environment temperature	-20��~+65��
External reset	Manual and automatic
weight	About 50g

EA308 built-in battery electronic counter

[electronic counter]711C series electronic counter

2026-6-17 11:16:52

The 711C electronic counter is a newly developed counter for the Chinese market based on the 711 counter from the German company HENGTLER. It uses highly integrated surface mount components, occupying a small space but providing multiple functions to meet various special usage requirements.

Added ratio function on the basis of 711A, which can be used to measure length, displacement, depth, flow rate, etc.
Six digit digital tube (LED) display has high clarity, easy identification, and is not easily affected by temperature and light. It can be widely used in industries such as packaging, printing, textiles, and machinery.

model	711C-P-DC	711C-P-AC	711C-P-DC-1	711C-P-AC-1
display	6-digit red LED display with a height of 7mm
Voltage (fluctuation range: DC type ± 10%)	DC��12 V��24V	AC��85 V��265V	DC��12 V��24V	AC��85 V��265V
power	2W
data retention	10 years
input impedance	22k��
Threshold voltage	High level �� 8 V, low level �� 2 V
Extreme voltage	Positive and negative 40V
Count (reset) signal frequency	30Hz or 5kHz, can be set through programming switches
Counting signal triggering method	Right along	Right along	Negative edge	Negative edge
Minimum pulse width	17ms or 100 �� s, can be set through programming switches
Signal output mode	relay output
Signal output time	Minimum 50ms, approximately 1s in the middle, can be set to steady state
load capacity	50VA�� Maximum voltage AC: 250V; DC��30V, Maximum current 2A
duty cycle	1��1
protection level	Level 2
Front panel protection	IP54��DIN40050
Rear panel protection	IP00��DIN40050
anti-interference capability	Level 2 (IEC801)
Operating Temperature	-10��~+50��
Storage temperature	-20��~+70��
weight	160g
Additional features	Ratio function, can preset reset password

711C series electronic counter

[electronic counter]S3J LCD Counter

2026-6-17 11:16:43

Working principle and introduction of S3J LCD counter:

Six digit LCD display, clear display;
Internal built-in power supply, no need for external connection;
Panel reset with lock, safe and reliable;
Has good anti-interference ability;
Accurate counting, widely used, can be applied in timing and counting fields such as elevators, machinery, packaging, switchgear, etc.
No mechanical wear and tear, long lifespan.

model	S3J
display	LCD display
digit	6 people
character height	6 millimeters
power supply	Built-in lithium battery
battery life	About 7 years
Counting frequency	10Hz
counting range	0~999999
Reset method	Panel button reset or external terminal reset
protection level	Level 2
Front panel protection	IP54,DIN40050
Rear panel protection	IP00,DIN40050
anti-interference capability	IEC801�� Level 2
Operating Temperature	-10�桪+50��
Storage temperature	-20�桪+70��
Environmental humidity for use	35��85%RH
weight	About 60g

S3J LCD Counter

[electronic counter]721A electronic counter

2026-6-17 11:16:35

The 721A electronic counter is a newly developed counter for the Chinese market based on the 721 counter from the German company HENGTLER. It uses highly integrated surface mount components, occupying a small space but providing multiple functions to meet various special usage requirements.

The 721A electronic counter adopts highly integrated surface mount components, occupying a small space.
Strong counting function, can be driven by signals such as voltage pulses, proximity switches, photoelectric switches, shaft encoders, or mechanical contact switches to count, with high counting frequency.
It can be reset by both the front panel and external electrical signals, making it easy to use.
The internal unique memory can store the count value for ten years without the need for batteries after power failure or shutdown.
5-digit red digital tube (LED) display, high clarity, easy identification, not easily affected by temperature and light.
It can be used for counting work that intermittently returns to zero, such as statistical counting, mechanical rotation, currency counting, flow counting, group selection counting, etc. It is widely used in industries such as packaging, textile, machinery, printing and dyeing.
At the same time, a four digit counter with the same function can be made according to customer needs.

Threshold voltage	High level �� 5 V, low level �� 1 V
Extreme voltage	Positive and negative 40V
Count (reset) signal frequency	30Hz or 5kHz, can be set through programming switches
Counting (reset) signal triggering method	Negative edge
Minimum pulse width	17ms or 100 �� s, can be set through programming switches
Ratio setting range	0.001-9.999
Signal output mode	relay output
Signal output time	Minimum 50ms, approximately 1s in the middle, can be set to steady state
load capacity	Relay output: 50VA, maximum voltage AC: 250V; DC��30V, Maximum current: 1A
load capacity
duty cycle	1: 1
Anti interference level	Level 3 (IEC801)
Front panel protection	IP54��DIN40050
Rear panel protection	IP00��DIN40050
Operating Temperature	��
Storage temperature	-20��~+70��
weight	About 220g

721A electronic counter

[electronic counter]HJ118 electronic counter

2026-6-17 11:16:26

The HJ118 electronic counter is the latest developed counter for the Chinese market. It uses highly integrated surface mount components, occupying a small space but providing multiple functions to meet various special usage requirements. Double eight digit LCD display can be widely used in industries such as packaging, printing, textiles, and machinery.

The HJ118 electronic counter includes two functions: a single preset proportional counter and a single preset timer. For the counting function: Users can use the keyboard to input preset values and proportional parameters. When the count value is equal to or exceeds the preset value, there will be a signal output. The signal is output by a relay, and users can use this signal to control other devices to achieve automation. This counter can be set to increment, decrement bidirectional counting, or automatic loop counting according to user needs. For timing function: Users can use the keyboard to input preset time and output timing. You can set the status such as whether the countdown is timed in a loop or not. This counter is equipped with a memory function, and when the counter loses power, the recorded data is memorized without loss

model	HJ118
display	LCD display font height 7mm
Voltage (fluctuation range: ± 10%)	DC��12V��24VDC±10%
data retention	10 years
Trigger along	falling edge
Threshold voltage	High level �� 5V, low level �� 1V
Extreme voltage	Positive and negative 40V
Count (reset) signal frequency	30Hz or 5000Hz
duty cycle	1��1
Signal output time	50ms~2500ms or steady state
Pre set proportion range	0.001 �� 9.999
Maximum timing range:	0��999999-59-59
Display mode:	Method 1: hhhhhh.mm (hour minute) Method 2: hh mm ss (hour minute second)
Operating Temperature	-5��~+50��
Storage temperature	-10��~+60��

HJ118 electronic counter

[electronic counter]ED105N Serial electronic counter

2026-6-17 11:16:14

The ED105N serial electronic counter is a newly developed counter for the Chinese market based on the 710 type counter from the German company HENGTLER. It uses highly integrated surface mount components, occupying a small space but providing multiple functions to meet various special usage requirements.

The ED105N serial electronic counter is a six digit digital tube (LED) display with high clarity, easy identification, and is not easily affected by temperature and light. It can be widely used in industries such as packaging, printing, textiles, and machinery

model	ED105N
display	7-digit red LED display with a height of 7mm
Voltage (fluctuation range: ± 10%)	DC��12V��24VDC±10%
power consumption	milliampere
data retention	10 years
Trigger along	Negative edge
Threshold voltage	High level �� 12V, low level �� 2V
Extreme counting frequency	Or 5000Hz
duty cycle	1��1
Front panel protection	IP54��DIN40050
Rear panel protection	IP00��DIN40050
Pre set proportion range	�� 9.999
Operating Temperature	-10��~+50��
Storage temperature	-20��~+70��
weight	About 75g

ED105N serial electronic counter

[electronic counter]JDM11-6H electronic counter

2026-6-17 11:16:06

The JDM11-6H electronic counter adopts low-power integrated circuits and high brightness LED display, with no mechanical wear, long service life, clear and beautiful display. It has the function of saving data in case of power outage. When the power supply is interrupted, the recorded data is stored in a persistent memory (E2PROM), which can keep the recorded data for at least ten years. When the power supply is restored, the counting can continue without loss.

Technical parameters of JDM11-6H electronic counter:

Counting digits	Five, six
counting range	0-99999,0-999999
Rated working voltage	DC 12V,24V,AC24V,48V,110V,220V
Counting speed	10 (times/second) and 1000 (times/second)
Working voltage range	85%-110%
power supply wattage	��2W
After power failure	Current data will be stored for 10 years
Counting input method	1: Voltage input type 2: No voltage input type

JDM11-6H electronic counter

[electronic counter]H7EC-N 8-bit electronic liquid crystal counter

2026-6-17 11:15:56

H7EC-N eight digit electronic LCD counter

counting range	0-999999
count(Cumulative times) accuracy	0.005%
Is there a reset	There are two types: zero reset and no zero reset
Working Voltage	Active typePassive type: 6V, 9V, 12V, 15V, 18V, 24V, 36V, 48V, 110V, 220V
Environmental temperature for use	-10��--50��
relative temperature	��85%
Seismic amplitude	10-70HZ 1-8g (gravity degree)

H7EC-N eight digit electronic LCD counter

[electronic counter]H7EC Six digit electronic liquid crystal counter

2026-6-17 11:15:48

The H7EC six digit electronic LCD counter adopts photoelectric isolation, has strong anti-interference ability, uses micro consumption components and high-tech microprocessors, has a novel and flexible structure, ultra small and ultra-thin type, stable and reliable performance, high accuracy, long service life, and is easy to use. It is most suitable for counting, timing, and accumulating time in standard industries, and is widely used in engineering machinery, engineering vehicles, agricultural machinery, generators, air compressors, water pumps, cranes, elevators, light industrial clothing machinery, printing machinery, various types of automobiles, etc. It provides scientific basis for charging and tracking the accumulated actual working time of various precision instruments and equipment, and monitors the assessment and maintenance cycle.

Main technical parameters of H7EC six digit electronic LCD counter:

counting range	0-999999��0-99999999
Counting accuracy (cumulative times)	0.005%
Is there a reset	There is zero
Working Voltage	passive
Environmental temperature for use	-10��--50��
relative temperature	��85%
Seismic amplitude	10-70HZ 1-8g (gravity)

Installation dimensions

H7EC six digit electronic LCD counter

[electronic counter]DSJ-10D electronic counter

2026-6-17 11:15:39

Built in battery, no need for external power supply
Use instructions for 3-5 years
Dimensions 84 × 72 × 25mm
Counting range<30 times/second, ambient temperature -25 �� -70 ��
Weight 180G, relative temperature �� 95%

Instructions for using DSJ-10D electronic counter:
This device adopts built-in electromagnetic induction components and non-contact counting, suitable for on-site counting applications of reciprocating and rotating machinery
Counting range 0-999999, counting cycle, this device has power-off hold function, pause function or decrease function.

DSJ-10D electronic counter

[electronic counter]DSJ-10C(J-10A) electronic counter

2026-6-17 11:15:30

Standard working current: 12V DC, 220V. Dimensions: 84 × 72 × 25mm
Use voltage range specifications: AC/DC 9V-24V, 220V/380V
Counting range<30 times/second, ambient temperature -25 �� -70 ��
Weight 180G, relative temperature �� 95%

Instructions for using DSJ-10C (J-10A) electronic counter:
This device adopts built-in electromagnetic induction components and non-contact counting, suitable for on-site counting applications of reciprocating and rotating machinery
Counting range 0-999999, counting cycle, this device has power-off hold function, pause function or decrease function.

DSJ-10C (J-10A) electronic counter

[electronic counter]SC72-2,SC96-2,SC96-96-2 electronic counter

2026-6-17 11:15:22

SC72-2, SC96-2, SC96-96-2 reversible counting relays use a touch switch to set the value, dual row six position LED display, beautiful appearance, six position green LED display to set the value, six position red LED display to count the value, suitable for control circuits with AC 50/60Hz, voltage up to 380V or DC voltage up to 24V, connect or disconnect the circuit according to the set value, the counter counts correctly, displays clearly, has power-off holding function, and is suitable as a control counting element in automatic control systems.

Technical parameters
Maximum count value: 999999
Rated voltage: AC380V.220V.110V.24V.50/60Hz.DC24V
Voltage tolerance: 85-110% of rated voltage
Power consumption: AC �� 5VA. DC �� 3W
Counting frequency: �� 30PPS duty cycle=50%
Counting error: ��± 1
Contact capacity: AC220V 5A COS=1

SC72-2, SC96-2, SC96-96-2 Electronic Counter Dimensions

SC72-2, SC96-2, SC96-96-2 electronic counters

[electronic counter]JDM15 electronic counter

2026-6-17 11:15:13

The JDM15 series electronic counter is suitable for control circuits with AC 50Hz voltage up to 380V or DC voltage up to 12V. It can preset on/off circuits, count correctly, display clearly, and has power-off holding function.
DIN standard panel size (72 × 72mm), aesthetically pleasing appearance
0.4 foot LED digital display with large and clear fonts
The maximum counting speed reaches 1000times/s
Automatic reset function (time adjustable)
Exactly Countdown And there are multiple working modes available
Built in power outage memory can last up to ten years
DC12V. 30mA auxiliary power output, available for external sensors
Can be directly connected to photoelectric switches, proximity switches, or contact signals
Equipped with 100mA contactless output
Use wiring screws for easy connection

Technical parameters of JDM15 electronic counter
Power supply voltage: AC220V 110V 50/60Hz DC12V (other voltages can be customized)
Working voltage range: 85% to 110%
Minimum signal pulse width: �� 16.7mS [30 times/second (bottom speed)], �� 0.5mS [1000 times/second (high speed) (when the signal duty cycle is 1:1)
Counting range: 0-99999900
Counting signal input
Contact signals: relays, travel switches, etc
Contactless signal: photoelectric switch, etc
Signal input impedance: �� 4.7k ��

Hole size: 68 × 68mm
Input signal voltage: �� 30V
Power consumption: �� 4VA
Weight: Approximately 0.35kg
Reset: Power on reset (without power outage)
Panel button reset
External terminal reset
Automatic reset 0.02-5 seconds adjustable
Contact capacity: AC250V 3A
Contact electrical lifespan: �� 105time
Contact mechanical lifespan: �� 107 time
Installation method: panel type
Temperature range: -10 �� to 50 ��
Humidity range: Relative humidity 85% RH maximum
Power outage memory: �� ten years
Power output: DC12V 30mA maximum

[electronic counter]JDM9-4 preset counter

2026-6-17 11:15:05

JDM9-4 preset counter, which can switch on or off according to the preset number using large-scale dedicated integrated circuits, has strong reliability, power outage memory function, hold and non hold functions, and counting signal photoelectric isolation.

Technical parameters
Power supply: 85% to 110%
Rated voltage: AC: 220V, 110V, 127V, 36V, DC: 24V (other voltages can be customized)
Preset number: 1-9999
Power consumption: �� 3W
Installation method: panel type
Hole size: 70 × 70mm
Contact capacity: 250VAC 3A (resistive)
Contact electrical life: �� 105time (rated capacity)
Contact mechanical lifespan: �� 107 times
Maximum counting speed; 30 times/second
Minimum counting pulse width: 15ms
Display device: LED digital display screen
Environmental temperature: -10 �� to 50 ��
Altitude: �� 2000m

Overall dimensions

JDM9-4 preset counter

[electronic counter]SC72,SC72-6,SC96 preset counter

2026-6-17 11:14:56

SC72, SC72-6., SC96 counters are imported advanced technology, using large-scale specialized integrated circuits and LED digital displays. Referring to foreign process standards, they have the advantages of beautiful appearance, long service life, and large contact capacity. They are used as control components in automation control systems

Technical Specifications
Rated voltage: AC 380V, 220V, 110V, DC: 12V, 24V
Voltage fluctuation range: 85-110% of rated voltage
Contact capacity: 3A 250AVC COS ��=1
Environmental temperature; -5�桫+50��
Mechanical lifespan: �� 107 time
Electrical lifespan: �� 105time
Maximum counting frequency: 30Hz (duty cycle=50%)
Minimum Counting Pulse Width: 15ms
Altitude:<2000m
Power consumption: �� 5W

Dimensions (SC72a: 72 × c: 114 SC96a: 96 × b: 48 × c: 112)

SC72, SC72-6, SC96 preset counters

[electronic counter]SC11J Accumulator

2026-6-17 11:14:48

SC11J electronic accumulator, suitable for use as an accumulator component in AC 50/60Hz, AC 380V or DC voltage to DC12V circuits, with correct counting Clear display with features such as power outage maintenance function.

working principle
The SC11J accumulator adopts a large-scale CMOS circuit. The counting process is displayed by 7-segment LED. After the power is turned on, the counting signal is input from the counting terminal to start counting. When there is a power outage, the accumulator saves the current count value, and increases or decreases the previous count value when counting the next incoming call.

Technical parameters
Power supply tolerance: 85-110% of rated voltage
Counting speed: �� 100PCS, duty cycle 50%
Counting error: not greater than ± 1 count
Power consumption: AC5VA. DC5W
Maximum cumulative number: 999999
Altitude: not exceeding 2Km
Surrounding air temperature: -5 �� to+40 ��
Relative temperature:<90% (On 25 ��)
Pollution level: Pollution level 3
Installation category: Installation category

[electronic counter]SH96L Accumulator

2026-6-17 11:14:38

SH96L Accumulator

SH96L
9999m 59s
9999h 59m
99999.9m
99999.9h
99d 23h 59m
9999d 23h

Overall dimensions

SH96L Accumulator

[electronic counter]SH48L Accumulator

2026-6-17 11:14:29

SH48L Accumulator

SH48L
999m 59s
999h 59m
9999.9m
9999.9h
9d 23h 59m
999d 23h

SH48L Accumulator

[electronic counter]SK-201 digital counter

2026-6-17 11:14:21

The SK-201 digital counter can receive input signals such as switch values and level pulses, and is used in industries such as machine tools, textiles, printing, food, packaging, and complete control to record and control quantities.

Features
The digital counter is compatible with two input signals: switch quantity and level pulse
Multiple protection, isolation design, strong anti-interference ability, high reliability
A good software platform for digital counters with secondary development capabilities to meet special functions
The SK-201 digital counter can set the count value arbitrarily within the display range, and the set value and current count value will not be lost in case of power failure.

[electronic counter]AH5K series preset counter AH5K-3D,AH5K-4D,AH5K-C

2026-6-17 11:14:12

AH5K series preset counter

[electronic counter]HD48J type counter

2026-6-17 11:14:04

HD48J type counter

Name: Counter
Model: HD48J
Input: 220V
Specification: 48 �w 48
Opening: 45 �w 45

[electronic counter]LC-ELZ type digital counter

2026-6-17 11:13:55

Overview
The ELZ type LCD digital counter is paired with the LC series elliptical gear flowmeter to form an advanced on-site digital flowmeter. This counter adopts a new type of microcontroller and advanced integrated appliances, with a simple structure and easy operation. In addition to directly reading the total cumulative flow rate, single shift flow rate, and instantaneous flow rate on the flowmeter, the output frequency signal can also be linearly converted into a 4-20mA DC signal and sent to the automatic regulation system as an input signal for the regulator or to the indicator recording instrument to display the instantaneous value. This product uses a low-power microprocessor with low electrode consumption and a built-in lithium battery that can run continuously for more than three years.

Working Principle:
When the elliptical gear flowmeter is working, the low-power transmitter sends a frequency signal proportional to the flow rate, which is collected and intelligently processed by the microcontroller to calculate the single shift quantity, instantaneous quantity, and cumulative quantity, and save the data. The data is displayed on the LCD. The flow signal is converted into a regular rectangular wave through a low-power and strong anti-interference optocoupler monostable circuit, with a stable waveform width. It is then converted into a standard current analog signal 4-20mA or 1-5VDC standard voltage analog signal output through frequency voltage conversion functions and other circuits.

Features:
1. High reliability: The counter and flowmeter body form an electromechanical integrated structure, with no exposed parts, a sturdy structure, and good anti-interference performance.
2. High precision: F-V integrated conversion circuit is used, with high conversion accuracy and good linearity.
3. Intuitive display: It can display accumulated quantity, single shift quantity, and instantaneous quantity, which is convenient and has no visual error.
4. Low power consumption: Equipped with a low-power CPU and LCD display, the battery can work continuously for more than three years.
5. Easy to operate: Only one magnetic switch is needed to reset the single shift quantity to zero, and cycle to view the accumulated quantity, single shift quantity, and instantaneous quantity.

Main technical indicators:
1. Digital counter working environment temperature: -10 ��~+55 ��
2. Whole machine power consumption:<450 �� A during operation,<50 �� A during rest
3. Waterproof rating: IP54
4. Explosion proof grade: ibIIBT6
5. Display Range
Single shift quantity (can reset the highest digit display symbol "P")
P00000.00 �� P999999 liters (or cubic meters)
Instantaneous quantity (highest bit display symbol "F")
F00000.00 �� F9999999 liters/minute
Total amount (non resettable, automatic full range reset)
000000.00~99999999 liters (or cubic meters)

[electronic counter]H7ET-N time counter

2026-6-17 11:13:47

H7ET-N time counter

[electronic counter]C4S time counter

2026-6-17 11:13:39

C4S time counter

[electronic counter]BX6 series counter

2026-6-17 11:13:30

BX6 series counter

size	model	input power supply	output power supply	Input letter Number polarity	frequency response	coefficient setting	signal CP1CP2	relay output
Appearance 36 × seventy-two opening 33× sixty-nine	BX6-P	AC85- 264V or DC24V	DC12V 100mA biography feel device use	PNP	��5000HZ	zero point zero zero zero zero zero one -999999 multiplication operation	CRO-9	nothing
	BX6-N			NPN
	BX6-K2AN			NPN			CP1 reduction CP2 Plus	J1 J2
	BX6-K2AP			PNP
	BX6-K2BN			NPN			90 degree phase difference
	BX6-K2BP			PNP

BX6 series counter

[electronic counter]VX6 series intelligent counter

2026-6-17 11:13:22

size	model	input power supply	output power supply	Input letter Number polarity	frequency response	coefficient setting	signal CP1CP2	relay output
Appearance 48 × ninety-six opening forty-five × ninety-three	VX6-AN	AC85- 264V or DC24V	DC12V 100mA biography feel device use	NPN	��5000HZ	zero point zero zero zero zero one -999999 multiplication operation	90 degrees phase poor	upper limit lower limit
	VX6-AP			PNP				upper limit lower limit
	VX6-BN			NPN				nothing
	VX6-BP			PNP				nothing
	VX6-AN1			NPN			CP1 reduction CP2 Plus	upper limit lower limit
	VX6-AP1			PNP				upper limit lower limit
	VX6-BN1			NPN				nothing
	VX6-BP1			PNP				nothing
	VX6-K2AN			NPN			CP1 reduction CP2 Plus	J1 J2
	VX6-K2AP			PNP			CP1 reduction CP2 Plus
	VX6-K2BN			NPN			90 degrees phase difference
	VX6-K2BP			PNP			90 degrees phase difference

VX6 series intelligent counter

[electronic counter]FX6 series intelligent counter

2026-6-17 11:13:13

inch	model	input power supply	output power supply	Input letter Number polarity	frequency response	coefficient setting	signal CP1CP2	relay output
appearance seventy-two × seventy-two opening sixty-nine × sixty-nine	FX6-AN	AC85- 264V or DC24V	DC12V 100mA biography feel device use	NPN	��5000HZ	zero point zero zero zero zero zero one -999999 multiplication operation	90 degrees phase poor	upper limit lower limit
	FX6-AP			PNP				upper limit lower limit
	FX6-BN			NPN				nothing
	FX6-BP			PNP				nothing
	FX6-AN1			NPN			CP1 reduction CP2 Plus	upper limit lower limit
	FX6-AP1			PNP				upper limit lower limit
	FX6-BN1			NPN				nothing
	FX6-BP1			PNP				nothing
	FX6-K2AN			NPN			CP1 reduction CP2 Plus	J1 J2
	FX6-K2AP			PNP			CP1 reduction CP2 Plus
	FX6-K2BN			NPN			90 degrees phase difference
	FX6-K2BP			PNP			90 degrees phase difference

FX6 series intelligent counter

[electronic counter]GX6 series intelligent counter

2026-6-17 11:13:05

size	model	input power supply	output power supply	Input letter Number polarity	frequency response	coefficient setting	signal CP1CP2	relay output
Appearance 48 × ninety-six opening forty-five × ninety-three	GX6-AN	AC85- 264V or DC24V	DC12V 100mA biography feel device use	NPN	��5000HZ	zero point zero zero zero zero one -999999 multiplication operation	90 degrees phase poor	upper limit lower limit
	GX6-AP			PNP				upper limit lower limit
	GX6-BN			NPN				nothing
	GX6-BP			PNP				nothing
	GX6-AN1			NPN			CP1 reduction CP2 Plus	upper limit lower limit
	GX6-AP1			PNP				upper limit lower limit
	GX6-BN1			NPN				nothing
	GX6-BP1			PNP				nothing
	GX6-K2AN			NPN			CP1 reduction CP2 Plus	J1 J2
	GX6-K2AP			PNP			CP1 reduction CP2 Plus
	GX6-K2BN			NPN			90 degrees phase difference
	GX6-K2BP			PNP			90 degrees phase difference

GX6 series intelligent counter

[electronic counter]GSJ series photoelectric counter

2026-6-17 11:12:54

The GSJ series photoelectric counter products can be equipped with MR-10XA or CY-22 photoelectric sensors, suitable for counting in cardboard boxes, printing equipment, or other production lines

model	GSJ-5021
Overall dimensions	60120135
cutout size	55*115
display digits	5 people
Power-off memory	nothing
power supply	AC220V or DC24V

GSJ series photoelectric counter

[electronic counter]AS6 Counter

2026-6-17 11:12:45

The AS6 counter adopts imported component switch power supply, with strong anti-interference and stable counting. MR-10XA or CY-22 photoelectric sensors can be selected, and it is also suitable for various proximity switches, Hall sensors, etc. It is widely used in various industries.

model	AS6
Overall dimensions	584070
cutout size	51*26
display digits	6 people
Power-off memory	have

[electronic counter]GS6 Counter

2026-6-17 11:12:37

The GS6 counter adopts imported component switch power supply, with strong anti-interference and stable counting. MR-10XA or CY-22 photoelectric sensors can be selected, and it is also suitable for various proximity switches, Hall sensors, etc. It is widely used in various industries.

model	GS6
Overall dimensions	964882
cutout size	92*44
display digits	6 people
Power-off memory	have

GS6 counter

[electronic counter]GS4/GS5 Counter

2026-6-17 11:12:29

The GS4/GS5 counter adopts imported component switch power supply, with strong anti-interference and stable counting. MR-10XA or CY-22 photoelectric sensors can be selected, and it is also suitable for various proximity switches, Hall sensors, etc. It is widely used in various industries.

model	GS4	GS5
Overall dimensions	9648112	9648112
cutout size	92*44	92*44
display digits	4 people	5 people
Power-off memory	nothing	nothing

GS4/GS5 counters

[electronic counter]JK-48,JK-72 Intelligent Counting Speed Timer

2026-6-17 11:12:20

JK-48, JK-72 Intelligent Counting Speed Timer

Intelligent counting, speed, timer

Model: JK-48 JK-72

Display mode: LED
Measurement range: 1. 0-99999999
2. 0.01 seconds to 9999 days, 23 hours, 59 minutes, and 59 seconds
3��60-1000RPM

Input signals: contact signal and pulse signal
Control mode: relay
Contact load: AC250V 3A DC24V 5A
Working power supply: AC220V, AC110V, AC24V, DC12V
Auxiliary output power supply: 12V
Working temperature: 0-+50 degrees (relative humidity 45% -75%)
Anti interference capability: IEC801 3G
Panel size: 48mm × 48mm 72mm × 72mm
Hole size: 45mm × 45mm 68mm × 68mm

Features:
32 optional functions, magnification setting, and meter counting capability

[electronic counter]TCN-61A Semi intelligent counter

2026-6-17 11:12:12

TCN-61A Semi Intelligent Counter

Semi intelligent counter

Model: TCN-61A

Display mode: LED
Counting range: 0-999999
Input signals: contact signal and pulse signal
Control mode: relay
Contact load: AC250V 3A DC24V 5A
Working power supply: AC220V, AC110V, AC24V, DC12V
Auxiliary output power supply: 12V
Working temperature: 0-+50 degrees (relative humidity 45% -75%)
Anti interference capability: IEC801 3G
Panel size: 72mm × 72mm
Hole size: 68mm × 68mm

Features:
Counting speed optional, four output modes optional

[electronic counter]GP3-CT Panel Counter

2026-6-17 11:12:03

Panel counter

Model: GP3-CT

Display mode: LED
Counting range: 0-99999
Input signal: Contact signal
Counting frequency: 0-1000Hz
Panel size: 79mm × 43mm
Hole size: 75mm × 40mm
Operating environment temperature: 0-40 degrees Celsius

Features:
One meter is versatile, capable of counting, frequency, and speed
Easy to use, with timing function (ordering)

[electronic counter]H7EC-BLM LCD electronic counter

2026-6-17 11:11:54

H7EC-BLM LCD electronic counter

Model: H7EC-BLM, BV

Display mode: LCD
Counting range: 0-999999
Input signal: Contact signal and voltage signal (DC4-24V AC110-20V) optional
Word height: 6.7mm
Counting speed: 10/second
Panel size: 48mm × 24mm
Hole size: 22.5mm × 45mm
Operating environment temperature: 0-40 degrees Celsius

Features:
Built in lithium battery, with a standby life of up to 5 years. Both the panel and terminals can be reset
The H7EC-BLM LCD electronic counter is easy to use and has a timer function.

[electronic counter]H7EC-8 LCD electronic counter

2026-6-17 11:11:45

H7EC-8 LCD electronic counter

Model: H7EC-8

Display mode: LCD
Counting range: 0-99999999
Input signal: Contact signal and voltage signal (DC4-24V AC110-20V) optional
Word height: 6.7mm
Counting speed: 10/second
Panel size: 48mm × 24mm
Hole size: 22.5mm × 45mm
Operating environment temperature: 0-40 degrees Celsius

Features:
Built in lithium battery, with a standby life of up to 5 years. Both the panel and terminals can be reset

The H7EC-8 LCD electronic counter is easy to use and has a timer function.

[electronic counter]HB726J Intelligent multi setting counter/grating table

2026-6-17 11:11:36

HB726J intelligent multi setting counter/grating table

1-4 control values, 1-4 relay outputs
Press the button to directly add or subtract six set values, making it convenient and fast to set
Adapt to proximity switches, contact switches, photoelectric switches, encoders, etc
Super anti-interference design, stable operation, accurate counting

HB726J Intelligent Multi Setting Counter/Grating Table Technical Parameters
1. Power supply: AC/DC85-260V (other voltages can be customized)
2. Pulse level: 30KHz (grating table 15KHz)
3. Trigger mode: Low level: -50V~+0.5V;
High level:+4V to+50V
4. Measurement range: 0-10KHz
5. Display value: input value x magnification SCL
6. Ratio CSL: 0.0001 to 99.9999
7. Contact capacity: AC250V/3A; DC24V/5A
8. Contact life: 105 times
9. Data storage: EEPROM for 10 years
10. Dimensions: 72 × 72 × 115mm
11. Hole size: 67 × 67mm
12. Operating environment: 0-50 ��; �� 85%RH

[electronic counter]HB96J/HB96G Counter/Grating Table

2026-6-17 11:11:28

HB96J/HB96G Counter/Grating Table

Two control values can be set, with two independent relay outputs
Suitable for various proximity switches, contact switches, photoelectric switches, encoders, etc
Super anti-interference design, stable operation, accurate counting, adaptable to various harsh environments

HB96J/HB96G Counter/Grating Table Technical Parameters
1. Power supply: AC220V ± 15% 50HZ (other voltages can be customized)
2. Counting range: -199999 to 999999
3. Counting frequency: HB96J: 2-30KHz; HB96G:2��15KHz
4. Pulse level: Low level: -50V~+0.5V; High level:+4V to+50V
5. Trigger method: Low level trigger (switch contact falling edge trigger)
6. Instrument display value: input value x magnification
7. Magnification range: 0.001 to 65.535
8. Contact capacity: AC250V/3A; DC24V/5A
9. Contact life: 105 times
10. Feed output: DC12V, DC5V, DC30mA
11. Dimensions: 96 × 48 × 112mm
12. Hole size: 92 × 44mm
13. Operating environment: 0-50 ��, �� 85% RH

HB96J/HB96G Counter/Grating Meter Model Description

HB96J/HB96G Counter/Grating Table

[electronic counter]HB484J/HB724J Intelligent dual digital counter/grating meter

2026-6-17 11:11:19

HB484J/HB724J Intelligent Dual Digital Counter/Grating Meter

HB484/HB724 adopts international standard chassis, with a curved front panel and a large display screen. The display screen material is purple high filter transparent glass, exquisite and elegant, combining art and modern technology.

HB484J/HB724J intelligent dual digital counter/grating meter can achieve reversible counting, up/down counting, and recognizable phase counting functions
Can be equipped with various proximity switches, photoelectric switches, rotary encoders, etc
Set the counting multiplier arbitrarily, the current count value and the set count value will not be lost in case of power failure
Multiple relay output modes are available for selection, fully meeting the needs of the control site

HB484J/HB724J Intelligent Dual Digital Counter/Grating Meter Technical Parameters
1. Working power supply: AC/DC85-260V (other voltages can be customized)
2. Display range: 0-9999
3. Measurement frequency: 0-5000Hz
4. Trigger method: Low level trigger (switch contact falling edge trigger)
5. Instrument display value: input value x A magnification ÷ B magnification+initial value C
6. Magnification A: 1 to 9999
7. Magnification B: 1 to 9999
8. Initial value C: 0 to 9999
9. Feed output: DC9V/30mA
10. Contact capacity: AC250V/3A (resistive load)
11. Contact life: 105 times
12. Dimensions: HB484:48 × 48 × 82mm HB724:72 × 72 × 62mm
13. Hole size: HB484:45 × 45mm HB724:67 × 67mm
14. Operating environment: 0-50 ��, �� 85% RH

[electronic counter]HB48P/HB72P Intelligent Dual Digital Batch Counter

2026-6-17 11:11:11

HB48P/HB72P Intelligent Dual Digital Batch Counter

1�� Characteristics

The upper row displays the batch count or total cumulative value
The lower row displays the current count value
Press the button to set the instrument parameters, and the ratio coefficient can be set
Especially suitable for quantitative packaging counting

2�� Technical parameters
1. Working power supply: AC/DC85-260V (other power supplies can be customized)
2. Counting speed: 1000 times/second

3. Pulse level: Low level: -30V~0.5V; High level: 4V~30V
4. Trigger method: Low level trigger (switch contact falling edge trigger)
5. Counting range: 0-9999
6. Display mode: HB48P: 0.36-inch LED
HB72P: 0.56-inch LED
7. Contact output: One relay normally open and normally closed output
8. Dimensions: HB48P: 48 × 48 × 85
HB72P��72×72×112 mm
9. Hole size: HB48P: 44 × 44mm
HB72P��68×68 mm
10. Operating environment: 0-50 ��; ��85%RH

3�� Model Description

HB48P/HB72P Intelligent Dual Digital Batch Counter

[electronic counter]JS48 series microcomputer counter

2026-6-17 11:11:02

JS48 series microcomputer counter external dimensions: 96 * 48 * 113mm opening dimensions: 92 * 44mm
JS48-4 four bit counter
JS48-6 six bit counter

A counter is a multi-purpose intelligent instrument designed with a microcontroller, equipped with power-off data protection, strong anti-interference and other functions

[electronic counter]LCD display electronic counter

2026-6-17 11:10:54

Product Name: EA108 LCD Electronic Counter
Working principle and introduction: The EA108 LCD electronic counter adopts a newly designed electronic counter housing, an 8-bit LCD digital display, and zero blanking function for more than one bit. It has strong anti-interference ability and is easy to use. The EA108 LCD electronic counter can be driven by voltage pulses, proximity switches, shaft encoders, mechanical shocks, or switch signals to count. If the power supply is interrupted, the recorded values are stored in EEPROM (memory), which can store the recorded data for at least ten years without power supply. When the power supply is restored, the counting can continue without loss.

Technical parameters of EA108 LCD electronic counter:

display	8-bit LCD
character height	7 millimeters
power supply voltage	DC 12~24V
power consumption	��1.5W
data saving	10 years
Maximum counting frequency	100Hz
counting method	Increase and then decrease
Signal duty cycle	1��1
Working environment temperature	-10��~+55��
Storage environment temperature	-20��~+70��
External reset	manual and automatic

EA108 LCD display electronic counter

[electronic counter]711A electronic pre selection counter

2026-6-17 11:10:45

Working principle and introduction: The 711A pre selection electronic counter is the latest counter developed by our company for the Chinese market based on the 711 pre selection electronic counter from Huntsler, Germany. It uses highly integrated surface mount components, occupies small space, has strong counting function, and can be driven by signals such as voltage pulses, proximity switches, photoelectric switches, shaft encoders, or mechanical contact switches for counting. The counting frequency is high. This counter can be reset by both the front panel and external electrical signals, making it easy to use. Its unique internal memory can store the count value for ten years without the need for batteries after power failure or shutdown. 6-digit red digital tube (LED) display, high clarity, easy identification, not easily affected by temperature and light, can be used for intermittent zeroing counting work, such as statistical counting, mechanical rotation, currency counting, flow counting, group selection counting, etc. It is widely used in industries such as packaging, spinning, machinery, printing and dyeing.

Product series and related technical parameters:

model	711A-P-DC	711A-P-AC	711A-N-DC	711A-N-AC
display	6-digit red LED display with a height of 7mm
Voltage (fluctuation range: ± 10%)	DC��12 V��24V	AC��165 V��265V	DC��12 V��24V	AC��165 V��265V
power	2W
data retention	10 years
input impedance	22k��
Threshold voltage	High level �� 8 V, low level �� 2 V
Extreme voltage	Positive and negative 40V
Count (reset) signal frequency	30Hz or 5kHz, can be set through programming switches
Counting signal triggering method	Right along	Right along	Negative edge	Negative edge
Minimum pulse width	17ms or 100 �� s, can be set through programming switches
Signal output mode	relay output
Signal output time	Minimum 50ms, approximately 1s in the middle, can be set to steady state
load capacity	50VA�� Maximum voltage AC: 250V; DC��30V, Maximum current 2A
duty cycle	1��1
protection level	Level 2
Front panel protection	IP54��DIN40050
Rear panel protection	IP00��DIN40050
anti-interference capability	Level 2 (IEC801)
Operating Temperature	-10��~+50��
Storage temperature	-20��~+70��

Product installation dimension diagram:

711A electronic pre selection counter

[electronic counter]XY-980-D type (cutting machine) electronic counter

2026-6-17 11:10:37

XY-980-D electronic counter (cutting machine)

[electronic counter]XY-20Z electronic counter

2026-6-17 11:10:28

XY-20Z electronic counter

[electronic counter]JDM-6H electronic counter

2026-6-17 11:10:19

JDM-6H electronic counter

[electronic counter]JDM11-5H electronic counter

2026-6-17 11:10:09

JDM11-5H electronic counter

[electronic counter]732 electronic counter

2026-6-17 11:10:01

Working principle and introduction:

The 732 electronic counter can be used as a pre selection counter, batch counter, pulse counter, tachometer, and timer. Widely used in packaging, ingredients, printing, petroleum, chemical, power generation, machine tools, instruments, automation control, etc.

Technical parameters of 732 electronic counter:

display	LED or LCD, 6-digit
Data height	LED 7.6mm, LCD 9mm
power supply voltage	12... 24VCD or 24VAC; 100VAC�� 115VAC��230VAC�� 50/60Hz
tolerance	±10%
current consumption	12...24VDC<150mA��24VAC<250mA��100/115/230VAC<50mA
data saving	More than ten years
electrical connection	Screw terminal
Pulse shape	Arbitrary (1:1 square wave, maximum frequency)
input resistance	Approximately 10 thousand euros (static)
Counting frequency	Maximum 5 kHz (2.5 kHz bidirectional)
Operating Temperature	0��~+50��
Storage temperature	-20��~+60��
protection level	Front IP (EN60529)

732 electronic counter

[electronic counter]731 electronic counter

2026-6-17 11:09:52

Working principle and introduction:

The 731 electronic counter can be used as an accumulation counter, tachometer, timer, and positioning indicator. Widely used in fields such as printing, packaging, textiles, machine tools, elevators, etc.

Product series and related technical parameters:

power supply	12~24VDC�� +20/-10%
current	<150mA��LED�� <50mA��LCD��
data saving	more than 10 years
display	LED 6 bits, word height 7.6mm, LCD 8 bits, word height 7mm
pulse width	Minimum 70 microseconds (7.5 kHz) or 15 milliseconds (30 Hz)
Counting frequency	High "7.5 kHz or" Low "30 Hz
Front dimensions	DIN48mm * 24mm
panel thickness	Maximum 26 millimeters
Product depth	60 millimeters
Operating Temperature	Front IP54
Storage temperature	-10��~+50�棬-20��~+60��

Installation dimension diagram of 731 electronic counter:

731 electronic counter

[electronic counter]722 type five digit electron rate counter

2026-6-17 11:09:44

Working principle and introduction:
It has five digit display, ratio display, ratio output function, programmable setting function, and upper/lower limit control function. Strong adaptability of electrical appliances, equipped with sensor power supply, no need for batteries, data can be saved for ten years. The 722 series rate electronic counter can handle both fast and slow pulse sequence processes, and is suitable for various situations that require measurement and display of time related variables. It comes with models with limited values, as well as functions for numerical comparison and output signals. Applied to speed control systems and power generation systems for automated assembly lines.

Product series and related technical parameters:

model	0 722 101	0 722 102
display	5-digit red LED display word height 14mm
Voltage (fluctuation range: ± 10%)	DC��12V��24V	AC��100 V��240V
power	2W
data retention	10 years
input impedance	5k��
Threshold voltage	High level �� 8 V, low level �� 2 V
Extreme voltage	Positive and negative 40V
Test frequency range	Minimum: 1 time/minute; Maximum: 10000 times/minute
Count (reset) signal frequency	30Hz or 10kHz, can be set through programming switches
Counting signal triggering method	Right along
Minimum pulse width	17ms or 50 �� s, can be set through programming switches
Ratio setting range	0.001-9.999
Signal output mode	relay output
load capacity	AC��250V,1A; DC��50V,1A
duty cycle	1��1
protection level	Level 2
Front panel protection	IP54��DIN40050
Rear panel protection	IP00��DIN40050
anti-interference capability	Level 2 (IEC801)
Operating Temperature	-10��~+50��
Storage temperature	-20��~+70��

Product installation dimension diagram:

722 type five digit electron rate counter

[electronic counter]EN_1 type accumulative counter

2026-6-17 11:09:35

Technical parameters of 710D LED accumulator counter:

display	6-digit red LED display
character height	7 millimeters
power supply voltage	AC220V��70%~110%��DC12V~24V
power consumption	��1W
counting method	increasing
Counting frequency	5 times/second (~200 times/second)
Counting pulses	DC (5-40V); AC 220V communication; No voltage
input impedance	2k euros; 200k ohms at AC220V
Reset signal holding time	>150ms
installation dimensions	402060��mm��
data saving	a decade

710D LED accumulator counter

[electronic counter]710B001 type electronic accumulator counter

2026-6-17 11:09:26

Working principle and introduction:
The 710B001 electronic accumulator counter is an 8-bit LCD display with EL backlight, which has strong anti-interference ability and is easy to use. The 8-bit LCD digital display has zero blanking function for more than one digit, and the counter can be driven by voltage pulses, proximity switches, shaft encoders, mechanical shock or switch signals to count.

Data saving:
If the power supply is interrupted, the recorded values are stored in EEPROM (memory), which can store the recorded data for at least ten years without power supply. When the power supply is restored, the counting can continue without loss.

Technical parameters of 710B001 electronic accumulator counter:

display	8-bit LCD
character height	7 millimeters
lighting	EL backlight
power supply voltage	12-24V DC
power consumption	��1.5VA
data saving	10 years
Maximum counting frequency	500Hz
counting method	increasing
Signal duty cycle	1��1
Trigger method	Input impedance 22K ohms, anti-interference ability IEC801, Level 3 positive edge trigger
Operating Temperature	0��~+50��
Storage temperature	-10��~+60��

710B001 electronic accumulator counter

[electronic counter]710A type electronic accumulator counter

2026-6-17 11:09:17

Working principle and introduction:
The 710A type cumulative electronic counter is the latest counter developed by our company for the Chinese market based on the 710 type cumulative electronic counter from Henssler, Germany. It uses highly integrated surface mount components, occupies a small space, and has strong counting function. It can be driven by signals such as voltage pulses, proximity switches, photoelectric switches, shaft encoders, or mechanical contact switches, and has a high counting frequency. This counter can be reset by both the front panel and external electrical signals, making it easy to use. Its unique internal memory can store the count value for ten years without the need for batteries after power failure or shutdown. 6-digit red digital tube (LED) display, high clarity, easy identification, not easily affected by temperature and light, can be used for intermittent zeroing counting work, such as statistical counting, mechanical rotation, currency counting, flow counting, group selection counting, etc. It is widely used in industries such as packaging, spinning, machinery, printing and dyeing.

710A Electronic Accumulator Counter Series and Related Technical Parameters:

model	710A-P-L	710A-P-H	710A-N-L	710A-N-H
display	6-digit red LED display with a height of 7mm
Voltage (fluctuation range: ± 10%)	DC��12V��24VDC±10%
power	1.5W
data retention	10 years
input impedance	22k��
Threshold voltage	High level �� 8 V, low level �� 2 V
Extreme voltage	Positive and negative 40V
Count (reset) signal frequency	30Hz	5kHz	30Hz	5kHz
Counting (reset) signal triggering method	Right along	Right along	Negative edge	Negative edge
Minimum pulse width	17ms	100��s	17ms	100��s
duty cycle	1��1
protection level	Level 2
Front panel protection	IP54��DIN40050
Rear panel protection	IP00��DIN40050
anti-interference capability	Level 2 (IEC801)
Operating Temperature	-10��~+50��
Storage temperature	-20��~+70��

Product installation dimension diagram:

710A electronic accumulator counter

[electronic counter]DHC3J Series Accumulator

2026-6-17 11:09:09

DHC3J series accumulator

[electronic counter]67 type automatic carry up counter

2026-6-17 11:09:00

The 67 type automatic carry up counter is a mechanical driven automatic carry up counter, suitable for counting applications in general punching machines, printing machines, and other machinery.

Count range: 0-9999.
The pull rod jumps one number at a time and automatically carries forward.
Rotate the character axis in the forward direction, and all numbers will return to zero.
The internal letter wheel system of this 67 type automatic carry up counter is made of special plastic, and should not come into contact with toluene, thinner, etc. during disassembly and cleaning. Just add a little engine oil.

[electronic counter]JY20Z type digital counter

2026-6-17 11:08:52

JY20Z digital counter

[electronic counter]JDM9 series digital preset counter

2026-6-17 11:08:43

JDM9 series digital preset counter

[electronic counter]JDM11 series digital counter

2026-6-17 11:08:34

JDM11 series digital counter

[electronic counter]SC3J type cumulative counter

2026-6-17 11:08:23

The SC3J ultra small accumulator has the advantages of small size, high counting accuracy, and built-in power supply, making it suitable for the field of high-tech technical schools and high-precision medical devices.

DIN48 × 24mm standard panel size
Internal built-in power supply, no need for external connection
Accurately accumulated number
6-digit LCD display, large and clear display
Panel reset with lock to prevent misoperation
Maximum cumulative number 999999 days
No mechanical wear and tear, long lifespan
Maximum residual voltage input: 0.5V
Minimum signal pulse width: �� 0.02S
Weight: Approximately 60 grams
Hole size: 22.2 × 45mm
Reset method: panel button reset, external terminal reset
Operating environment temperature: -10 ��~40 ��

Overall dimensions:

SC3J type cumulative counter

[electronic counter]JSL1 series digital cumulative timer

2026-6-17 11:08:14

The JSL1 series digital cumulative timer has the characteristics of small size, high accuracy, easy use, and long data retention time. It is suitable as a time control component in control circuits with AC 50/60Hz, voltage up to 380V or DC voltage up to 24V, and is used for timing and display under various random intermittent working conditions. The product complies with GB14048 standard.

model	JSL1
Classification	Digital cumulative timer
Specifications and varieties	Accumulated timing, 4-digit, 5-digit display (with reset and pause)
Delay range	0.15-9999h
Delay range	0.15-99999h
Contact type	--
contact capacity	--
Electrical lifespan (AC-12)	--
characteristic	Specialized microcontroller circuit, E2PROM technology for storing data
Product Certification	CCC application in progress

JSL1 series digital cumulative timer specifications and varieties

model	Timing range	rated voltage
JSL1-40	0-999.9s 0-9999s 0-9999min 0-9999h	AC110,220,380V 50/60Hz DC24V
JSL1-5S	0-99999s
JSL1-5M	0-99999min
JSL1-5H	0-99999h

Technical parameters of JSL1 series digital cumulative timer

Timing error	��0.2%
Voltage fluctuation error	��0.2%
temperature error	��0.5%
Effective power-off time	��0.5s
Data retention time	10 years
External reset time	��1s
Insulation strength	Electrical and earth: AC2000V 1min Electrical circuit: AC1500V 1min
insulation resistance	> 100M��
Rated power consumption	About 2VA

Overall dimensions

JSL1 series digital cumulative timer

[electronic counter]JDM72 series electronic counting relay

2026-6-17 11:08:05

The JDM72 series electronic counting relay is suitable as a counting element in automatic control circuits with AC 50/60Hz, voltage up to 380V or DC up to 48V, and can be connected or disconnected according to preset numbers. The product has correct counting. Strong anti-interference ability, clear LED display and other features, with power-off maintenance function. The external dimensions are 72 × 72, suitable for panel installation.

model	JDM72
Type and specification	Incremental/decremental counting with power outage hold function
counting range	0-9999, 0-9999999
Counting input method	Contact signal, pulse voltage, pulse level
Contact type	SPDT
contact capacity	5A AC220V (resistive load res.load)
Electrical lifespan (AC-12)	1×105
characteristic	Single or double row display, dedicated built-in E2PROM technology for data storage, preset number locking, reversible counting.
Product Certification	CCC application in progress

Specifications and varieties

model	counting range	display mode	rated voltage
JDM72-S	0-9999	Single row LED	AC24,36,48,110,127, 220,380V DC24,48V
JDM72-D	0-9999	Double row LED	AC24,36,48,110,127, 220,380V DC24,48V

Technical data

Calculate the highest frequency	30cps
Pulse voltage input, pulse amplitude, pulse width, pulse period	Vpp��12V��Ip��3mA T�ӡ�10ms Tc��33ms
Pulse level input	Upp��6V��Ip��200mA

Number of contact points	1 Conversion
contact capacity	AC220V 5A (resistive load Res. load)
External reset time	��50ms
Rated power consumption	AC��2VA DC��1W
Insulation strength	AC1500V 1min (AC750V 1min between contacts in the same group)
mechanical life	1×106
electrical life	1×105

JDM72 series electronic counting relay

[electronic counter]JDM24 series electronic counting relay

2026-6-17 11:07:56

The JDM24 series electronic counting relay is suitable as a counting element in automatic control circuits with passive and active AC 50/60Hz, voltage up to 380V or DC voltage up to 48V. The product complies with the GB14048 standard, with features such as accurate counting and clear display. It has a power-off hold function and has an external size of 48 × 48. The installation method is panel type, with two sizes suitable for different installation scenarios.

model	JDM24
Type and specification	Basic type (incremental counting), level controlled reversible counting, 90 ° phase controlled reversible counting, with power-off holding function
counting range	0-999999
Counting input method	Contact signal, pulse voltage
Contact type	--
contact capacity	--
Electrical lifespan (AC-12)	1×106
characteristic	6-digit LCD display, multiple counting input methods, can hold data for up to five years.
Product Certification	CCC application in progress

JDM24 series electronic counting relay specifications and varieties

model	counting range	Signal input voltage
JDM24-6H	0-999999	AC24,36,48,110,220,380V DC24,48V
JDM24-6L

JDM24-6HS
JDM24-6LS
JDM24-6HX
JDM24-6LX
JDM24-6HW	0-999999	Passive mechanical contact input
JDM24-6LW
JDM24-6HSW
JDM24-6LSW
JDM24-6HXW
JDM24-6LXW

Technical data

Working type: Active: AC 24V-380V, DC 24-48V voltage signal input. Multiple specifications available for passive input: contact signal input.

Pulse signal: L-type: low speed, pulse is a square wave with a pulse width of not less than 15ms. H-type: high speed, pulse is a square wave with a pulse width of not less than 1ms

Counting error	No more than ± 1 count
reset to zero	External reset, manual reset (reset signal time 20ms)
electrical life	1×106

JDM24 series electronic counting relay external dimensions and installation dimensions

[electronic counter]JDM12 series electronic counting relay

2026-6-17 11:07:48

The JDM12 series electronic counting relay is suitable as a counting element in automatic control circuits with AC 50/60Hz, voltage up to 380V or DC voltage up to 48V, and can be connected or disconnected according to preset trees. The product complies with the GB14048 standard, with features such as correct counting and clear display. It has a power-off hold function and has an external size of 48 × 48. The installation method is plug-in, which can be used for panel installation, device installation, and rail installation.

model	JDM12
Type and specification	Incremental/decremental counting with power outage hold function
counting range	0-9999
Counting input method	Contact signal, pulse voltage, pulse level
Contact type	SPDT
contact capacity	5A AC220V (resistive load res.load)
Electrical lifespan (AC-12)	2×105
characteristic	LED display, multiple input methods, with power-off hold function.
Product Certification	CCC application in progress

Specifications and varieties

model	counting range	Setting method	rated voltage
JDM12-2	0-99	Finger wheel switch	AC24,36,48,110, 127,220,380V DC24,48V
JDM12-2H
JDM12-4	0-9999
JDM12-4H

Technical data

A: Contact signal input: Counting frequency up to 25cps

B: Pulse voltage input: Pulse amplitude: Vpp �� 24V, Ip �� 10mA Pulse width: T �� 10ms Pulse period: Tc �� 40ms

C: Pulse level input: Vpp=6V, Ip �� 200 µ A

Counting error	No more than ± 1 count
Number of contact points	1 Conversion
contact capacity	AC220V 5A resistive load Res.load
power consumption	3W��3VA
mechanical life	1×106
electrical life	2×105

JDM12 series electronic counting relay

[electronic counter]721 type dual preset electronic counter

2026-6-17 11:07:39

The 721 dual preset electronic counter is widely used in mechanical equipment such as automatic packaging machinery, batching devices, elevators, mine detection vehicles, cable cutting machines, stamping machines, etc. 5-digit LED display, screw connection, ratio display, multiple programming methods, German industrial standard size.

1. Ratable display:
The counting pulse input of the 721 type dual preset counter can be converted into a ratio of 0.001~9.999 and displayed through a multiplier. Only display integers, keep the remainder inside, and count values (count pulse * ratio coefficient) that do not exceed the frequency of the maximum count. Output an identical signal source while displaying the ratio.
2. Counting output:
The counting output can be set to an up or down counting mode, and the counting frequency can be set to 5KHz or 30Hz according to the conditions.

3. Counting output:
Depending on the model, the 721 has one or two relay or transistor outputs, and the signal delay time at the output end ranges from 0.05 seconds to steady state, which can be adjusted arbitrarily.

4. Status settings:
The 721 type counter can be set in state through the DIL switch.

Technical parameters of 721 type dual preset electronic counter:

character height	7mm
rated voltage	DC12-24V��AC100-240V
encoder power supply	AC type 24VDC, DC type Vop-2V, maximum current of about 60mA
data saving	10 years
Operating Temperature	-10�桪+50��
Storage temperature	-20�桪+70��
Anti interference level	Level 3 (IEC801)
quality	200g
Minimum pulse width	>100us/17ms (according to counter frequency)
Counting frequency	5KHz/30Hz
Counting signal amplitude	High level �� 8V Low level �� 2V Maximum ± 40V
input resistance	22K
Pulse shape	Square wave of any frequency
reset	Steady state pulse width>15ms
Maximum switch voltage	250VAC/30VDC

Installation dimension diagram of 721 type dual preset electronic counter:

721 type dual preset electronic counter

[electronic counter]711 type preset counter

2026-6-17 11:07:31

The 711 preset counter is based on the latest manufactured integrated circuits, with highly integrated circuit components and a keyboard design that meets international standards, making it easy and safe to use; The AC power supply unit also provides a 24VDC/60mA power supply for the electronic pulse generator, with a six digit digital display and zero blanking function. Applied to packaging machinery and printing machinery.
711-400 relay output, negative edge triggered counter
711-410 relay output, positive edge triggers counter
711-424 transistor output, negative edge triggered counter
711-427 transistor output, positive edge trigger counter

Schematic diagram of programming switch:

Product series and related technical parameters:

function		Programming switch
function		S1	S2	S3	S4	S5	S6	S7
Reset input	low frequency	left
Reset input	high frequency	right
Counting pulse input	low frequency		left
Counting pulse input	High lock		right
Pre input	lock			left
Pre input	gating			right
automatic loop	is				left
automatic loop	No				right
Work mode input	set					left
Work mode input	reset					right
counting method	decrease						left
counting method	increasing						right
Keyboard reset	lock							left
Keyboard reset	gating							right

counter
display	7-segment red LED display
digit	6 people
character height	7mm
power supply voltage	12-24VDC ± 10%, 220VAC (with power pack)
power consumption	VOP=12V��Imax=120mA
External fuse	250mA
data saving	About 10 years

Counting pulse and reset pulse
input impedance	22K
Threshold voltage	High level>=8V, low level<=2V
Permission input voltage	Positive and negative 40V
Trigger along	Positive or negative edge (depending on the model)
Extreme counting frequency	5KHz�� 30Hz during plastic surgery
Minimum pulse period	100us�� 17ms during plastic surgery

output
relay output	The minimum signal cycle is 50ms
	Adjustable or bistable
	Contact load 50VA
Transistor output	About 50ms or set as bistable
	Switching voltage VOP/0V
	Maximum switch current 40mA

other
protection level	Level 2
Front panel protection	IP 54��DIN 40050
Plug in protection	IP 00��DIN 40050
Safety Instructions	VDE 0411
anti-interference capability	IEC 801�� Level 3
Operating Temperature	-10 degrees to+50 degrees
Storage temperature	-20 degrees to+70 degrees

Installation dimension diagram:

711 type preset counter

[electronic counter]710 type accumulation counter

2026-6-17 11:07:22

The 710 type accumulator counter has strong anti-interference ability and is easy to use. 6-digit red digital display with zero blanking function. The counter can be driven by voltage pulses, proximity switches, photoelectric switches, shaft encoders, or mechanical shock switch signals to count.
If the power supply is interrupted, the recorded values will be stored in a permanent memory (NVRAM), which can hold the recorded data for at least one year under five power conditions. Therefore, when the power is restored, counting can continue with partial loss.

Technical parameters of 710 type accumulator counter:

character height	7mm
rated voltage	DC12-24V ± 10% AC220V ± 10% (with power pack)
power consumption	120mA
data saving	�� 1 year
counting method	incremental
Maximum counting frequency	Set to 30Hz or 5KHz according to the application settings
Minimum Counting Pulse Width	100us
Trigger method	Positive and negative edges can be set as needed
pulse mode	arbitrary
Threshold voltage amplitude	Low level �� 2V High level �� 8V
maximum extent	±40V
input impedance	15 euros
control input	Suppression gate/reset
Prohibit signal holding time	>100ms
Zero signal holding time	>250ms
Operating Temperature	-10�桪+50��
Storage temperature	-20�桪+70��
Protection category	Front IP40, rear IP100
anti-interference capability	Interference intensity level 2
Installation method	Plug in (400 module series)
quality	About 57g

Counting and reset signals		Input signal frequency
Positive edge trigger	Negative edge trigger	5KHz	30Hz	Order Number
��		��		0710403
��			��	0710404
	��	��		0710413
	��		��	0710423

Product installation dimension diagram:

710 type accumulator counter

[street light controller]AS10 Street light control automatic switch

2026-6-17 10:56:32

AS10 street light control automatic switch is suitable for general factory, school, street lights, and navigation beacon lights on water and islands. During the day, the on duty personnel turn off the lights, and when it gets dark, they turn on the lights. Often leads to failure to turn on or off lights in a timely manner. This not only wastes electricity, but also affects work.
During the day, the light is strong and the photosensitive element releases the relay, causing the street lamp to not light up; When it gets dark to a certain extent in the evening, the photosensitive element activates the switch until it is turned off the next morning, and this cycle continues;

Power supply voltage: 220V, human, load current 10A,
Control resistive bulbs to below 2000 watts, and fluorescent lamps and other inductive lamps to below 300 watts

[street light controller]SDK-9 latitude and longitude intelligent street light controller

2026-6-17 10:56:23

The SDK-9 intelligent street lamp controller adopts the most advanced computer control technology from abroad, using the operating laws of the sun and the earth, as well as the relationship between the earth's longitude and latitude and sunrise and sunset. Based on the seasonal changes, the longitude and latitude algorithm is applied to calculate the sunrise and sunset time. It also has the functions of fine adjustment of switch time and midnight control, which can adapt to the needs of different geographical environments. It is the best time controller for street lamps, advertising light boxes, neon lights and other equipment; It can be widely used in all places that require time control, such as streets, railways, waterways, industrial and mining areas, schools, and power supply departments.

Features
1. Adopting advanced foreign microprocessor chips, high reliability, small error, and strong stability.
2. With power-off data protection, the clock works continuously without the need to replace the battery, maintaining the clock's operation for more than ten years.
Group 0 working mode: The lighting time can be set by the user, ranging from 00:00 to 23:59; The turning off time can be set by the user, ranging from 00:00 to 23:59. The switch time is the same in the same month, but different switch times can be set for different months.
4. One set of all night working mode: Control the on/off time according to latitude and longitude, and adjust it reasonably with seasonal changes. The on/off light time is automatically adjusted every day, and there is a fine adjustment function for the on/off time, ranging from -50 to 50. Turn on/off the light in the negative direction in advance and delay it in the positive direction.
5. One set of midnight working mode: Control the turning on time according to latitude and longitude, and the turning off time can be set by the user, ranging from 00:00 to 23:59, which can effectively save energy.
�� It has automatic/manual conversion, which is convenient for the maintenance of electrical equipment or the needs of major celebrations.
Strong anti-interference ability, high-power relay output, can be connected to 220V or 380V contactors, with a long service life.

technical parameters
Working voltage: 220V ± 30%
Working frequency: 50Hz
Working temperature: -40 ��~+70 ��
Output current: 10A
Whole machine power consumption: 1W
Timing error: 30s/year
Control interval: 24 hours
Minimum step size: 1 minute
Number of time periods: 0 groups, 1 month, 1 group, adjusted daily
Working mode: 0 sets of user settings, 1 set of latitude and longitude control

Factory settings
1. Time parameter: SL-1,0-OH
2. Longitude: 120 degrees
Latitude: 30 degrees
Month, day, hour, and minute have all been set. In general, users do not need to make any modifications.
5. Parameters can also be set according to user requirements.

[street light controller]SDK-6 Computerized (latitude and longitude) intelligent street light controller

2026-6-17 10:56:14

The SDK-6 computerized (latitude and longitude) intelligent street light controller uses a dedicated computer chip to automatically determine the on/off time according to the local latitude and longitude and seasonal changes. Users do not need to input specific switch times (the local latitude and longitude are pre-set at the factory). The controller can be put into normal use.
The controller has two outputs, A, B, and each can be set to three modes: "all night light" (turn on in the evening until early morning), "midnight light" (turn on in the evening until late at night), and "2 on 2 off" (turn on the midnight light again in the early morning). At the factory, route A is set to full night light and route B is set to midnight light mode.

To save power consumption, the controller operates normally with a flashing second signal. In addition to the control status indication of channels A and B. Do not display any other content. Press any button or when the power is just turned on, the current clock will be displayed and will turn off after 1 minute.
2. Query switch time
The query button allows you to view the actual on/off time for the current day and any other day. Press the 'Query' button to immediately start sequentially querying the switch time. Each time you press the 'Query' button, the display content changes, and the display order is as follows:

Changes to the date during the query process do not affect the actual running calendar clock within the controller; The query process will not interfere with the output control status of channels A and B. After the query is completed, press and hold the "Query" button for more than 2 seconds, or stop pressing the button for 1 minute. Restore the display clock.
3. Adjustment of control parameters (setting method)
By setting, the clock of the controller can be adjusted. Change the originally set latitude and longitude, and modify the control mode of A and B routes: the switch time determined by latitude and longitude can be adjusted within ± 120 minutes.
In the clock display state, press the "Settings" button for more than 2 seconds to enter the settings state; After entering the setting state, the output control remains unchanged from the original state.
There must be a current modification item flashing in the setting state. The contents that can be set are: hour, minute, second, year, month, day, longitude (east longitude), latitude (east longitude), latitude (north latitude), evening light on time, morning light off time, A route working mode (A=1, 2, 3 respectively represent all night, midnight, 2 on 2 off), B route working mode, half night light off time (used in conjunction with midnight light and 2 on 1 mode).
Use the "+" and "-" keys to adjust the current flashing content, press the "Search/Move" key to move the current flashing content, and press the "Set/Line Break" key to change pages; After modification, hold down the "Settings/Line Break" button for more than 2 seconds. Or stop pressing the button for 3 minutes, save the edited and modified content, exit the settings state, and restore the display clock.

4. Manual emergency light on
Press the 'Manual' button for more than 2 seconds. A. The B output immediately turns on the light, and the panel indicates "manual"; Press again to restore to automatic mode.
5. Light sensing control with light control controller
Type 6 controller is the basic type; The light control controller has added light sensing input. Based on the determination of the switch time according to latitude and longitude, fuzzy mathematical methods are used to process the changes in natural light. The lights are turned on appropriately in the evening on rainy days, with a maximum advance time of 30 minutes. Once the light is turned on, it will not switch frequently due to fluctuations in lighting.
The benchmark value for comparison adopts a self-tuning intelligent fine-tuning method, which does not require manual adjustment; The automatic calibration technology used can eliminate the detection error of actual illumination caused by different installation conditions of the photosensitive device and the drift of device parameters during long-term operation. The requirements for installing a light control controller are: it should be able to feel natural light and not be disturbed by other artificial lighting except for the street lamps it controls.
6. Technical parameters
6.1 Working power supply: AC 220V ± 20%
6.2 Power consumption of the whole machine: �� 2W in the light on state, �� 1W in other states
6.3 Output control: Two outputs, with a maximum current of 10A per output
6.4 Timing accuracy: Error ��± 0.5S/d (room temperature 23 ��± 3 ��)
6.5 Built in power supply: high-energy lithium battery, continuous power-off working time �� 5 years
6.6 Storage temperature: -40 �� to+80 ��
Working temperature: -15 ��~+60 ��
Humidity:<90%
6.7 Scope of application: Longitude: 80.0 °~135.9 ° Latitude: 10.0 °~56.0 °
7. Appendix: Reference for Longitude and Latitude of Major Cities in China

SDK-6 computer-based (latitude and longitude) intelligent street light controller

[street light controller]GUK-84(80A) series street lamp light control fully automatic switch

2026-6-17 10:56:06

GUK-84 (80A) series street lamp light control fully automatic switch

[street light controller]GUK-83(60A) series street lamp light control fully automatic switch

2026-6-17 10:55:57

GUK-83 (60A) series street lamp light control fully automatic switch

[street light controller]GUK-82(40A) series street lamp light control fully automatic switch

2026-6-17 10:55:48

GUK-82 (40A) Series Street Light Control Fully Automatic Switch

[street light controller]GUK-81(10A) series street lamp light control fully automatic switch

2026-6-17 10:55:40

GUK-81 (10A) series street lamp light control fully automatic switch

[street light controller]KG-F Probe type street lamp light control fully automatic switch

2026-6-17 10:55:31

KG-F probe type street lamp light control fully automatic switch

[street light controller]GK-10X Street light control automatic switch

2026-6-17 10:55:20

GK-10X Street Light Control Automatic Switch

Street lights for general factories, schools, and streets, and navigation beacon lights for water islands. The on duty personnel will turn off the lights during the break and turn them on again when it gets dark. It often leads to not turning on or off the lights in a timely manner, which not only wastes electricity but also affects work.

Based on relevant information from various sources, advanced integrated circuits from abroad have been introduced, and a practical streetlight automatic switch has been modified based on the streetlight switch previously produced by our factory. This switch is not affected by weather seasons, has reliable functions, high sensitivity, and is popular throughout the country, highly favored by users.

Working principle and structure
The circuit is equipped with a delay circuit, which has the anti-interference ability to prevent accidental lightning, flashlights, cars, and other light from shining on the photoelectric head, and to prevent the false opening and closing of the power supply components caused by falling leaves.
The automatic switch of street lamps is composed of a photoelectric conversion device, namely a photoelectric head and integrated block, electronic components, actuating relays, and AC contactors. During the day, the light intensity is strong, and the current of the photosensitive element increases, causing the relay of the integrated circuit to release and the street lamp to not light up. When it gets dark to a certain degree in the evening, due to the weakened light intensity, the voltage generated by the photosensitive element is low, and the relay attracts the street lamp to light up until the next morning. The integrated trigger for enhanced light intensity automatically operates again and the street lamp goes out.

Installation and Use of GK-10X Street Light Control Automatic Switch
��1�� Install the automatic switch on the wire post where the street lamp is placed or in a place with natural light. Pay attention to cleaning and promptly or regularly wipe off the dust on the automatic switch head to avoid affecting the photoelectric conversion effect. The middle knob of the automatic switch terminal of the street lamp is used to adjust sensitivity, which can be adjusted in both forward and reverse directions. Depending on the local weather conditions, the relay will be closed when it needs to be turned on at night, and released when it needs to be turned off during the day.
��2�� Automatic switch terminal from left to right:
(1) For power input
(2) Shared for the centerline
(3) For power output

Technical Specifications for GK-10X Street Light Control Automatic Switch
1. Power supply voltage: AC 220V (if other power sources are used, please specify when ordering)
2. Contact capacity: A, 220V
3. Relay contact: 1A

5�� Wiring diagram

GK-10X Street Light Control Automatic Switch

[street light controller]JWK-1 Jingwei Intelligent Street Light Controller

2026-6-17 10:55:10

JWK-1 Jingwei Intelligent Street Light Controller

1. Scope of use: 70-136 ° E longitude, 5-60 ° N latitude, suitable for use throughout the country.
2. Clock error: ± 1 second/day.
3. One way output: midnight light/all night light, with a user adjustable range of ± 99 minutes for turning on and off the lights, and the time for turning off the lights can be customized by the user.
Two way output: midnight light/all night light, with a user adjustable range of ± 99 minutes for turning on the light, and the user can customize the turning off time.
4. Output power: 220VAC/3A/10A
5. Working voltage: 220VAC/50/60Hz.
6. Power outage data protection time: four months.
7. Environmental temperature: -20 to+60 �� (if below -20 ��, internal insulation accessories can be added)
8. Environmental humidity:<95%
9. Dimensions: 125 × 82 × 68mm
10. Weight: 365g

[street light controller]JGK-3 Rain proof light controlled delayed streetlight switch

2026-6-17 10:55:02

JGK-3 Rainproof Light Control Delay Street Lamp Switch

AC working voltage: 160-250VAC Static power consumption current: �� 1mA
Environmental working temperature: -25 ��~55 �� Light control output status: light intensity off, light dark conduction on
Direct control power: 2000W Adjustable illumination range: 1-300Lx or customized products with 300 LUX or more according to user requirements
Illuminance control hysteresis: 2Lx output memory delay: 15-30 seconds
Delay time: 1-8 hours Adjustable external dimensions: 85 × 65 × 40mm

Specification Model	terminal	neutral wire	Control power	load type	explanation
JGK-3	three	have	220VAC 10A/3A	arbitrary	AC220V
JGK-3/T	three	have	According to voltage	arbitrary	AC/DC12-48V
Overall Dimensions	85 × 65 × 40 millimeters	Fixed hole spacing		29 millimeters

[street light controller]JGK-2 Rain proof light controlled street light switch

2026-6-17 10:54:53

JGK-2 street light automatic control switch is a new type of light automatic control switch. The input terminal of the controller is connected to AC 220V voltage. When the external light is strong, the output is turned off. When the light is dim to a certain extent, the controller is turned on and outputs AC 220V voltage. It can be used in places that require light control, such as street lamps, advertising light boxes, holiday lights, etc., to achieve automatic control.

The controller is equipped with hysteresis control and output memory delay circuit, which can ensure normal operation in rainy days and environments with short-term light interference. The controller panel is equipped with a metering adjustment knob to meet the needs of users in different installation scenarios.
JGK-2 street light automatic control switch can provide products with various voltages of 12V, 24V, 36V, and 48V for AC and DC operation according to user requirements.

Performance indicators:
AC working voltage: 160-250V Static power consumption current: �� 1mA
Environmental working temperature: -25 ��~55 �� Light control output status: light intensity off, light dark conduction on
Direct control power: 2000W Adjustable illumination range: 1-300Lx or customized products with 300 LUX or more according to user requirements
Illuminance control hysteresis: 2Lx output memory delay: 15-30 seconds
Dimensions: 85 × 65 × 40mm

Installation and usage instructions:
When installing, full consideration should be given to the lighting effect, while avoiding interference from self controlled lighting or other light sources to ensure the reliable operation of the controller.
This controller can adjust the starting illumination by adjusting the adjustment knob on the bottom panel. Turning counterclockwise increases the starting illumination, while turning counterclockwise decreases it. Please refer to the LED indicator when adjusting. When the illumination is higher than the starting illumination, the LED will be on. Otherwise, the LED will turn off, and the relay will close after a delay of 15-30 seconds.
This controller should be equipped with appropriate fuses according to the size of the load to prevent damage caused by short circuits. Please follow the wiring diagram and do not connect the fire and neutral wires in reverse. When the controlled load power is too high, an AC contactor can be installed to increase the control power.
This controller has a rainproof function and can be installed outdoors. When installing, pay attention to the downward direction of the leads.

Specification Model	terminal	neutral wire	Control power	load type	explanation
JGK-2	three	have	220VAC 10A/3A	arbitrary	AC220V
JGK-2/T	three	have	According to voltage	arbitrary	AC/DC12-48V
Overall Dimensions	85 × 65 × 40 millimeters	Fixed hole spacing		29 millimeters

[street light controller]GUK8 series street light automatic control switch

2026-6-17 10:54:44

Main technical data

Wiring method

GUK8 series street light automatic control switch

[mechanical counter]JQ-014 Hand operated four digit counter

2026-6-16 20:50:04

JQ014 Four Position Press Counter

Working principle and introduction: JQ014 counter is used to accumulate and record the number of back and forth movements of instruments or machinery, with digital direct reading display and zero return device. After returning to zero, accumulation counting can be started from "0000". Can be used for measuring and counting freight, pedestrians, and vehicles passing through medical, textile, mechanical, warehouse, and dock facilities.

[mechanical counter]JZR(RA4) Hand operated counter

2026-6-16 20:49:56

JZR (RA4) Hand operated Counter

Press the button to push the ratchet, perform decimal addition counting, and have a rotating zeroing device. The maximum accumulation is 9999, with a 1:1 pressing ratio and a technical speed of 300 times/minute. It is widely used in stations, docks, counting and tallying, as well as in public places for vehicle entry and exit, crowd counting, and so on.

[mechanical counter]JS-4 type timer

2026-6-16 20:49:47

JS-4 timer

[mechanical counter]JZ115 type small five digit table

2026-6-16 20:49:39

The JZ115 small five digit meter is designed based on the Z3-5 tachometer. It has the advantages of small size, beautiful appearance, convenient use, and more accurate counting. Mainly used for measuring and recording the depth of mine drilling and the number of winding machine turns. This table consists of five digits. The rotation direction of the shaft can be clockwise or counterclockwise, with clockwise rotation indicating acceleration and counterclockwise rotation indicating increase or decrease. The highest recorded number is 9999.9, with the first digit being 1/10 of the shaft's rotation. After one rotation of the shaft, it can automatically carry over.

The JZ115 small five digit meter is equipped with a reset mechanism. If a certain quantity is recorded, the reset button can be pressed to reset all of them, and then the second stage record can be made. But it cannot reset to zero during rotation. The installation of JZ115 small five digit meter should be smooth and concentric with the main body. Otherwise, it will cause the rotating spindle to twist or break, resulting in inaccurate counting or malfunction.
The maximum speed of this table is 150 revolutions per minute. If it is too fast, it may damage the internal components.
The JZ115 small five digit dial and gear system are made of special engineering plastics and should not come into contact with high temperatures or flammable gases. Oil must be added frequently to the bearings.

[mechanical counter]MRX-83 type counter

2026-6-16 20:49:30

MRX-83 Counter

[mechanical counter]JM316 series rolling counter

2026-6-16 20:49:18

The JM316 series rolling counter is designed according to needs and is used as a recorder for length and various mechanical transmissions. It is generally used for recording large quantities of length in textile, printing and dyeing, plastic film, artificial leather, and other industries.

The JM316 series rolling counter is a six digit number, and the rotation direction of the shaft can be clockwise or counterclockwise, with clockwise rotation increasing and counterclockwise rotation decreasing. The highest recorded number is 1-99999.9. When the second digit of the counter displays 1 and the record length is 1M, scroll around 3 times, and so on, rounding up to 10. The transmission ratio is 1:3, and the maximum counting speed is 360 revolutions per minute.
The counter is equipped with a reset mechanism. After recording a certain quantity, the reset button can be pressed to reset all the numbers, and then the second stage of recording can be made.
The counter jumps flexibly, counts correctly, and displays numbers clearly. The working environment temperature is between -15 �� and+55 ��, which can maintain normal counting.

[mechanical counter]67-1 type measuring counter

2026-6-16 20:49:10

The 67-1 type length measuring counter is an improvement on the Z73-5 tachometer, incorporating the advantages of a pull type counter. Suitable for measuring and recording the depth of mine drilling, cable length, and number of winding machine turns.
The 67-1 type length measuring counter is a mechanical transmission automatic carry up recorder. Equipped with a reset mechanism, after stopping the machine, rotate the character axis in the forward direction and reset all numbers to zero.
But it can only rotate the incremental recorder in the forward direction. Equipped with a reset mechanism, after stopping the machine, rotate the character axis in the forward direction and reset all numbers to zero. But it can only rotate in the forward direction for incremental recording, and cannot rotate in the reverse direction for decreasing.

The installation of the 67-1 type length measuring counter should be smooth and concentric with the main body. Otherwise, it will cause the rotating spindle to twist or break, resulting in inaccurate counting or malfunction.
The maximum speed of the 67-1 type length measuring counter is 150 times per minute. If it is too fast, it will damage the internal components.
The inner wheel and gear system are made of special engineering plastics and should not come into contact with high temperatures or thinners. Simply add a little engine oil during normal operation.

[mechanical counter]JC105 type mechanical length measuring counter

2026-6-16 20:49:00

The JC105 mechanical length counter is a counting device used to measure length. This counter uses the fixed length of two rollers to measure the length of the object being measured

The JC105 mechanical length counter is mainly used in industries such as textile, papermaking, printing and dyeing, leather making, and film production.

model	JC105
Display numerical specifications	Height x width, 6.5 mm x 3.8 mm
Maximum cumulative computing capacity	nine thousand nine hundred and ninety-nine point nine nine
rated speed	200r/mm (roller)
Wheel rotation distance (meters)/display data	1:1
Operating Temperature	-10�桫+50��

JC105 Mechanical Length Counter

[mechanical counter]JL056B Six bit Pull Counter

2026-6-16 20:48:52

JL056B six bit pull counter, used to record the cumulative number of back and forth movements of recording instruments or machinery. Connect the input shaft pull arm of the counter to the instrument or machine to perform pull counting. Digital direct reading display with a rotating zero return device. After returning to zero, it is still possible to start accumulating counting from zero. The JL056B counter is mainly used in industries such as textiles, machinery, circuit breakers, and mining.

model	JL056B six bit pull counter
Display numerical specifications	Height x Width 4.4 mm x 3 mm
Operating Temperature	-10�桫+50��
Maximum cumulative computing capacity	ninety-nine thousand nine hundred and ninety-nine
transmission ratio	1:1
Counting speed	�� 500 times/minute
Pull angle	Maximum pull angle 43o, minimum pull angle 38o
torque	��8 N·cm
Overall dimensions	79.8mm×32mm×46mm
Can be designed and produced according to customer needs

JL056B six bit pull counter

[mechanical counter]JL645M-A Five digit Pull type Mechanical Counter

2026-6-16 20:48:43

JL645M-A five position pull type mechanical counter is used to accumulate and record the number of mechanical reciprocating movements, without a reset mechanism. When the count reaches 99999, start counting the next cycle from 00000. The counting wheel of the counter is driven by internal teeth. When the counter lever is pulled, the propulsion mechanism connected to the lever causes the counting wheel to perform addition counting. This type of counter is mainly used in industries such as switchgear, experimental equipment, and printing equipment.

Display numbers	Height x Width 4mm x 2mm
Maximum cumulative computing capacity	ninety-nine thousand nine hundred and ninety-nine
Rated speed	300 times/minute
transmission ratio	1��1
Working environment temperature	�桫+50��
Working environment humidity	��85%
torque	��1N·cm
Pull angle	Minimum: 37 ° Maximum: 49 °
Can be designed and produced according to customer needs

JL645M-A Five Position Pull Mechanical Counter

[mechanical counter]JL545ZB series mechanical counter

2026-6-16 20:48:34

The JL545ZB series mechanical counter is used to accumulate and record the number of mechanical reciprocating movements, without a reset mechanism. When the count reaches 99999, you can start the next cycle from 00000. When the counter lever is pulled, the propulsion mechanism connected to the lever causes the counting wheel to perform addition counting.

The JL545ZB series mechanical counter is mainly used in high-voltage switchgear products, and can also be applied to testing equipment, printing equipment, etc.

model	JL545B	JL545M	JL545ZB		JL545ZM
Display numerical specifications	Height x Width 4 mm x 2 mm
Operating Temperature	-10�桫+50��
Maximum cumulative computing capacity	ninety-nine thousand nine hundred and ninety-nine
transmission ratio	1:1
Counting speed	�� 300 times/minute
Pull angle	Maximum pull angle 41 °, minimum pull angle 38 °
torque	��5 N·cm
characteristic	Pull right, pull the lever clockwise	Pull right, pull the lever counterclockwise		Pull left, pull the lever clockwise	Pull left, pull the lever counterclockwise
weight	About 23g
Can be designed and produced according to customer needs

[mechanical counter]SJ514 Counter

2026-6-16 20:48:26

Counting range	0000-9999
Counting speed	�� 300 times/minute
Count times/indication	1 : 1
Return-to-zero method	Push button type
Error	± 1+10000 counts
Temperature for rotating use	-10��--65��
Weight	70 grams

SJ514 counter

[mechanical counter]CCVPL mechanical mold counter

2026-6-16 20:48:17

The CCVPL mechanical mold counter is used to automatically remember the number of mold cycles and product quantities. Count range: 0-999999, not reset to zero. Let your molds truly be digitally managed.

Installation dimensions

CCVPL mechanical mold counter

[mechanical counter]JZ607B Type 7 Bit Mechanical Counter

2026-6-16 20:48:05

Z607B 7-bit mechanical counter

[mechanical counter]JZ095 series five digit mechanical counter

2026-6-16 20:47:57

Working principle and introduction:
The JZ095B series five digit mechanical counter can be used to measure the rotational speed of various types of machinery, measure the length and flow rate of produced products, as well as measure depth and height. Widely used in industries such as machinery, metallurgy, light industry, printing and dyeing. It is an essential tool for measurement and recording.

Technical parameters of JZ095 series five digit mechanical counter:

model	JZ095B	JZ095B-��	JZ095B-��	JZ095B-��	JZ095B-��	JZ095B-VI	JZ095B-X
Display numerical specifications	Height x Width: 6.5 mm x 3.8 mm
Operating Temperature	-10�桫+50��
Maximum cumulative computing capacity	nine thousand nine hundred and ninety-nine point nine nine			ninety-nine thousand nine hundred and ninety-nine			nine thousand nine hundred and ninety-nine point nine
transmission ratio	1:5	1:10		1:1		1:2	1:0.624
rated speed	��600r/min	��300r/min		��1000r/min			��600r/min
torque	��1 N·cm

Product installation dimension diagram:

JZ095 series five digit mechanical counter

[mechanical counter]JZ067B series mechanical rotation counter

2026-6-16 20:47:48

Working principle and introduction:

JZ067B series mechanical rotation counter is a counter used for flow meters, which achieves counting by driving a worm gear. This counter can also be used as a general mechanical rotation counter for accumulating and counting various measurement data.

Technical parameters of JZ067B series mechanical rotation counter:

model	JZ067B	JZ067B-��	JZ067ZB	JZ067ZB-��
Display numerical specifications	Height x Width 4.8 mm x 3.5 mm
Operating Temperature	-10�桫+50��
Maximum cumulative computing capacity	nine million nine hundred and ninety-nine thousand nine hundred and ninety-nine
transmission ratio	2:1
rated speed	160r/min
torque	��0.5 N·cm
characteristic	Short input shaft	Long input shaft	Left short input shaft	Left long input shaft

Product installation dimension diagram:

JZ067B series mechanical rotation counter

[mechanical counter]JZ054 type mechanical transmission counter

2026-6-16 20:47:40

JZ054 mechanical transmission counter is a counter for flow meters, which drives a helical gear to achieve a digital wheel count of 10. Rotate back to the component, and the counter can fully return to zero position. This counter can be used as a universal rotary counter for accumulating and counting various measurement data.

JZ054 type mechanical transmission counter

[mechanical counter]JQ014 series four digit press counter

2026-6-16 20:47:32

Working principle and introduction:

JQ014 series four digit press counter is used to accumulate and record the number of back and forth movements of instruments or machinery, with digital direct reading display and equipped with a zeroing device. After returning to zero, accumulation counting can still start from "0000". Can be used for counting the number of goods, pedestrians, and vehicles passing through medical, textile, mechanical, warehouse, and dock facilities.

Technical parameters of JQ014 series four digit press counter:

model	JQ014	JQ014-A	JQ014-B	JQ014-C
Display numerical specifications	Height x Width 4.4 mm x 3 mm
Operating Temperature	-10�桫+50��
Maximum cumulative computing capacity	nine thousand nine hundred and ninety-nine
transmission ratio	1:1
Counting speed	�� 200 times/minute
Pressing torque	��8 N·cm	��9 N·cm
characteristic	Yellow plastic shell	With a ring	With ring and frame	with base

Installation dimension diagram of JQ014 series four position press counter:

JQ014 series four digit press counter

[mechanical counter]JQ014A Type Four Position Press Counter

2026-6-16 20:47:23

Working principle and introduction:

The JQ014A four position press counter uses a push plate to push the ratchet wheel for decimal addition counting. The counter is equipped with a reset device to rotate the reset handle, and the accumulated numbers can all be reset to zero. The counter is mainly used for station and dock cargo handling; Statistics of the number of people entering and leaving sports fields, shops, and other areas, as well as statistics of passing vehicles.

JQ014A Four Position Press Counter Series and Related Technical Parameters:

Display numerical specifications	Height * width, mm4.4*3
Maximum accumulation specification	nine thousand nine hundred and ninety-nine
Press frequency/indication	1:1
Counting speed	�� 300 times/minute
quality	30g

[mechanical counter]JL144-B type mechanical counter

2026-6-16 20:47:14

Working principle and introduction:
The JL144-B mechanical counter is a subtractive preset counter. It relies on the swing of a lever on the right side of the counter to drive the ratchet wheel for subtraction counting. The pre-set values should be set by turning the word wheel one by one before each cycle. When the count reaches the set value, the displacement of the control rod inside the counter drives the stopping mechanism of the machine to perform braking, completing the control function.

JL144-B mechanical counter series and related technical parameters:

Display numerical specifications	Height * Width mm 4 * 2.6
Maximum cumulative computing capacity	nine thousand nine hundred and ninety-nine
transmission ratio	1:1
Counting speed	120 times/minute
torque	��9Ncm
quality	About 120 grams

Product installation dimension diagram:

JL144-B mechanical counter

[mechanical counter]JL085 Type Five Bit Pull Counter

2026-6-16 20:47:06

Working principle and introduction:
The JL085 five position pull counter is used to accumulate and record the number of mechanical reciprocating movements, without a reset mechanism. When the count reaches 99999, you can start the next cycle from 00000. The counting wheel of the counter is driven by internal teeth. When the counter lever is pulled, the propulsion mechanism connected to the lever causes the counting wheel to perform addition counting. This type of counter is mainly used in high-voltage switchgear products, and can also be applied to testing equipment, printing equipment, etc.

Product series and related technical parameters:

model	JL085	JL085-B	JL085ZM
Display numerical specifications	Height x Width 4 mm x 2 mm
Operating Temperature	-10�桫+50��
Maximum cumulative computing capacity	ninety-nine thousand nine hundred and ninety-nine
transmission ratio	1:1
Counting speed	�� 300 times/minute	�� 300 times/minute	�� 300 times/minute
Pull angle	Maximum pull angle 41o, minimum pull angle 37o
torque	��4.18 N·cm
characteristic	Pull right, pull the lever counterclockwise	Pull right, pull the lever clockwise	Pull left, pull the lever counterclockwise
weight	About 23g

Product installation dimension diagram:

JL085 Five Position Pull Counter

[mechanical counter]JL055B Type Five Bit Pull Counter

2026-6-16 20:46:57

Working principle and introduction:

The JL055B five digit pull counter is used to record the number of mechanical reciprocating movements. Pull the lever of the counter, and the push plate connected to the lever pushes the ratchet on the number wheel to perform decimal addition counting. The counter is equipped with a zeroing mechanism. Rotate the reset handle to reset all the accumulated numbers in the counter to zero. This counter is mainly used in industries such as machinery, circuit breakers, printing, and high and low voltage switches.

Product series and related technical parameters:

model	JL055B	JL055B	JL055M	JL055ZB	JL055ZM
Display numerical specifications	Height x Width 4 mm x 2 mm
Operating Temperature	-10�桫+50��
Maximum cumulative computing capacity	ninety-nine thousand nine hundred and ninety-nine
transmission ratio	1:1
Counting speed	�� 250 times/minute
Pull angle	Maximum pull angle 37o, minimum pull angle 38o
torque	��8 N·cm
characteristic	Pull right, pull the lever clockwise		Pull right, pull the lever counterclockwise	Pull left, pull the lever clockwise	Pull left, pull the lever counterclockwise
weight	About 72g

Installation dimension diagram of JL055B five position pull counter:

JL055B Five Position Pull Counter

[mechanical counter]JC106 type length measuring counter

2026-6-16 20:46:49

Principle and Introduction of JC106 Length Measuring Counter:
The JC106 mechanical length counter is a counting device used to measure length. This counter uses the fixed length of two rollers to measure the length of the object being measured. Mainly used in industries such as textile, papermaking, printing and dyeing, leather making, and film production.

JC106 type length measuring counter product series and related technical parameters:

model	JC106
Display numerical specifications	Height x width, 4 mm x 2.5 mm
Maximum cumulative computing capacity	ninety-nine thousand nine hundred and ninety-nine point nine
rated speed	400r/min (roller)
Wheel rotation distance (meters)/display data	1:1

Product installation dimension diagram:

JC106 type length measuring counter

[mechanical counter]JC075 type mechanical length measuring counter

2026-6-16 20:46:41

The JC075 mechanical length counter is a counting device used to measure length. The counter uses the fixed length of two rollers to measure the length of the measured object (i.e. the roller rolls 1 meter and the counter displays 1). The counter is equipped with a zeroing device. After completing a measurement process, reset the counter to zero to proceed to the next measurement process. This counter is mainly used in industries such as textile, papermaking, printing and dyeing, leather making, and film.

JC075 Mechanical Length Measuring Counter Series and Related Technical Parameters:

model	JC075
Display numerical specifications	Height x width, 6.5 mm x 4.5 mm
Operating Temperature	-10�桫+50��
Maximum cumulative computing capacity	ninety-nine thousand nine hundred and ninety-nine
Wheel rotation distance (meters)/display data	1:1
rated speed	500r/min
rated speed	500r/mm (roller)

Installation dimension diagram of JC075 mechanical length counter:

JC075 Mechanical Length Measuring Counter

[mechanical counter]J250 type five position mechanical preset counter

2026-6-16 20:46:32

Working principle and introduction:

The J250 series five position mechanical preset counter is mainly divided into two categories: rotation and pulling, and is suitable for controlling the rotation or stroke of machines or instruments. Press the button on the left side of the counter to input the desired value into the counter by sequentially pressing the other five buttons. Release the button on the left, and the counter will display the value you have selected. (Among them, with preset settings, when the counter number displays "00000", the counter sends a signal to control the machine or instrument to stop working).
The J250 series five digit mechanical preset counter is widely used in the printing, textile, printing and dyeing, knitting, cable, telecommunications, military, light industry, and machinery industries. It can be used alone or in conjunction with testing instruments and modern control equipment to achieve quantitative control functions.

Technical parameters of J250 five position mechanical preset counter:

model	transmission ratio	Display numerical specifications (height x width)	Maximum cumulative computing capacity	Speed (r/min)	Torque (N · cm)	Working temperature (��)	rotation direction	Load of output signal
J250 001	1:1	6.5 mm×5.6 mm	ninety-nine thousand nine hundred and ninety-nine	��3000	��1.8	-10��+50	Parallel axis counterclockwise rotation	Maximum voltage 250V, maximum current 2A, power<50W
J250 002	1:1			��3000			Parallel axis clockwise rotation
J250 011	1:10			��300			Parallel axis counterclockwise rotation
J250 012	1:10			��300			Parallel axis clockwise rotation
J250 021	1:5						Parallel axis counterclockwise rotation
J250 022	1:5						Parallel axis clockwise rotation
J250 031	1.6:1						Parallel axis clockwise rotation
J250 041	5:1						Parallel axis clockwise rotation
J250 042	5:1						Parallel axis clockwise rotation
J250 101	1:1			��1500	��3		Vertical axis counterclockwise rotation
J250 102	1:1			��1500	��3		Rotate the vertical axis clockwise
J250 301	1:1			��240	��10		Pull counterclockwise parallel to the axis
J250 302	1:1			��240	��10		Pull clockwise parallel to the axis
Can be designed and produced according to customer needs

Installation dimension diagram of J250 five position mechanical preset counter:

J250 type five position mechanical preset counter

[mechanical counter]J116 series six digit mechanical counter

2026-6-16 20:46:23

Working principle and introduction:
The J116 series six bit counter is a mechanical rotary counter. Drive the drive shaft and use the internal gear mechanism to drive the counting wheel for decimal addition counting. The drive shaft rotates counterclockwise once, and the count values accumulate by 1, 2, 5, and 10. Press the reset button on the left to instantly reset the number on the counting wheel to zero. The J116 series six digit counter can be used to measure the rotational speed of various machinery, as well as to measure length, depth, flow rate, etc., and is therefore widely used in industries such as machinery, wire production, tape production, and printing. It is an essential tool for measurement and recording.

Product series and related technical parameters:

model	J116-001	J116-002	J116-004
Display numerical specifications	Height x Width 4 mm x 2.5 mm
Operating Temperature	-10�桫+50��
Maximum cumulative computing capacity	nine hundred and ninety-nine thousand nine hundred and ninety-nine
transmission ratio	1:1	1:2	1:5
rated speed	��1000r/min	��500r/min	��500r/min
torque	��3N·cm
weight	About 70g
Can be designed and produced according to customer needs

Product installation dimension diagram:

J116 series six digit mechanical counter

[mechanical counter]J115-001 Textile Machinery Counter

2026-6-16 20:46:14

Working principle and introduction:
The J115 textile machinery counter uses four sets of counting wheels for digital display and is controlled by a shift adjustment knob. When the shift adjustment knob displays "A", the input shaft rotates and the A group counting wheel counts. If the adjustment knobs are set to B, C, and D respectively, the set of counting wheels that indicates the same number of revolutions as the adjustment knob will display the input shaft's rotation speed. This counter can only perform cumulative counting and does not have a reset mechanism. It can be used to record the output of different shifts on a machine.
Mainly used on weaving machines, ribbon machines, and other machines in the textile industry that implement multi shift systems.

Product series and related technical parameters:

model	J115-001
Display numerical specifications	Height x Width 6.5 mm x 3.8 mm
Operating Temperature	-10�桫+50��
Maximum cumulative computing capacity	ninety-nine thousand nine hundred and ninety-nine point nine
Input shaft speed/digital display	12.5��1
rated speed	��1200r/min
torque	��1.5 N·cm
shift	four
Can be designed and produced according to customer needs

Product installation dimension diagram:

J115-001 Textile Machinery Counter

[mechanical counter]J114 Type Five Bit Pull Counter

2026-6-16 20:46:05

The J114 counter is used to accumulate and record the number of back and forth movements of instruments or machinery. Connect the input shaft pull arm of the counter to the instrument or machine to perform pull counting. Digital direct reading display with a rotating zero return device. After returning to zero, it is still possible to start accumulating counting from zero. The J114 counter is mainly used in industries such as textiles, machinery, circuit breakers, and mining.

Technical parameters of J114 five position pull counter:

model	J114	J114A	J114B	J114C	J114Z	J114N
Display numerical specifications	Height x Width 4.4 mm x 3 mm
Operating Temperature	-10�桫+50��
Maximum cumulative computing capacity	ninety-nine thousand nine hundred and ninety-nine
transmission ratio	1:1
Counting speed	�� 500 times/minute
Pull angle	Maximum pull angle 43o, minimum pull angle 38o
torque	��8 N·cm
characteristic	The installation hole is diameter 3.4 mm	The installation hole is diameter 4.5 mm	Unilateral installation	No return to zero	Zuo La	Pull the lever counterclockwise (right pull)
weight	About 80g		About 70g	About 75g	About 80g
Can be designed and produced according to customer needs

Product installation dimension diagram:

J114 Type Five Position Pull Counter

[mechanical counter]JS-A-2 Pull type mechanical counter

2026-6-16 20:45:57

JS5-A Pull type Mechanical Counter Main Technical Parameters:
Counting range: 0-9999
Arm working angle: 0 ° C-50 ° C

[mechanical counter]JS5 Pull type mechanical counter

2026-6-16 20:45:49

JS5-A Pull type Mechanical Counter Main Technical Parameters:
Counting range: 0-9999
Arm working angle: 0 ° C-50 ° C

JS5-A-1:

[mechanical counter]D67-F Automatic carry up counter

2026-6-16 20:45:41

The D67-F automatic carry up counter is a mechanically driven automatic carry up counter suitable for counting applications in general punching machines, printing machines, and other machinery.
Count range: 0-99999.
Pull the lever once to jump one number, and it will automatically carry forward.
Rotate the character axis in the forward direction, and all numbers will return to zero.
The internal gear train of this device is made of special plastic, and should not come into contact with toluene, thinner, etc. during disassembly and cleaning. Just add a little engine oil.

Counting range	000001-999999
Counting speed	�� 350 times/minute
Inspection location	Top surface
transmission ratio	1:1
Return-to-zero method	rotary
Overall dimensions	38*30mm

D67-F automatic carry up counter

[mechanical counter]D94-S type small six digit pull counter

2026-6-16 20:45:32

The D94-S small six digit pull counter is designed based on the D67-F pull counter, which has the advantages of beautiful appearance and large counting range.
This device is a mechanical driven automatic carry up counter, mainly used for counting applications in general punching machines, printing machines, and other operations.
The pull rod bounces one number every time it is pulled, and it automatically moves forward. The angle of the pull rod can be adjusted arbitrarily.
The counting range of this device is 0-999999.

The D94-S small six digit pull counter should be lightly oiled frequently during use.

[mechanical counter]75- Type II Counter

2026-6-16 20:45:24

The 75-II type counter is a mechanical pull automatic carry up counter, suitable for counting mechanical operations such as general machine tools and various presses.
The counting range of this device is 0-9999.
The angle of the pull rod can be adjusted arbitrarily. Every time you pull it, it bounces one number. When it reaches ten, it returns to zero. The number on the press handle returns to zero.
This device can withstand large vibrations without affecting counting accuracy.
When installing the 75-II type counter, it must be parallel to the workbench and maintain the concentricity and perpendicularity of the counter, otherwise it will affect the correct counting or normal rotation. When using, the pull rod must be pulled to the right foot, but not too far.
The maximum speed of this device is 200 times per minute. If it is too fast, it will damage the internal components.
The internal wheels and gears of the 75-II counter are made of special engineering plastic and should not come into contact with high temperatures or flammable gases. Simply add engine oil when using.

[mechanical counter]D-70 type counter

2026-6-16 20:45:15

The D-70 counter is a mechanical pull automatic carry up counter. Suitable for counting mechanical operations such as general machine tools and various presses.
Count range: 0-99999.
The angle of the pull rod can be adjusted arbitrarily.
Every time you pull, it jumps one number, every decimal. Press the zero button to reset all the numbers to zero. Can withstand large vibrations without affecting counting accuracy.
This device must be installed parallel to the workbench. Keep the concentricity of the counter perpendicular, otherwise it will affect the correct counting or normal rotation.
When using a pull rod, it must be pulled to the right foot, but not too far.
The maximum speed of the D-70 counter is 200 beats per minute, and if it is too fast, it will damage the internal components.
The internal wheels and gears of the D-70 counter are made of special engineering plastics and should not come into contact with high temperatures or flammable gases. Simply add engine oil when using.

[mechanical counter]JS-5 series mechanical counter JS-5-F JS-5-E JS-5-D JS-5-C JS-5-B JS-5-A JS-5

2026-6-16 20:45:06

The JS-5 series mechanical counter is specifically designed for use with vacuum circuit breakers. Absorbing the advantages of similar foreign products and having its own unique design, it has received praise in the use of some domestic vacuum circuit breaker manufacturers.

Technical features: The counter cannot return to zero halfway, and can rotate clockwise or counterclockwise.
Counting range: 0~99999

[mechanical counter]75-I type rotary length measuring counter

2026-6-16 20:44:58

The 75-I tachometer is a recorder used for measuring length and various machine rotations, generally suitable for mining drilling depth. It measures and records the length of the cable and the number of coils wound.
This table is a five digit number, with the rotation direction of the shaft being clockwise and counterclockwise, clockwise rotation being increasing, and counterclockwise rotation being decreasing. The highest recorded number is 99999.
The first digit to be rotated is 1/10 of the rotation axis, and the axis can automatically carry after one rotation.

The 75-I rotary length counter is equipped with a reset mechanism. If a certain number of records are recorded, the push handle can be reset to zero, and then the second stage of recording can be made.
Attention should be paid to balance when installing this table, and it should be concentric with the host when in contact, otherwise it may cause the rotation to twist or break, resulting in inaccurate counting or malfunction.
The maximum speed of this table is 350 times per minute. If it is too fast, it may cause damage to the components.
When resetting to zero, the leading digit must be turned within the range of the window cover and cannot be reset during rotation.
The wheel and gear of the 75-I rotary length measuring counter are made of special engineering plastics and should not come into contact with high-temperature flammable gases. The bearing must be regularly oiled.

[Tiring timer]UW248 type timer

2026-6-16 12:28:06

UW248 timer

[Tiring timer]H3J LCD timer

2026-6-16 12:27:58

H3J LCD timer is the latest ultra small timer developed, which adopts highly integrated surface mount components, occupies a small space, has a wide range of applications, and has good anti-interference ability. It can be widely used in the fields of timing and counting such as elevators, machinery, packaging, and switchgear.

Six digit LCD display, clear display;
Internal built-in power supply, no need for external connection;
Panel reset with lock, safe and reliable;
No mechanical wear and tear, long lifespan.

display	LCD display
digit	6 people
character height	6 millimeters
power supply	Built in lithium battery
battery life	About 7 years
Exhaustive time range	9999 hours 59 minutes
Reset method	Panel button reset or external terminal reset
protection level	Level 2
Front panel protection	IP54,DIN40050
Rear panel protection	IP00,DIN40050
anti-interference capability	IEC801�� Level 2
Operating Temperature	-10�桪+50��
Storage temperature	-20�桪+70��
Environmental humidity for use	35��85%RH

H3J LCD timer

[Tiring timer]TH087 Type AC Timer

2026-6-16 12:27:49

TH087 AC Timer

Timing digits	7 digits
Maximum cumulative number	99999.99 hours
power supply voltage	AC220V �� AC110V
Allowable fluctuation range of input voltage	±10%
frequency	50Hz
power consumption	1.6VA
working environment	The temperature is between -10 �� and+50 ��, and the relative humidity is not higher than 75%
quality	0.1kg
	Can be designed and produced according to customer needs

TH087 AC Timer

[Tiring timer]C308B type LCD electronic timer

2026-6-16 12:27:40

The C308B LCD electronic timer is a controlled timing product (hereinafter referred to as the timer), which uses highly integrated surface mount components, occupies small space, has multiple timing functions, and has a sturdy and reliable installation structure.

display	7-segment LCD display
character height	7 millimeters
power supply voltage	DC3V (built-in battery)
power consumption	��0.5W
display mode	Method 1: XXXXX-XX (hour minute) Method 2: XX-XX-XX (hour minute second)
Timing range	0��99999-59-59 �� From 0 to 99999 hours, 59 minutes, and 59 seconds
Working environment temperature	-10��~+50��
digit	8 digits
Storage temperature	-20��~+60��

C308B LCD electronic timer

[Tiring timer]C306A type LCD electronic timer

2026-6-16 12:27:32

The C306A LCD electronic timer is a controlled timing product (hereinafter referred to as the timer), which uses highly integrated surface mount components, ultra small size, long service life, and a sturdy and reliable installation structure.

display	7-segment LCD display
digit	6 people
character height	7mm
power supply voltage	Built in battery power supply
trigger voltage	AC/DC 85-265V
Accumulated time error	�Q0.01%
Timing range	0��9999.59 �� From 0 to 9999 hours and 59 minutes
display mode	XXXX.XX (time Score)
Operating Temperature	-20 - +85��
Storage temperature	20 - +85��
Use humidity	35 - 85%RH
battery life	More than 6 years

C306A LCD electronic timer

[Tiring timer]F72-HC Marine timer

2026-6-16 12:27:23

F72-HC marine timer

[Tiring timer]F96-HC Marine timer

2026-6-16 12:27:15

F96-HC timer, timer
AC��110V��220V��380V ��
DC:12V-24V
Frequency 50HZ 60HZ,
99999.99 hours without reset,
Dimensions 72X72mm
Hole 68X68mm.
The product complies with the national standard GB/T7676-1998.

F96-HC marine timer is suitable for high demand and harsh environments such as ship distribution cabinets, railway trains, power systems, petrochemicals, industrial and mining, nuclear power plants, mobile power plants, etc. The instrument adopts advanced movement structure. The measuring mechanism of this series of electric meters is composed of magnetic electric high-end gears. The rotating part has no friction, reliable operation, high resistance to mechanical impact, and can also replace imported meters.
Various models and specifications can be made for 50HZ and 60HZ

[Tiring timer]SYS-3 Quartz electronic fully sealed timer

2026-6-16 12:27:06

The SYS-3 quartz electronic fully sealed timer has a novel structure, agility, high precision, stable and reliable performance, long lifespan, wide adaptability to various environments, low price, and easy use. It is most suitable for standard industrial timing and widely used in various places such as construction machinery, engineering vehicles, agricultural machinery, generators, air compressors, water pumps, cranes, and various types of cars.

Timing range	9999.60 (hours)��99999.9 (hours)
Timing accuracy	±zero point zero one
Zeroing device	No return to zero
voltage type	12V-36V, 6V-80V (AC/DC universal)100V-250V
meritrate	0.3W
Operating temperature	-10��--50��
relative humidity	fully sealed
seismic amplitude	10-70HZ 1-8g (gravity)

SYS-3 quartz electronic fully sealed timer

[Tiring timer]SYS-2 type quartz electronic fully sealed timer

2026-6-16 12:26:58

Timing range	9999.60 (hours)��99999.9 (hours)
Timing accuracy	±zero point zero one
Zeroing device	No return to zero
voltage type	AC/DC12V-36V��AC100V-250V
meritrate	0.3W
Operating temperature	-10��--50��
relative humidity	fully sealed
seismic amplitude	10-70HZ 1-8g (gravity)

SYS-2 quartz electronic fully sealed timer

[Tiring timer]SYS-1 type quartz electronic fully sealed timer

2026-6-16 12:26:49

Timing range	99999.9 (hours))
Timing accuracy	±zero point zero one
Zeroing device	No return to zero
voltage type	AC/DC12V-36V��AC100V-250V
meritrate	0.3W
Operating temperature	-10��--50��
relative humidity	fully sealed
seismic amplitude	10-70HZ 1-8g (gravity)

SYS-1 quartz electronic fully sealed timer

[Tiring timer]SYS type quartz electronic fully sealed timer

2026-6-16 12:26:41

SYS type quartz electronic fully sealed timer technical parameters:

Dimensions: 65x55x32mm (MAX)
Working voltage: AC220V-240V (50Hz, 60Hz) DC12V-36V
Timing range: 0-9999.9 hours (h)
Weight: 55g

Installation method: The product is fixed to the panel with screws
The SYS quartz electronic fully sealed timer is suitable for industrial production, generators, construction vehicles, environmental protection equipment, electric vehicles, etc.

[Tiring timer]SH3L Ultra small time timer

2026-6-16 12:26:33

The SH3L ultra small timer has a built-in power supply, a very small size, and high precision, making it particularly suitable for high-tech fields and high-precision medical devices.
DIN48 × 24mm standard panel size
Internal built-in power supply, no need for external connection
High precision over time
6-digit LDC display, large and clear display
Panel reset with lock to prevent misoperation
The longest tiring time is 9999 days
No mechanical wear and tear, long lifespan
Exhaustive time range: 99999.9 hours 9999.99 hours 99 hours 59 minutes 59 seconds 9999 days 23 hours 999999 days 23 hours

Technical parameters of SH3L ultra small timer
Power supply: Internal power supply
Battery life: �� 6 years
Display font height: 6.7mm
Accumulated time error: �� 0.02%
Maximum resistance of contact connection: �� 10k ��
Minimum resistance for contact disconnection: �� 500k ��

SH3L ultra small timer external dimensions

SH3L ultra small timer

[Tiring timer]YSL-51 type accumulation timer

2026-6-16 12:26:24

I. Overview
The YSL-51 accumulation timer is a novel instrument for accurately accumulating the operating time of mechanical power equipment. It obtains a stable speed from a micro synchronous motor and displays the operating time directly on the counter through a precise gear reduction mechanism, making its reading highly intuitive.

II. Purpose
This accumulation timer is installed on mechanical power equipment and can be used normally with a general two-phase power cord. After being powered on, it records the accumulated time accordingly. Provide reliable data for the regular maintenance and testing of equipment during its actual operation. So this instrument is a novel device for scientific management and modern production.

3�� Technical parameters:
This meter is displayed with a six digit wheel, with a maximum cumulative time of 999999 hours. The first wheel is 60 minutes. The working voltage is AC 110V, 220V, 380V
Frequency: 50Hz
Current: �� 20MA
Error: -0.014% (-2 minutes/24 hours)

[Tiring timer]JSQ-4 Timer

2026-6-16 12:26:16

Main technical parameters of JSQ-4 timer:

Power supply voltage: 110V/220V/380V
Power frequency: 50Hz/60Hz
Timing range: 0-9999.9h (overflow returns to zero) Word wheel decimal timing
Timing error:<0.4%
Insulation withstand voltage: 2400V
Protection level: IP-55
Environmental temperature: -40 �� -+70 ��
Anti vibration performance: able to withstand vibrations with an acceleration of 7g
Has anti moisture, anti mold, and anti salt spray properties

[Tiring timer]LCD electronic timer

2026-6-16 12:26:07

H7EC-T LCD electronic timer

Model: H7ET

Display mode: LCD
Count range: 0.00-999.99 hours
Input signal: Short circuit timing
Word height: 6.7mm
Panel size: 48mm × 24mm
Hole size: 22.5mm × 45mm
Operating environment temperature: 0-40 degrees Celsius

Characteristics of H7EC-T LCD electronic timer:
Built in lithium battery, with a standby life of up to 5 years. Both the panel and terminals can be reset

[Tiring timer]HB486 Intelligent Dual Digital Time Controller

2026-6-16 12:25:59

HB486 Intelligent Dual Digital Time Controller

1�� Characteristics

By setting the function number, the instrument can achieve a total of 24 functions, including single delay and double delay cumulative time. Each product function has multiple relay working modes to meet the needs of the control site
The relay action value can be set, and the set value and current accumulated time value will not be lost in case of power failure

2�� Technical parameters

1. Power supply: AC/DC85-260V (other voltages can be customized)
2. Contact life: 105 times
3. Installation method: panel card in

4. Working temperature: 0-50 ��; �� 85%RH
5. Contact capacity: AC250V/3A; DC24V/5A (resistive load)
6. Dimensions: 48 × 48 × 82mm (square) 48 × 48 × 89mm (circle)
7. Hole size: 45 × 45mm (or 35mm rail installation)

[Tiring timer]HM-1,HM-2 Mechanical Timer

2026-6-16 12:25:50

Item No. Model	HM-1,HM-2(RAIL TYPE)
Supply Voltage Operating Voltage	AC110V,220V/50Hz
Dimensions External dimensions	48×48×40mm
Time Rrange Maximum Accumulated Time	0��99,999.99Hours
Net Weight Weight Weight	50g

[Tiring timer]415 Digital stopwatch

2026-6-16 12:25:42

The main functions of the 415 digital stopwatch are:

Single channel: closing and opening time of the air contact, positive voltage application time.
Dual channel: time difference between two signals, start signal: null contact, positive voltage, (optional) stop signal: null contact, positive voltage, (optional) and designed with strong anti-interference circuit.

Main technical specifications of 415 digital electronic seconds:

Instrument form: Handheld and portable
Adaptive signal: air contact point/positive voltage (5-100V)
Measurement range: 0.0001s (seconds) -9999.9s (seconds) divided into four levels of measurement range
Function: Continuous, triggered
Time standard accuracy: �� 5 × 10-5
Measurement error: �� 5 × 10-5 (5/100000) ± 1 last digit
Weight: Approximately 1kg
Power supply: 220V ± 10% 50Hz
Reset mode: manual, automatic (triggered)
Volume: 185 × 142 × 115mm

[Tiring timer]405 Mechanical and electrical stopwatch

2026-6-16 12:25:33

The 405 mechanical electric stopwatch is used to measure the continuous and triggering time of any mechanical contact, measure the action time (suction, release, conversion) of various relays, switches, and contactors, and with additional devices, convert the measured signal into a switch signal to measure various time parameters Anti electromagnetic interference

The 405 mechanical electric stopwatch is used to measure the continuous and triggering time of any mechanical contact, measure the action time (suction, release, conversion) of various relays, switches, and contactors, and with additional devices, convert the measured signal into a switch signal to measure various time parameters Anti electromagnetic interference
Measurement range: 0.01S to 600S
Accuracy: ± 0.006S (seconds) (1 measurement, power frequency standard 50Hz)
Power supply: 110/220V ± 10%, 50Hz
Weight: Approximately 4Kg,
Portable size: 120 × 125 × 195mm

[Tiring timer]401 Mechanical and electrical stopwatch

2026-6-16 12:25:25

401 Mechanical stopwatch is used to measure the continuous and triggering time of any mechanical contact, measure the action time (suction, release, conversion) of various relays, switches, and contactors, and with additional devices, convert the measured signal into a switch signal to measure various time parameters Anti electromagnetic interference

401 mechanical electric stopwatch is used to measure the continuous and triggering time of any mechanical contact, measure the action time (suction, release, conversion) of various relays, switches, and contactors, and with additional devices, convert the measured signal into a switch signal to measure various time parameters Anti electromagnetic interference
Measurement range: 0.01S-60S
Accuracy: ± 0.006S (seconds) (1 measurement, power frequency standard 50Hz)
Power supply: 110/220V ± 10%, 50Hz
Weight: Approximately 4Kg,
Portable size: 120 × 125 × 195mm

[Tiring timer]XY-09B watch timer

2026-6-16 12:25:16

XY-09B watch timer

[Tiring timer]JJ-TH-631 type timer

2026-6-16 12:25:08

JJ-TH-631 Timer

[Tiring timer]XY-748 quartz electronic timer

2026-6-16 12:24:59

XY-748 quartz electronic timer

[Tiring timer]XY-010 type (Apollo) timer

2026-6-16 12:24:51

XY-010 (Apollo) Timer

[Tiring timer]XY009A watch timer

2026-6-16 12:24:43

XY009A watch timer

[Tiring timer]JJ-JS-3 type timer

2026-6-16 12:24:34

JJ-JS-3 timer

[Tiring timer]JJ-TH-2 type timer

2026-6-16 12:24:26

JJ-TH-2 timer

[Tiring timer]JJ-TH-1 type timer

2026-6-16 12:24:16

JJ-TH-1 timer

[Tiring timer]892 type resettable timer

2026-6-16 12:24:08

Working principle and introduction:
The 892 timer is manufactured according to German standard dimensions, with a tight structure, elastic clip installation, and driven by a synchronous motor. Six digit display, with a minimum timing unit of 0.01 hour (36 seconds), and can be manually reset to zero.

Technical parameters of 892 type resetting timer:

display	Six digits, 0-9999, 99h
character height	4mm
power consumption	1W
Operating Temperature	-10�桪+50��
Storage temperature	-20�桪+70��
Electrode connector	2.8*0.8mm
connection	Face frame installation
reset	Manually press the key to reset

Installation dimension diagram of 892 type resetting timer:

892 type resetting timer

[Tiring timer]891 type timer

2026-6-16 12:24:00

Working principle and introduction:

The 891 timer is manufactured according to German standard dimensions, with a tight structure and elastic clip installation. The 891 timer is driven by a synchronous motor and comes in various voltage and frequency specifications to meet different usage requirements. 7-digit display, with a minimum timing unit of 0.01 hour (36 seconds). The 891 timer can continuously count for up to 11 years, and then start counting from zero after reaching full count. It does not have a reset device, so the time value recorded will not be lost.

Technical parameters of 891 timer:

Minimum Timing Unit	0.01 hour (36 seconds)
power consumption	0.5W
Operating Temperature	-10�桪+50��
Storage temperature	-15�桪+70��
Frame specifications	52 * 52mm or diameter 58mm
opening size	45*22mm

Installation dimension diagram of 891 timer:

891 type timer

[Tiring timer]CSY-5 digital timer

2026-6-16 12:23:51

Overview of CSY-5 Digital Timer:

2. Model parameters:

Dimensions (mm)	11811256
Working Voltage	AC:50Hz��220V��380V
specification	999��99S 99M59S 9H59M59S
Equipped with AC contactor
Energy saving efficiency
Ring temperature	-20~+40��

Dimensions (mm) 118 * 112 * 56
Working voltage AC: 50Hz, 220V, 380V
Specifications 999, 99S, 99M59S
9H59M59S
Equipped with AC contactor
Energy saving efficiency
Ring temperature -20~+40 ��

3. Structural features:

4. Installation dimensions:

5. Wiring diagram of CSY-5 digital timer:

[Tiring timer]ZYL03(DHC3L) Digital display timer

2026-6-16 12:23:42

DHC3L series ultra small self-contained power supply timer
􀂄? Features
�? The most universal and inexpensive timer
DIN 48×¡ 24mm standard panel size, expandable to 50×¡ 60mm
�? Internal power supply, no need for external connection, built-in lithium battery
�? With or without voltage input, DC voltage input, and AC voltage input types
�? 6-digit or 8-bit LCD display
�? No mechanical wear, long service life
�? Compliant standards: Q/WDH 02-2003, GB14048.5-2001, IEC60947-5-1:1997

Working Voltage	self-powered	Power outage memory	5 years
Exhaustive time range	99999.9 ? ?999999h59 ? 99h59m59 ? 9999d23 ? 9999h59m59 ?9999h59m	ambient temperature	-��¡4��¡
display mode	6/8-bit LCD display	Installation method	panel-type
cumulative error	¡0.01%	Overall dimensions	2×¡4×¡50mm
Reset method	Terminal short circuit reset, panel button reset	cutout size	22. ×¡45mm

ZYL03 (DHC3L) digital timer

[Tiring timer]ZYL06(DHC6J-L) series digital display timer

2026-6-16 12:23:34

ZYL06 (DHC6J-L) series digital timer

Working Voltage	AC/DC 24V 36V 110V 220V 380V/50HZ allowable voltage fluctuation Range (85% to 110%)	Power outage memory	10 years
Exhaustive time range	999m59s 999h59m 9999. 9m 9999. 9h	ambient temperature	-5�桫45��
display mode	5-digit LED display	Installation method	panel-type
cumulative error	��0.01%	Overall dimensions	48×96×112mm
Reset method	Terminal short circuit reset, panel button reset	cutout size	45×92mm

ZYL06 (DHC6J-L) series digital timer

[Tiring timer]ZYL48(DH48L) Digital display timer

2026-6-16 12:23:25

Working Voltage	AC/DC 24V 36V 110V 220V 380V/50HZ allowable voltage fluctuation Range (85% to 110%)	Power outage memory	10 years
Exhaustive time range	999m59s 999h59m 9999. 9m 9999. 9h	ambient temperature	-5�桫45��
display mode	5-digit LED display	Installation method	panel-type
cumulative error	��1%	Overall dimensions	48×48×124mm
Reset method	Terminal short circuit reset	cutout size	46×46mm

ZYL48 (DH48L) digital timer

[Tiring timer]DH48L series timer

2026-6-16 12:23:17

DH48L series timer

compact size
Beautiful appearance, large display
LED 5-digit large display.
Input signal: contact signal, or AC/DC110~220V signal
Exhaustive time range: can be selected through wiring

1 second~999 minutes and 59 seconds
1 minute~999:59
0.1 to 9999.9 points
0.1 hour~9999.9 hours

DIN48x48mm

[Tiring timer]DHC9J-L type timer

2026-6-16 12:23:09

DHC9J-L type timer

DIN36x72mm

Beautiful appearance, large display
LED 5-digit large display.
Input signal: contact signal, or AC/DC110~220V signal
Exhaustive time range: can be selected through a switch
1 second~999 minutes and 59 seconds
1 minute~999:59
0.1 to 9999.9 points
0.1 hour~9999.9 hours

DHC9J-L type timer

[Tiring timer]DHC6J-L series timer

2026-6-16 12:23:00

DIN48x96mm panel size
LED 5-digit large display.
Input signal: contact signal, or AC/DC110~220V signal
Exhaustive time range: can be selected through a switch
1 second~999 minutes and 59 seconds
1 minute~999:59
0.1 to 9999.9 points
0.1 hour~9999.9 hours

DHC6J-L series timer

[Tiring timer]DHC15L type guide rail installation timer

2026-6-16 12:22:52

DHC15L type guide rail installation timer

Using lithium batteries as power source, no external power supply is required.
LCD display with backlight source
Input control signal: AC/DC110~220V signal
High cost-effectiveness, rail installation
Time range: 1 minute to 999999 hours and 59 minutes

[Tiring timer]DHC3L series timer

2026-6-16 12:22:43

The DHC3L series timer is the most universal timer that displays time at any time.
Using lithium batteries as power source, no external power supply is required. LCD display
Input control signal: contact signal (DHC3L)
AC/DC110~220V signal (DHC3L-A)
High cost-effectiveness.
Time range: 1 second to 999999 hours and 59 minutes
DIN24x48mm

DHC3L series timer

[Tiring timer]THC3L series timer

2026-6-16 12:22:35

THC3L series timer

Working voltage DC3V (built-in)
Operating ambient temperature: -20C-60C
Exhaustive time range: 1S-9999d23h
Display mode: LCD display
Reset method: External terminal reset of panel button
Number of digits displayed: 6
Reset minimum pulse width: �� 0.2S

[Tiring timer]JSL2 digital cumulative timer

2026-6-16 12:22:26

JSL2 digital cumulative timer

model	JSL2
classification	Digital cumulative timer
Specification and variety	Accumulated timing, 6-digit display
Delay range	1s-99h59min59s
	0.01h-9999.99h
	0.1h-99999.9h
Contact type	--
contact capacity	--
Electrical lifespan (AC-12)	--
characteristic	6-digit LCD display, used as an accumulation timing unit in automation control

JSL2 digital cumulative timer

[timer]APT1 Programmable Timer

2026-6-14 10:58:55

APT1 Programmable Timer

Seven days a week, programmable timed loop control can be implemented, with 10 sets of ON and 10 sets of OFF set for each day/week, and the machine can be turned on and off in different time periods
15 week combinations to choose from
Equipped with rechargeable batteries, it can maintain program memory for a long time during power outages

Size (mm)		48H×48W×84D
Installation and its base		Exposed type: P2CF-08 Embedded type: Y-50&US-08 or Y-50&P3G-08
rated voltage		100~240VAC 50/60Hz
Voltage Range		85~110% of rated voltage
time range		1min~168hr
controlled output		1C 15A
Setting error		<±2 sec/day
power consumption		3VA
Return time		0.5sec max
longevity fate	Mechanics	5×10^6 times
	Electrical	10^5 times
Return time		0.5sec max
power consumption		3VA
Environmental temperature for use		-25��~+60��
Environmental humidity for use		<95%RH
weight		130g

APT1 Programmable Timer Wiring Diagram Program Overlapping Output Timing Diagram

APT1 programmable timer appearance size diagram

APT1 Programmable Timer

[length meter]JC326 Type Length Measuring Device

2026-6-14 10:53:34

The JC326 length measuring device is a recorder used for measuring distance and length. Especially widely used in measuring the distance and length of uneven and curved ground surfaces, it is
A very convenient and practical measuring instrument.

Main parameters of JC326 length measuring instrument:
1. Maximum display value: 99999.9
2. Maximum speed: 360 revolutions per minute
3. Environmental temperature: -15 ��~+55 ��
4. Accuracy: �� 99%

[Time-controlled switch]NKG-3 Time controlled switch

2026-6-14 10:45:52

NKG-3 time control switch

[Time-controlled switch]KG-10 microcomputer conversion switch

2026-6-14 10:24:13

model	KG-10
power supply voltage	220VAC 50-60HZ ±15%
Internal battery voltage	3.6VDC
Electricity consumption	About 1.5VA
controlled output	25A 250VAC (resistive load)
display output	LCD display
Travel time error	Less than 1 second per day
switching times	Daily/weekly cycle 10sixteenSecondary switch
ambient temperature	-25 �� to 60 ��
ambient humidity	45 to 85% RH
mechanical life	At least 3000000 times
Weight and size	About 410 grams, 120 × 74 × 52mm
Installation method	Installation type

Comparison Table of Sunday Signs in Chinese and English
MO	TU	WE	TH	FR	SA	SU
Monday	Tuesday	Wednesday	Thursday	Friday	Saturday	Sunday

KG-10 microcomputer conversion switch

[timer]XY-A2 Electronic Timer

2026-6-14 10:24:02

Features:

1. Timer is a power switch control device composed of a single-chip microprocessor as the core and electronic circuits.
2. This product is widely used for automatic power on and off of household appliances.
3. It can automatically control various household appliances and lighting fixtures such as rice cookers, electric water heaters, air conditioners, etc.

Characteristics:

Model:	XY-A2
Power supply voltage:	220VAC 50~60HZ ±15%
Internal battery voltage:	1.5VDC AA7#
Electricity consumption:	��1.5VA
Control output:	10A, 250VAC (resistive load) 16A, 250VAC (resistive load)
Display device:	LED display
Travel time error:	Less than 1 second per day
Switching frequency:	Switch 1-16 times per day/week cycle
Ambient temperature	-10��~60��
ambient humidity:	45~85��RH
Mechanical lifespan:	�� 3000000 times
Installation method:	International single-phase three wire plug socket type

XY-A2 Electronic Timer

[timer]JFT-9A Electric vehicle charging timer

2026-6-14 10:23:44

JFT-9A electric vehicle charging timer applicable scope:

Charging timing control for electric bicycles, electric tricycles, mobile phones, and various battery packs; Countdown automatic control for various household appliances, etc.
Working voltage: 110-250V, load capacity: 1000W; power consumption:<1W; timing accuracy: ± seconds per hour; Punctuality time: 1-9 hours; Environmental temperature: -10~40 ��; Relative temperature: �� 90%; Atmospheric pressure: 86-106kPa.

Product Introduction:
The JFT-9A electric vehicle charging timer is a high-tech power timing management product mainly based on an 86R series microcomputer chip, equipped with LED display. It is powered by a high-performance switch power supply, ensuring accurate timing and stable and reliable switch performance; Strong voltage adaptability, working normally from 100V to 250V. The use of this product can completely solve the damage caused by overcharging of electric vehicle battery packs (various types of battery packs), as well as the damage to electricity bills caused by long-term idle consumption of high-power chargers that are turned off at regular intervals, the damage to electricity bills caused by long-term idle consumption of high-power chargers that are turned off at regular intervals, and the loss of electricity bills caused by long-term idle consumption of high-power chargers that are turned off at regular intervals (the maximum power of the charger is 300W, 3.3 hours per kilowatt hour). Therefore, using this product can extend the service life of the battery pack (compared to charging for more than 10 hours per day) for more than six months and save more than 50% of electricity; It is a green product that saves electricity and energy, and a good helper for families.

Usage:
Insert the timer into the power socket like a regular power plug, and then plug the charger into the timer socket. At this moment, the digital tube lights up. Display '0'; Indicates that the power is not connected. To charge, press and hold the setting button for 2 seconds; The digital tube flashes, then press the setting button to select the time to charge, press once to add one hour, press until 9 and return to 0 for cycling; After selecting the time (such as 4 hours), stop operating for 3 seconds. The decimal point in the digital display lights up, indicating that the circuit is connected and the charging timer starts. Every hour, the number decreases by one until it displays "0"; Indicate the end of charging and half turn off the charger power. When charging, if you need to adjust the charging time, you can long press the setting button for two seconds to make the characters flash and reset the time. To turn off the power, you can set the number to zero and it will be half closed; The button has a lock protection function, and if not pressed for more than two seconds, it will not have any adjustment effect.

[timer]JF-T03 socket electronic timer

2026-6-14 10:23:30

JF-T03 socket electronic timer

[Time-controlled switch]JF-T02 microcomputer time control switch

2026-6-14 10:23:07

JF-T02 microcomputer time control switch
Technical parameters:
Execution standard: GB/T14536.1-1998 GB/T14536. 8-1996
Rated voltage: 220V~50Hz
Rated current: JF-T02 type 10A (resistive)
JF-T03 type 16A (resistive)
Working temperature: -20~70 ��
Timing error: ��± 1 second/day
3�� System Function Introduction:
1. LCD full screen characters, as shown in the figure on the right:
2. When the machine is in clock mode, press the "Mode" button to set the working state to the desired mode.
The setting sequence is: off �� automatic �� on �� loop �� Zz (countdown)
Off - The power output is frequently turned off.
Automatic - The power output is in the timed on/off program state set by the row code.
On - The power output is frequently turned on.
Cycle - The power output works in a cycle according to the length of the on time and interval time (off time) you set.
Zz - The power output is in a countdown (delayed shutdown) state, with a maximum duration of 23 hours and 59 minutes and a minimum duration of 1 minute.
C - Pressing this key will clear all stored data and restore the system to its initial state.

[Time-controlled switch]JFT16 microcomputer time control switch

2026-6-14 10:13:35

The JFT16 microcomputer time control switch can automatically turn on and off the power of various electrical devices according to the user's set time. The controlled objects can be streetlights, neon lights, advertising sign lights, production settings, broadcasting and television equipment, and all circuit devices and household appliances that need to be turned on and off at regular intervals.

JFT16 microcomputer time control switch performance indicators
1. Working voltage 220V/50Hz
2. Applicable voltage range: 160V~240V
3. Switch capacity resistive 25A, inductive 20A
4. Power consumption<1W
5. Not affected by power outages, internal automatic charging
6. Up to 10 times a day can be set for manual and automatic use, with a maximum of 10 times for opening and closing
7. The switch time can be cycled daily or weekly
8. The longest control time is 168 hours and the shortest control time is 1 minute
9. Environmental temperature -20~60 ��
10. The timing error is less than 0.5 seconds per day
11. Environmental humidity<95%
12. Net weight 430g

Operating instructions
1�� Timer setting
When users read the manual, please recognize the buttons on the product panel and operate them while reading.
Section 1, Clock Adjustment: (If it needs to be readjusted after leaving the factory) Press and hold the "Clock" button while pressing the "Week Calibration" button, "Time Calibration" button, and "Minute Calibration" button. Section 2, Setting the First Start: Press the "Timer" button once, the LCD screen will appear (as shown in Figure 1), then press the "Timing" and "Calibration" buttons to enter the first start time.
Section 3, Set the First Shutdown: Press the "Timer" and "Calibration" keys again to enter the first shutdown time.
Section 4: Continue pressing the "timer" button, and the lower left corner of the display screen will sequentially display (2 on 2 off... 6 on 6 off... 10 on 10 off). Refer to steps 2 and 3 to set the time for each subsequent opening and closing. If you only open or close once a day, you must press the "cancel/restore" button to completely erase the storage time of (2 on 2 off... 6 on 6 off... 10 on 10 off), and display the "--: --" pattern on the LCD screen.

[Time-controlled switch]KG316T-6 Microcomputer six output time control switch

2026-6-14 10:13:27

KG316T-6 microcomputer six channel output time control switch

[Time-controlled switch]TB118,TB178 Time controlled switch

2026-6-14 10:13:19

TB118, TB178 time control switch precautions

Do not use in the following situations.
Otherwise, it may become a cause of misoperation, malfunction, or leakage.
-Places below 10 �� or above+50 ��
Outdoor places that are directly exposed to rain or sunlight
The place where dew condenses
Places with corrosive gases such as sulfite gas or ammonia gas
Places with heavy humidity or high dust content
Places where vibration or impact occurs
Places where vibration or impact occurs
Places with strong high-frequency clutter, electric and magnetic fields
The composition of the output circuit is the same circuit type (with voltage contact output).
The output voltage on the output terminal is the same as the power supply voltage.
Please do not confuse the power terminal with the output terminal.
Otherwise, it will become the cause of load circuit breakage, misoperation, and malfunction.
In situations where the load capacity exceeds the rated load, or where the load is a three-phase load, please use equipment such as electromagnetic contactors.
After the construction is completed, please fully confirm the correctness of the wiring before connecting the main power supply for trial operation.

[Time-controlled switch]Quartz time controlled switch

2026-6-14 10:13:10

The SDK-2/3 quartz time control switch is made by introducing advanced foreign technology and using imported quartz resonators and CMOS electronic components. It has precise timing, stable and reliable operation, and is a new product in automatic timing control instruments in recent years. In recent years, this product has been sold throughout the country and is highly welcomed by users.

The SDK-2/3 quartz time controlled switch can be used directly or in conjunction with AC contactors to automatically switch single-phase or three-phase circuits for user control of various electrical appliances. It is suitable for street lamps, neon lights, advertising light boxes, electric bells, ovens, electric furnace bellows, power supply department peak electricity, and automation equipment. It can be used for user automatic tripping and closing, as well as automatic opening of the supply function for the public.

Main technical indicators
1. Travel time accuracy �� 1 second/day;
2. Time control accuracy �� ± 5 points;
3. The minimum switch period is 1.5 hours; The longest switch period is 24 hours;
4. The operating environment temperature ranges from -20 �� to+50 ��;
5. Contact rated voltage AC 100V, 220V, 380V;
6. Contact rated current (resistive) AC 100V 7.5A, 220V 5A, 380V 2A;
7. Quartz clock power supply DC 1.5V;
8. Dimensions: 190 × 143 × 75mm

Usage
1. Loosen the regulator screws and fix the regulator on the clock face plate as needed. A pair of regulators form an open/close control period, and 1-2 open/close periods need to be controlled every day. Fix 1-2 pairs of regulators on the clock face plate, and after fixing them, the excess regulators must be unscrewed to control the time starting at that time. For example, to control the street lights, turn them on at 7 pm that night and turn them off at 5 am the next morning. Fix the black regulator at the 7:00 pm mark and the red regulator at the 5:00 am mark. He automatically turns off and on the power supply at the set time every day.
2. Rotate the clock face clockwise (strictly prohibited from reversing), first place the regulator indicating the starting control time on the upper right side of the black indicator needle, then control the counterclockwise movement of the hexagonal cam (strict standard reverse movement) to make the clock switch outside the state before it needs to be opened or closed, and make one tooth in the hexagonal cam match the position indicated by the black indicator needle (at this time, the adjusting screw should just move the hexagonal cam to make the clock switch in the starting on/off state). When the starting control time is reached, install the 1.5V battery into the battery box, and the quartz clock will start working.

Precautions for use
1. The polarity of the 1.5V battery used in quartz clocks should not be reversed and should be replaced regularly. Typically, one high-performance No.1 battery can last for one year.
2. It is strictly prohibited to reverse the dial and hexagonal cam of the clock, otherwise it may damage the components.
3. After a long period of use, it should be readjusted to eliminate accumulated errors.
4. The installation location should avoid exposure to direct sunlight, cold, strong magnetic fields, corrosive gases, or environments with relative humidity not exceeding 85%.
5. The rated current value indicated on this product refers to resistive loads. If used for inductive loads such as high-power motors, it must be matched with AC contactors.

SDK-2/3 quartz time control switch

[Time-controlled switch]TB10A(TB1025) microcomputer time control switch

2026-6-14 10:13:02

The TB10A (TB1025) microcomputer time control switch adopts PJ-62 timing module, which can automatically turn on and off the power of various electrical equipment according to the user's set time. Widely used for programming, timing, and automatic control of electrical equipment in fields such as street lamps, neon lights, advertising lights, rice cookers, aerators, sprinklers, preheating and pre cooling devices, etc.

2�� The screen display conforms to the explanation

technical parameters
Rated voltage: 220V/50Hz
Applicable voltage range: 160-240V
Rated current: pure resistive load 30A, inductive load 20A
Time control range: 1 minute to 168 hours
Set frequency: 10 or 2 sets of programming scheduled per day (e.g. setting 9 o'clock on and 10 o'clock off is called 1 set of programming)
Control cycle: can be controlled daily or weekly (can achieve different timing settings for each day within a week)
Timing error:<± 0.5 seconds/day
Operating temperature: -30 ��~60 �� Strong moisture and dust resistance
Installation method: three fixing methods: guide rail, suction wall, and hanging installation
Dimensions: 115 × 75 × 52mm
Wiring method: Lock type terminal wiring, in compliance with industrial standards.
Timing method: 24-hour clock

Keyboard lock, clock calibration, timing settings
Long press the [Cancel/Resume] key for about 3 seconds to activate or deactivate the keyboard lock. "" represents the keyboard lock symbol. Clock calibration: Press and hold the [Clock] key, and simultaneously press the [Hour], [Minute], and [Week] keys to calibrate the clock and week.
The timing setting steps are as follows:

step	button	Set project
one	Press the [Timer] key	Enter the first set of timed on settings (display 1)^open��
two	Press the [Week], [Hour], and [Minute] keys respectively	Set opening time (week, hour, minute)
three	Reinstall the [timer] button	Enter the first set of timed off settings (display 1)_close��
four	Press the [Week], [Hour], and [Minute] keys respectively	Set the closing time (week, hour, minute)
five	Repeat steps 1, 2, 3, and 4	2-10 sets of switch times can be set
six	Press the [Timer] key continuously	Check if the switch time and week of each group are as required. If they are incorrect, repeat steps 2 and 4
seven	Press the [Auto/Manual] key	Adjust the switch ("��") to the current state ("on" or "off") and then return it to the "automatic" position
eight	Press the [Clock] key	Set the end time to enter the clock display state

Note: If you do not need to set 10 groups, use the [Cancel/Restore] key to eliminate the excess number of groups. If "--: --" is displayed, it indicates elimination. Pressing the [Cancel/Restore] key again can restore the original time setting before elimination.
Check: Press the [Timer] key continuously to check if the set time and week for each group are correct.
Manual control: Press the [Manual/Auto] button to directly turn on or off the power. When not in the "on" state, keep it on; when in the "off" state, keep it off; When in the "direct action" state, the direct action executes the set time program.
Pressing the [Clock] key or not pressing any key for 30 seconds in a non clock display state can restore the current settings to the clock display state.
If you need a daily control cycle, please make sure to set the scheduled time (on and off) to the full display state of the week. As shown in the picture:

wiring diagram

Product execution standard: GB14048.3-93
Precautions
If the display screen shows weakening, please replace the battery; If the setting content disappears, it needs to be reset.
Please do not repair, disassemble or modify this product by yourself.
Do not let this product come into contact with oil or water.
This product only requires one 1.5V battery for power supply (front mounted, easy to replace), and the empty space of the other battery is reserved for battery replacement, which can prevent power loss and program loss.

[timer]JF15B,TP8B16(DHC15B) Rail type multifunctional programmable timer

2026-6-14 10:12:53

summary:
1. 35mm standard guide rail installation, compact size, beautiful appearance, is an updated product of KG316T;
2. Real time control, 7-day or 24-hour preset cycle timing control;
3. One output, 8-stage on/off timing settings, 10 date combination modes;
4. The longest setting is 168 hours, and the shortest timing is 1 minute;
5. LCD display, backup high-capacity rechargeable battery, normal operation during power outage;
6. Switch between 12/24 hours, default is 24 hours.

Model Description

JF15B, TP8B16 (DHC15B) rail type multifunctional programmable timer technical parameters

Rated control voltage: AC220V ± 10% 50Hz	Number of contacts: 1 set for conversion	Timing error: �� 2 seconds/day (25 ��)
Switching frequency: 8 times on and 8 times off	Power consumption: 4.5VA (max)	Time control range: 1 minute to 168 hours
Power outage duration �� 15 days (after continuous power on for 48 hours)		Minimum timer time: 1 minute
Contact capacity: Resistive load: 16A/250VAC (COS ��=1); Inductive load: 2.5A/250VAC (COS ��=0.6); Control light: 1000W		Electrical lifespan: 100000 cycles (rated load) Mechanical lifespan: 1 million cycles
Environmental temperature: 35-85% RH	Operating environment temperature: -10~55 ��	Weight: Approximately 125g

Operating instructions
1. To start using the timer, please connect the rated control power supply and press the reset button "RESET".
2. Set the timer for the first time in 24-hour mode. If you want to switch to 12 hour mode, press and hold the "" key for 5 seconds, and the LCD will display "AM"; If you want to switch to 24-hour mode, please hold down the "" key for 5 seconds to return to 24-hour mode.
3. Programming Settings

step	button	Programming Content
one	Press' P '	When "1ON" appears, set the first group activation time;
2*	Press' D+'	Set a day or days of the week to activate;
three	Press' H+/M+'	Set the hours and minutes for the activation time;
four	Press' P '	Display "1OFF" and display "", set the first group shutdown time
five	Press' P '	Set a day or days of the week to close;
six	Press' H+/M+'	Set the hour and minute when closing;
seven	Repeat steps 2-6	Set 2-8 sets of timed activation and deactivation times;
8**	Press��	Setup completed

Note:
To cancel a certain timing setting, please press the "MANUAL" button, and the LCD will display "----=----"; Pressing the 'MANUAL' key again will return to the previous settings.
*10 date combination modes: (1. MO TU WE TH FR SA SU; 2. MO TU WE TH FR; 3. SA SU; 4. MO; 5. TU; 6. WE; 7. TH; 8. FR; 9. SA; 10. SU).
**If you do not need to set the 8-segment timer, please press "" to complete the setting and return to the real-time clock state.
4. Real time clock setting
(1) Simultaneously press "" and "D+" to set up rounding until the current week is displayed;
(2) Simultaneously press "" and "H+" to set up rounding until the current hour is displayed;
(3) Simultaneously press "" and "M+" to set up rounding until the current minute is displayed;
(4) Press' MANAUL 'to display' ON AUTO 'or' AUTO OFF '; If the automatic timing initial state needs to be turned on, select "ON AUTO"; if the automatic timing initial state needs to be turned off, select "AUTO OFF".
5. Press "MANAUL" to change the switch state, "ON" for long on, "OFF" for long off.

Overall dimensions

Note:
The date mode for setting the opening and closing time of the same period should be consistent;
Use according to the requirements specified in the technical parameters;
Internally containing high-capacity rechargeable batteries, please do not disassemble or put into fire.

[Time-controlled switch]KG316YG(TB10 microcomputer time control switch

2026-6-14 10:12:45

The KG316YG (TB10 type) microcomputer time control switch can automatically turn on and off the power of various electrical equipment according to the user's set time. The controlled objects can be streetlights, neon lights, advertising signs, production equipment, broadcasting and television equipment, and all other circuit devices and household appliances that need to be turned on and off at regular intervals.

performance metrics
Standard working power supply 220V/50Hz
Applicable voltage range: 160V~240V
Switching Capacity Resistance 25A
Power consumption<4W
Time control range: 1 minute to 168 hours
Environmental temperature -10~50 ��
Timing error<± 2 seconds/day
Environmental humidity<95%
Dimensions 126 × 88 × 51mm
Weight 510g
There are 10 sets of switch times, which can be used manually or automatically;

Operating instructions
1. First, check if the clock display is consistent with the current time. If recalibration is required, while holding down the "Clock" button, press and hold the "Calibrate Week", "Calibrate Time", and "Calibrate Minute" buttons respectively to adjust the clock to the current accurate time:
2. Press the "timer" button once, and the word "1 on" will appear at the bottom left of the display screen (indicating the first time it was turned on). Then press "School Week" to select work modes such as six day work system, five-day work system, three-day work system, daily same, daily different, etc., and then press the "School Hour" and "School Minute" keys to enter the desired start time;
3. Press the "timer" button again, and the word "1 off" will appear at the bottom left of the display screen (indicating the first time it was turned off). Then press the "school week", "school hour", and "school minute" buttons, and enter the desired date and time for turning off (note: the date of turning off must correspond to the date of turning on);
4. Continue pressing the "timer" button, and the lower left corner of the display screen will show "2 on, 2 off, 3 on, 3 off,..., 10 on, 10 off" in sequence. Refer to steps 2 and 3 to set the switch time for each subsequent switch;
5. If 10 sets of switches do not need to be set every day, the "Cancel/Restore" button must be pressed to eliminate the excess time of each set and display the "--: --" pattern on the display screen (not 00:00);

KG316YG (TB10 type) microcomputer time control switch

[Time-controlled switch]JF-TGK01 type microcomputer time control switch

2026-6-14 10:12:36

The JF-TGK01 series microcomputer time control switch is a highly integrated electronic switch device used for power switch program control. It can set one output to control 8 different time switches (or two outputs can simultaneously turn on or off the power, or alternately turn on or off the power, with a total of 16 different on/off control programs), and can set on/off control programs within one week. This machine has a memory function, which can maintain the time display and the original set product of various control programs for more than 6 months even when disconnected from the mains power supply. It can control various electrical devices that require time control, such as street lamps, billboards, light boxes, radio and television equipment, garden irrigation equipment, lighting in breeding farms and yards, lighting in tourist attractions, household appliances, etc. It is a safe and reliable electronic switch that is controlled by weak electricity, and is new and intelligent. For example, when used in conjunction with AC contactors, it can control three-phase high-power electrical equipment.

technical parameters
Execution standard: GB/T1436. 1-1998��
GB/T1453.8-1998��
Rated voltage: 220V-50HZ
Rated current: 20A (resistive)
Working temperature: -10 ��~55 ��
Timing error:<± seconds/day

Introduction to System Functions
A�� The time control switch has 7 operation keys: week, hour, minute, unlock, clock, setting, and mode;
B�� The full screen characters and external dimensions of the LCD are shown in Figure 1;
C�� Pressing the "Mode" button in the time display state of this machine can set the working state to the desired mode, and the setting order is:
(Note: To unlock, press the "unlock" button four times in a row.)
OFF Auto ON
OFF - Power output, in the off state.
Auto power output, in the off state.

JF-TGK01 microcomputer time control switch

[Time-controlled switch]TB-10 microcomputer time control switch (optical time control)

2026-6-14 10:12:28

The TB-10 microcomputer time control switch (light time control) can automatically turn on and off the power of various electrical equipment according to the user's set time. The controlled objects can be streetlights, neon lights, advertising signs, production equipment, broadcasting and television equipment, and all other circuit devices and household appliances that need to be turned on and off at regular intervals.

performance metrics
Standard working power supply 220V/50Hz
Applicable voltage range: 160V~240V
Switching Capacity Resistance 25A
Power consumption<4W
Time control range: 1 minute to 168 hours
Environmental temperature -10~50 ��
Timing error<± 2 seconds/day
Environmental humidity<95%
Dimensions 126 × 88 × 51mm
Weight 510g
There are 10 sets of switch times, which can be used manually or automatically;

Operation Instructions for TB-10 Microcomputer Time Control Switch (Light Time Control)
1. First, check if the clock display is consistent with the current time. If recalibration is required, while holding down the "Clock" button, press and hold the "Calibrate Week", "Calibrate Time", and "Calibrate Minute" buttons respectively to adjust the clock to the current accurate time:
2. Press the "timer" button once, and the word "1 on" will appear at the bottom left of the display screen (indicating the first time it was turned on). Then press "School Week" to select work modes such as six day work system, five-day work system, three-day work system, daily same, daily different, etc., and then press the "School Hour" and "School Minute" keys to enter the desired start time;
3. Press the "timer" button again, and the word "1 off" will appear at the bottom left of the display screen (indicating the first time it was turned off). Then press the "school week", "school hour", and "school minute" buttons, and enter the desired date and time for turning off (note: the date of turning off must correspond to the date of turning on);
4. Continue pressing the "timer" button, and the lower left corner of the display screen will show "2 on, 2 off, 3 on, 3 off,..., 10 on, 10 off" in sequence. Refer to steps 2 and 3 to set the switch time for each subsequent switch;
5. If 10 sets of switches do not need to be set every day, the "Cancel/Restore" button must be pressed to eliminate the excess time of each set and display the "--: --" pattern on the display screen (not 00:00);

[length meter]Z94-F Type Five Position Length Counting Meter Coder

2026-6-14 10:11:20

Z94-F Type Five Position Length Counting Meter Coder

Counting range	0-9999.9
gear ratio	1 : 3
Maximum counting speed	200 times/minute
temperature range	-10 degrees to 60 degrees

Z94-F Type Five Position Length Counting Meter Coder

[length meter]Z96-F Type Five Position Length Counting Meter

2026-6-14 10:11:12

The Z96-F five position length measuring counter is a counter used for measuring length and various mechanical transmissions, generally used in textiles Printing and dyeing Plastic film Record of bulk length of artificial leather and other materials. (1) This counter is a five digit number. When recording a length of 1m (or 1 code), it rolls three times and the counter number displays 1, and so on until it reaches decimal But it cannot be counted in reverse. (2) This counter is equipped with a reset mechanism, which uses a press to reset. After rotating one revolution, all numbers are "0", and then the second stage of counting is performed.

Technical parameters of Z96-F five position length measuring and counting meter:

Counting range	0-9999.9
gear ratio	1 : 3
Maximum counting speed	200 times/minute
temperature range	-10 degrees to 60 degrees

Z96-F Type Five Position Length Counting Meter

[timer]JHK-01 series infrared sensing delay switch

2026-6-14 9:57:41

Performance indicators:
Working voltage: 160-250V (AC) Static power consumption current:<0.3mA
Environmental working temperature: -20 ��~50 �� Automatic delay time: 20 seconds~6 minutes
Control load power: 5-200W Induction distance: 6 meters
Induction angle: 140 degree cone angle load range incandescent lamp/energy-saving lamp/exhaust fan
Control illumination: 5LUX-500LUX (adjustable) Appearance size: 86X86X25mm

Specification Model	terminal	Emergency control	neutral wire	power control	load type	explanation
JHK-01	two	nothing	nothing	��100W	Incandescent/fluorescent lamp
JHK-01D	three	nothing	have	��200W	Any load
JHK-01/ED	four	Strong cutting type	have	��200W	Incandescent/fluorescent lamp
JHK-01/EMD	three	Strong cutting type	nothing	��200W	Incandescent/fluorescent lamp
Overall Dimensions	86X86X25mm		Fixed hole spacing		60 millimeters

JHK-01 series infrared induction delay switch

[timer]JHK-11 series infrared sensing delay switch

2026-6-14 9:57:32

Working voltage: 160-250V (AC) Static power consumption current:<1ma
Environmental working temperature: -20 ��~50 �� Automatic delay time: 20 seconds~6 minutes
Control load power: 5-200W Induction distance: 6 meters
Induction angle: 140 degree cone angle load range incandescent lamp/energy-saving lamp/exhaust fan
Control illumination: 5LUX-500LUX (adjustable)

Specification Model	terminal	Emergency control	neutral wire	power control	load type	explanation
JHK-11	three	nothing	have	��200W	Incandescent/fluorescent lamp
JHK-11/ED	four	Strong cutting type	have	��200W	Incandescent/fluorescent lamp
Overall Dimensions	�� 90x38mm		Fixed hole size		65 millimeters

JHK-11 series infrared induction delay switch

[Time-controlled switch]SGKII-2 Sound light controlled delay switch

2026-6-14 9:55:32

SGKII-2 sound light control delay switch

Working voltage: 160-250V AC
Light control sensitivity:>1-4Lx off
Static current:<2mA (annual power consumption<0.3 kWh)
Environmental temperature: -25 �� -55 ��
Control power: �� 60W
Delay time: 60 seconds ± 30% or user selectable
Voice control sensitivity: 65-70db
Control load: resistive (incandescent lamp)
Emergency control: None

Specification Model	terminal	Emergency control	neutral wire	power control	load type	explanation
SGKI-1	two	nothing	nothing	60W	incandescent lamp
SGKI-2	two	nothing	nothing	60W	incandescent lamp	discontinue production
SGKII-2	two	nothing	nothing	60W	incandescent lamp
SGKII-3	two	nothing	nothing	60W	incandescent lamp
SGKI-1	Overall Dimensions		60X40X23 millimeter		Fixed hole spacing	60 millimeters
SGKI-2	Overall Dimensions		70X45X28mm		Fixed hole spacing	47.5 millimeters
SGKII-2	Overall Dimensions		86X86X25mm		Fixed hole spacing	60 millimeters
SGKII-3	Overall Dimensions		110X85X25mm		Fixed hole spacing	80 millimeters

SGKII-2 sound light control delay switch

[Time-controlled switch]SGKI-1 Sound light controlled delay switch

2026-6-14 9:55:24

Working voltage: 160-250V AC
Light control sensitivity:>1-4Lx off
Static current:<2mA (annual power consumption<0.3 kWh)
Environmental temperature: -25 �� -55 ��
Control power: �� 60W
Delay time: 60 seconds ± 30% or user selectable
Voice control sensitivity: 65-70db
Control load: resistive (incandescent lamp)
Emergency control: None

Specification Model	terminal	Emergency control	neutral wire	power control	load type	explanation
SGKI-1	two	nothing	nothing	60W	incandescent lamp
SGKI-1	Overall Dimensions		60X40X23mm		Fixed hole spacing	60 millimeters

SGKI-1 sound light control delay switch

[Time-controlled switch]SGKI-3 series sound light controlled delay switch

2026-6-14 9:55:15

Working voltage: 160-250V AC
Light control sensitivity:>1-4Lx off
Static current:<2mA (annual power consumption<0.3 kWh)
Environmental temperature: -25 �� -55 ��
Control power: �� 60W (ordinary type) �� 200W (special type)
Delay time: 60 seconds ± 30% or user selectable
Voice control sensitivity: 65-70db
Control load: resistive (incandescent lamp)/energy-saving lamp (special supply type)
Emergency control: optional

Specification Model	terminal	Emergency control	neutral wire	power control	load type	explanation
SGKI-3	two	nothing	nothing	60W	incandescent lamp
SGKI-3/E	four	Strong cutting type	have	60W	incandescent lamp
SGKI-3/D	three	nothing	have	200W	Incandescent/fluorescent lamp	custom-made
SGKI-3/ED	four	Strong cutting type	have	200W	Incandescent/fluorescent lamp	custom-made
Vertical appearance dimensions	62x60x35mm		Fixed hole spacing		53 millimeters

SGKI-3 series sound light control delay switch

[Time-controlled switch]CMY series touch delay switch

2026-6-14 9:54:50

CMY series touch delay switch

Specification Model	terminal	Emergency control	neutral wire	power control	load type	explanation
CMY-1	two	nothing	nothing	60W-100w	incandescent lamp
CMY-1/e	three	controlling	nothing	60W-100W	incandescent lamp
CMY-1/ET	three	Strong cutting type	nothing	100-200w	incandescent lamp	Latest Patent
CMY-1/D	three	nothing	have	�� 200W	Any load	custom-made
CMY-1/ED	four	Strong cutting type	have	�� 200W	Incandescent/fluorescent lamp	custom-made
CMY-1/ds	two	nothing	nothing	�� 120W	Incandescent/fluorescent lamp	Be sure to specify the type of load
CMY-1/EMd	three	Strong cutting type	nothing	�� 200W	Incandescent/fluorescent lamp	Latest Special
CMY-1/Dt	three	nothing	have	�� 200W	Any load	Sound and light control sensitivity, adjustable delay time
Overall Dimensions	86X86X25mm		Fixed hole spacing		60 millimeters

CMY series touch delay switch

[timer]DSKG-16 electronic timer

2026-6-14 9:54:42

The DSKG-16 electronic timer can automatically turn on and off the power of various electrical devices according to the time set by the user. The controlled objects can be street lights, neon lights, billboard lights, production equipment, household appliances (rice cookers, water heaters, water dispensers, electric heaters), timed control of various chargers, as well as broadcasting and television equipment.

Performance indicators:

Standard working power supply 220V/50Hz
Timing error �� ± 2 seconds/day
Applicable power range: 180-240V
Environmental temperature -25~60 ��
Switching capacity, resistive 7A, inductive 3A
Relative temperature<95%
Power consumption<1VA
Dimensions 98 × 70 × 55mm
Time control range: 1 minute to 168 hours
Weight 120g
There are 16 sets of switch times, both manual and automatic

[Time-controlled switch]JSK-2S microcomputer time control switch

2026-6-14 9:54:33

JSK-2S microcomputer time control switch

Specification Model	terminal	power control	load type
JSK-2S	two	2000W	arbitrary	AC220V
JSK-2S (specially made)	two	According to voltage	arbitrary	12V 24V 110V
Overall Dimensions	96×44×53mm	Fixed method: rail type

Standard working power supply: 220VAC/50Hz 12VDC 24VDC Timing error: �� ± 2 seconds/day
Allowable power range: ± 10% Environmental temperature: -10~40 ��
Rated output voltage: Operating power supply voltage Rated load current: 10A
Time control range: 1 minute to 168 hours. Keyboard automatic locking: available
Switch adjustable frequency: 20 times/day (2012 latest model) Weight: 147g

[Time-controlled switch]JXH-1 Loop timing controller

2026-6-14 9:54:25

JXH-1 Loop Timing Controller

1. Working voltage: 160-240vac or 12vdc, 24vdc (customized)
3. Time setting range: 1 second to 23 hours, 59 minutes, and 59 seconds Working temperature: -20 ° C to+60 ° C
4. Working mode: single timed on/off, single timed off/loop timed
5. Working temperature: -25 ° C to+80 ° C
6. Relative humidity<95%
7. Timing error: ± 1 second/day
8. Output control power: 3000w

Specification Model	terminal	power control	load type
JXH-1	four	3000W	arbitrary	220VAC
Overall Dimensions	125×82×68mm	Fixed hole size	68X122MM

JXH-1 Loop Timing Controller

[Time-controlled switch]JSK-3 type microcomputer time control switch

2026-6-14 9:54:16

The JSK-3 microcomputer time control switch can automatically turn on and off the power of various electrical equipment according to the user's set time. The controlled objects can be street lamps, neon lights, advertising sign lights, production equipment, broadcasting and television equipment, and all electrical and household appliances that need to be turned on and off at regular intervals.

JSK-3 microcomputer time control switch can be customized according to user requirements for 12V, 24V, 36V AC/DC working products. Conventional products do not have light controlled rain control probes, which can be installed according to requirements. The product model for installing light control probes is JSK-3/G, and the product model for installing rain control probes is JSK-3/Y.

2�� Main technical indicators:
Applicable power range: 160-240VAC, 50/60/Hz Timing error: �� ± 2 seconds/day
Single switch capacity: resistive 20A inductive 16A dual switch capacity: 2 × 5A
Relative humidity:<95% Environmental temperature: -10 to+60 ��
Time control range: 1 minute to 168 hours Power consumption:<1VA
There are 10 sets of switch times, both manual and automatic. Weight: 365 grams

3�� Instructions for use:
Clock status setting/adjustment:
On the clock display interface, hold down the [Clock] key while pressing the [Hour], [Minute], or [Week] keys to adjust the clock or week; Press the [Auto/Manual] button to switch between [On/Auto/Off] states (when pressed to the "On" state, the system will always have output; when pressed to the "Off" state, the system will turn off the output; when pressed to the "Auto" state, the system will execute the set time switch program, and should be placed in the "Auto" position during normal operation).
§ Timer state setting/adjustment:
1. After unlocking the keyboard, press the [Timer] key to enter the timer state. Each time you press the [Timer] key, you will enter the next set of timer settings interface; The JSK-3A model does not have a keyboard lock, while the JSK-3B model has a keyboard lock. The time control switch has an automatic keyboard lock function. To start the operation, long press the "unlock" button for 3 seconds to make the lock icon in the bottom left corner of the screen disappear,
If you press the [Timer] key continuously: 1 on �� 1 off �� 2 on �� 2 off ��... 9 on �� 9 off �� 10 on �� 10 off �� Clock interface �� 1 on �� 1 off �� 2 on �� 2 off ��... Repeat the cycle.
2. On the timer setting interface, press the [Hour] key to adjust the hour for the current timer
3. On the timer setting interface, press the [minute] key to adjust the minute of the current timer
4. On the timer setting interface, press the [Week] key to adjust the week setting selection for the current timer; There are 15 week combination modes to choose from for each "on" or "off" setting. By continuously pressing the [week] key, the 15 week combination display can be cycled as follows:
Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, Sunday, Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, Sunday, Friday, Friday, Friday, Friday, Friday, Friday, Friday, Friday, Friday, Friday, Friday, Friday, Friday, Friday, Friday, Friday, Friday, Friday, Friday, Friday, Friday, Friday, Friday, Friday, Friday, Saturday, Sunday, Friday, Friday, Friday, Friday, Friday, Friday, Friday, Friday, Friday, Friday, Friday, Friday, Friday, Friday, Friday, Friday, Friday, Friday, Friday, Friday, Friday.
5. In the timing setting interface, pressing the [Cancel/Restore] button will cancel or restore the set of timing.
6. On the timer setting interface, press the [Clock] key to return to the clock state.

4�� Instructions for using the light controlled rain control probe:
On the right side of the product, there is a light rain control socket and a light intensity adjustment knob. When the light control probe and rain control probe are not plugged in, the usage method is the same as described earlier.
2. Instructions for using the light control: If the switch output is in the on state, plug in the light control probe (the light control plug above and the rain control socket below). If there is light, the light rain control indicator light will turn on and the switch will turn off after about 30 seconds; After no light, the indicator light will turn off, and it will be recognized and restored to its original state after about 30 seconds; If the switch output is in the off state, regardless of whether there is light, the switch will not operate and will remain in the off state.
Adjusting the illuminance knob can change the starting illuminance. Turning it clockwise will decrease the illuminance (start when the light is dim), while turning it counterclockwise will increase the illuminance (start when the light is strong). When adjusting, simply observe the changes in the panel indicator light. When the illumination reaches the control illumination, adjust the knob to make the panel indicator light just turn off. Pay attention to waiting for 30 seconds for the output to change. It should be noted that after adopting light control, the time control switch must be set to on during the time period when light control is required.
3. Rain control usage method: Insert the rain control probe. If the switch output is in the on state, the probe will sense rainwater at this moment. After about 30 seconds of turning on, it will turn off. After about 30 seconds of no rainwater, it will recognize and restore the original state and turn on; If the switch output is in the off state, regardless of whether the probe senses rainwater or not, the switch will not operate and remain in the off state.
4. Simultaneous use of light control and rain control: In any state of light or rain, regardless of whether the switch is in the on or off state, after a delay of 30 seconds, the switch will enter the off state; If there is no light or rain, the timer switch will work according to the original set program.
5. Products with light and rain control function have about one minute of off state output when first turned on.

5�� Wiring method:
1. Wiring for direct control mode
The controlled electrical appliance is single-phase power supply, with power consumption not exceeding the rated capacity of this switch (25A resistive load, 20A inductive load), and can be directly controlled. The wiring method is shown in Figure 1.
2. Wiring of single-phase expansion method
The controlled electrical appliance is powered by single-phase power, but its power consumption exceeds the rated capacity of this switch (25A resistive load, 20A inductive load). Therefore, an AC contactor with a capacity exceeding the power consumption of the appliance is needed to expand its capacity. The wiring method is shown in Figure 2.
3. Wiring of indirect control mode
This controller is powered by single-phase AC or DC 12V (24V). If the controlled appliance is powered by three-phase, an external three-phase AC contactor is required. The coil voltage of the control contactor is the output voltage of this controller, and the wiring method is shown in Figure 3.

Specification Model	terminal	power control	load type	explanation
JSK-3A	six	3000W	arbitrary	JSK-3 is an improved version of JSK-1
JSK-3B	six	2X600W (two channels)	arbitrary
Overall Dimensions	125 × 82 × 68 millimeters	Fixed hole size	68X122 millimeters

[timer]SB6717 Timer

2026-6-13 21:19:15

SB6717 Timer

Timing range: 15min~23h45min Power supply: 220V/50Hz

SB6717 Timer

[timer]ANPA8 Type 7 Minute Timer

2026-6-13 21:16:33

ANPA8 7-minute timer

[timer]ANY-180 Industrial 24 Hour Timer

2026-6-13 21:16:25

ANY-180 Industrial 24-hour Timer

[timer]ATP1003 Digital Display Timer

2026-6-13 21:16:16

Seven days a week with programmable timed loop control, 20 sets of ON and 20 sets of OFF can be set daily/week, with different time periods for on/off cycling -15 week combinations to choose from - equipped with rechargeable battery, can maintain program memory for a long time during power outages

ATP1003 digital display timer

[timer]ATP1002 Industrial 24 Hour Timer

2026-6-13 21:16:07

ATP1002 Industrial 24-hour Timer

[timer]ATP1001 Industrial 24 Hour Timer

2026-6-13 21:15:58

ATP1001 Industrial 24-hour Timer

[Time-controlled switch]ZYT17-2a Two channel latitude and longitude time control switch

2026-6-13 21:15:11

ZYT17-2a two-way latitude and longitude time control switch

Timed range: Cycle work according to the set program every week or day, 1 minute to 168 hours
Working voltage AC220V/50Hz (other voltages can be customized according to user requirements)
Working temperature -10 ��~50 ��
Dimensions 100 × 50 × 74mm
Switch capacity 8A/circuit
Programmable 2 groups/route/day
The battery is rechargeable and can be operated for 30 days during power outages
Power consumption �� 5W
Timing error �� 30 seconds/year (adjustable error automatically)
Weight 180g
Installation method: rail or wall mounted
Safety Standard CQC

[Time-controlled switch]ZYT17 Longitude and latitude time control switch

2026-6-13 21:15:02

ZYT17 latitude and longitude time control switch
Longitude and latitude time control switch
timing range	Cycle work according to the set program every week or day, 1 minute to 168 hours
working voltage	AC220V/50Hz (other voltages can be customized according to user requirements)
Operating Temperature	-10�桫50��
Overall dimensions	100×50×74mm
switch capacity	8A
Programmable numbers	2 groups/day
Battery	Rechargeable battery, 30 day power-off operation timer
power consumption	��5W
timing error	�� 30 seconds/year (with automatic error adjustment)
Weight	175g
Installation method	Rail or wall mounted
safety standards	CQC

ZYT17 latitude and longitude time control switch

[Time-controlled switch]ZYT16G-2a,3a Two (three) channel time control switch

2026-6-13 21:14:53

ZYT16G-2a, 3a two (three) time control switch

ZYT16G-2a		ZYT16G-3a
Two way time control switch		Three way time control switch
timing range	Cycle work according to the set program every week or day, 1 minute to 168 hours
working voltage	AC220V/50Hz (other voltages can be customized according to user requirements)
Operating Temperature	-10�桫50��
Overall dimensions	120×72×50mm
switch capacity	8A/Road
Programmable numbers	8/10/16 groups/day
Battery	Battery No. 5, replaceable
power consumption	��4W
timing error	�� 2 seconds/day
Weight	270g
Installation method	Wall mounted guide rail
safety standards	CQC

ZYT16G-2a, 3a two (three) time control switch

[Time-controlled switch]ZYT16 microcomputer time control switch

2026-6-13 21:14:44

ZYT16
Microcomputer time control switch
timing range	Cycle work according to the set program every week or day, 1 minute to 168 hours
working voltage	AC220V/50Hz (other voltages can be customized according to user requirements)
Operating Temperature	-10�桫50��
Overall dimensions	120×74×58mm
switch capacity	25A
Programmable numbers	8/10/16 groups/day
Battery	AA battery
power consumption	��4W
timing error	�� 2 seconds/day
Weight	230g
Installation method	wall-mounted
safety standards	CQC

ZYT16 microcomputer time control switch

[Time-controlled switch]ZYT16G Microcomputer time control switch (improved version)

2026-6-13 21:14:34

ZYT16G
Microcomputer time control switch (improved version)
timing range	Cycle work according to the set program every week or day, 1 minute to 168 hours
working voltage	AC220V/50Hz (other voltages can be customized according to user requirements)
Operating Temperature	-10�桫50��
Overall dimensions	120×72×50mm
switch capacity	25A
Programmable numbers	8/10/16 groups/day
Battery	Battery No. 5, replaceable
power consumption	��4W
timing error	�� 2 seconds/day
Weight	210g
Installation method	Wall mounted panel with guide rail
safety standards	CQC

ZYT16G microcomputer time control switch (improved version)

[Time-controlled switch]ZYT01,ZYT01a Time controlled socket

2026-6-13 21:14:25

ZYT01, ZYT01a time control socket can be a time control socket, with an internationally recognized socket design. The product can automatically turn on and off the power of various electrical devices according to the time set by the user. The control objects can be street lamps, neon lights, advertising sign lights, production equipment, broadcasting and television equipment, and all electrical appliances and household appliances that need to be turned on and off at regular intervals (such as water dispensers, rice cookers, washing machines, and other household appliances). It realizes intelligent switching of electrical appliances, meets your daily needs, is convenient and easy to use, and can save energy.

timing range	Cycle work according to the set program every week or day, 1 minute to 168 hours
working voltage	AC220V/50Hz (other voltages can be customized according to user requirements)
Operating Temperature	-10�桫50��
Overall dimensions	123×60×68mm
switch capacity	10A or 16A
Programmable numbers	8/10/16 groups/day
Battery	Battery No. 5, replaceable
power consumption	��5W
timing error	�� 2 seconds/day
Weight	140g
Installation method	Wall socket type
safety standards

ZYT01, ZYT01a time control socket

[Time-controlled switch]Enhanced Time Control Switch

2026-6-13 21:14:16

ZYT16Z Enhanced Time Control Switch
Enhanced time control switch
timing range	Cycle work according to the set program every week or day, 1 minute to 168 hours
working voltage	AC220V/50Hz (other voltages can be customized according to user requirements)
Operating Temperature	-10�桫50��
Overall dimensions	120×72×50mm
switch capacity	25A
Programmable numbers	8/10/16 groups/day
Battery	Rechargeable battery, power outage timer for 30 days
power consumption	��4W
timing error	�� 2 seconds/day
Weight	270g
Installation method	Wall mounted guide rail
safety standards	CQC

ZYT16Z Enhanced Time Control Switch

[Time-controlled switch]KG-3 Microcomputer based optical time control switch

2026-6-13 19:56:39

KG-3 microcomputer light time control switch features:

1. Ideal energy-saving and prolonging the service life of lighting devices. It should be automatically turned on by light control during dark weather and automatically turned off by time control during dawn. This product combines light usage and is an ideal control product for street lamps, light boxes, and neon lights.
2. The controller contains a delay circuit during operation (instantaneous illumination). Built in rechargeable battery, external battery switch, high-precision, industrial grade chip, strong anti-interference.

model	KG-3
power supply voltage	220VAC 50~60HZ ±15%
Internal battery voltage	1.2VDC/40MAH rechargeable battery
Electricity consumption	��1.5VA
controlled output	25A 250VAC (resistive load)
display device	LCD display
Travel time error	�� 1 second/day
switching times	Switch 1-16 times per day/week cycle
ambient temperature	-10��~70��
ambient humidity	45~85��RH
mechanical life	�� 3000000 times
Weight size	430 grams, 120 × 74 × 52mm
Installation method	Installation type

KG-3 microcomputer light time control switch

[length meter]JK76 Intelligent Counting Meter

2026-6-13 19:50:06

Intelligent counter and meter counter

Model: JK76

Display mode: LED
Counting range: 0-999999
Input signals: contact signal and pulse signal
Control mode: relay
Contact load: AC250V 3A DC24V 5A
Working power supply: AC220V, AC110V, AC24V, DC12V
Auxiliary output power supply: 12V
Working temperature: 0-+50 degrees (relative humidity 45% -75%)
Anti interference capability: IEC801 3G
Panel size: 72mm × 72mm
Hole size: 68mm × 68mm

Features:
Counting speed optional, four output modes optional
Can count forward and reverse, suitable for dual stage output of rotary encoder

[length meter]JK96A Intelligent Counting Meter

2026-6-13 19:49:57

Intelligent counter and meter counter

Model: JK96A

Display mode: LED
Counting range: 0-999999
Input signals: contact signal and pulse signal
Control mode: relay
Contact load: AC250V 3A DC24V 5A
Working power supply: AC220V, AC110V, AC24V, DC12V
(Please specify which type of power supply it is when placing an order)
Auxiliary output power supply: 12V
Working temperature: 0-+50 degrees (relative humidity 45% -75%)
Anti interference capability: IEC801 3G
Panel size: 48mm × 96mm
Hole size: 45mm × 92mm

Features:
Counting speed optional, four output modes optional
Can count forward and reverse, compatible with rotary encoders Dual segment output

[length meter]HB965 Intelligent dual digital counter/grating meter/meter counter

2026-6-13 19:47:36

HB965 intelligent dual digital counter/grating meter/meter counter

1�� Characteristics
By setting the instrument counting mode, the instrument can achieve addition and subtraction counting and recognizable phase counting functions
Adapt to sensors such as phototubes, proximity switches, grating sensors, encoders, etc
Count value, alarm value, and set value will not be lost in case of power failure
Set two alarm values, with two independent relay outputs
Analog current transmission output, RS485 communication output

2�� Technical parameters

1. Working power supply: AC/DC85-260V (other voltages can be customized)

2. Measurement frequency: 10KHz
3. Pulse level: Low level: -50V~+0.5V;
High level:+4V to+50V
4. Trigger method: Low level trigger (switch contact falling edge trigger)

5. Display value: input value x magnification A ÷ magnification B+initial value C
6. Magnification range: Magnification A: 1 to 999999;
Ratio B: 1 to 999999

7. Display range: -199999 to 999999
8. Feed output: DC24V, DC5V, DC30mA
9. Contact capacity: AC220V/3A (resistive load)
10. Contact life: 105 times
11. Transmission output: 0-20mA, 4-20mA
12. Transmission accuracy: 0.2% FS
13. Communication: RS485; MODBUS_STU protocol
14. Dimensions: 96 × 48 × 85 mm
15. Hole size: 92 × 44mm
16. Operating environment: 0 �� to+50 ��; �� 85%RH

3�� Model Description

HB965 intelligent dual digital counter/grating meter/meter counter

[length meter]HB961 Intelligent dual digital counter/grating meter/meter counter

2026-6-13 19:47:27

HB961 intelligent dual digital counter/grating meter/meter counter

1�� Characteristics

By setting the counting mode, the instrument can achieve addition and subtraction counting and recognizable phase counter functions
External photoelectric tube, proximity switch, grating sensor, encoder can be connected
Count value, alarm value, and functional parameter value will not be lost in case of power failure
Can set two alarm values, with two independent relay outputs
Multiple relay output modes are available to meet the measurement needs of various occasions

2�� Technical parameters
1. Working power supply: AC/DC85-260V (other voltages can be customized)

2. Counting frequency: 30KHz (grating table 15KHz)
3. Pulse level: Low level: -50V~+0.5V;
High level:+4V to+50V

4. Trigger method: Low level trigger (switch contact falling edge trigger)
5. Instrument display value: Pulse input value x A ÷ B+C
6. Magnification range: Magnification A: -199999 to 999999
Ratio B: 1 to 999999

7. Initial value: -199999 to 999999
8. Display range: -199999 to 999999
9. Feed output: DC24V, DC5V, DC30mA
10. Contact capacity: AC250V 3A (resistive load)
11. Contact life: 105 times
12. Dimensions: 96 × 48 × 82mm
13. Hole size: 92+1 × 44.5+1mm
14. Operating environment: 0 �� to+50 ��; �� 85%RH

[Time-controlled switch]DHC20 series 24 hour controller

2026-6-13 19:40:54

DHC20 series 24-hour time controller:

DHC20 series 24-hour time controller features
24-hour time controller with DIN standard size and DIN35mm standard rail installation
Replace mechanical methods with electronic ones.
15 minutes is the minimum set time, and the operation is very easy.
24-hour clock display, LED backlight, illuminated during keyboard operation.
Equipped with a built-in battery, it will continue to operate as usual after a power outage
High precision, high reliability, with daylight saving time.
patented product
Compliant standards: Q/WDH03-2003, GB14048.5-2001, IEC60947-5-1:1997

[timer]SUL181h type timer

2026-6-13 19:27:26

SUL181h timer

·Quartz clock with backup power supply after 3 days;
·24-hour segmented switch dial;
·24-hour segmented switch dial;
·The program time unit is 15 minutes;
·Track installation;

Product specifications

Category		timer
model		SUL181h
Contact capacity		AC220V 16A
Switch dial		24h
contact resistance		��50m��
insulation resistance		��100m��
coil voltage		220V AC
life	electricity	ten^7times
	mechanical	ten^5times
ambient temperature		-40�桫��55��
Storage time		time 150h
set number of times		48 times
Switching time unit		30 minutes
Minimum switch time		30 minutes

SUL181h timer external dimensions SUL181h

SUL181h timer

[Measuring device]DCZ-9C Meter

2026-6-13 18:57:57

DCZ-9C measuring instrument only requires technical parameters

Working voltage:	3V-6V��
DC impedance:	450��±50��/20�棻
Applicable pulse width:	50ms-600ms��
Applicable frequency:	��4HZ
Output torque:	At 57 �� Nm/4.5V
Operating Temperature	-35��-+70��
service life	More than 1 billion pulses (>10 years);
Anti magnetic performance:	Meets the requirements of GB/T17215 standard;
Other technical conditions:	Meets the requirements of JB5459-91 standard;
Applicable electric meter constant:	800/1600/3200imp/kw·h.

[Measuring device]DCZ-9 Meter

2026-6-13 18:57:49

Main Technical Parameters of DCZ-9 Meter

Working voltage:	3V-6V��
DC impedance:	450��±50��/20�棻
Applicable pulse width:	50ms-600ms��
Applicable frequency:	��4HZ
Output torque:	At 57 �� Nm/4.5V
Operating Temperature	-35��-+70��
service life	More than 1 billion pulses (>10 years);
Anti magnetic performance:	Meets the requirements of GB/T17215 standard;
Other technical conditions:	Meets the requirements of JB5459-91 standard;
Applicable electric meter constant:	800/1600/3200imp/kw·h.