Shanghai Huabang Industrial Business Network - Textile motor

[Textile motor]FGX2 series textile high-efficiency three-phase asynchronous motor

2026-6-15 14:26:58

FGX2 series textile high-efficiency three-phase asynchronous motor

[Textile motor]SL series water-cooled spinning machine main motor

2026-6-15 14:26:50

SL series water-cooled spinning machine main motor

[Textile motor]FY series textile three-phase asynchronous motor

2026-6-15 14:26:41

For a fully enclosed self fan cooled squirrel cage three-phase asynchronous motor, the fan cover adopts a clean flow fan cover, which has the characteristics of good ventilation effect and strong anti fiber blockage ability. It is suitable for various textile, printing and dyeing machinery such as cotton, wool, linen, silk and chemical fibers, and can work in environments with high dust, short fibers, high temperature and humidity. It can also be used for driving other mechanical equipment.

[Textile motor]FS12A-4,FS12-4 type textile three-phase asynchronous motor

2026-6-15 14:26:32

FS12A-4 and FS12-4 textile three-phase asynchronous motors are fully enclosed self cooled squirrel cage low-power motors for textile use. The base and end caps are made of aluminum alloy die-casting, suitable for various textile machinery such as cotton, wool, linen, silk, and chemical fibers. They can work in environments with high dust, short fibers, and high temperature and humidity, and can also be used to drive other machinery.

[Textile motor]FTYP series textile three-phase permanent magnet synchronous motor

2026-6-15 14:26:24

The FTYP series textile three-phase permanent magnet synchronous motor is a fully enclosed self fan cooled three-phase permanent magnet synchronous motor developed using rare earth materials. It has high speed regulation accuracy, wide speed regulation range, small size, light weight, easy control, and high reliability. Adopting open-loop control improves the reliability and reduces the price of the entire variable frequency control system. The energy-saving effect is obvious. Compared with ordinary asynchronous motors, it has high efficiency and a power factor of over 0.95.

[Textile motor]FO2-7 series textile three-phase asynchronous motor

2026-6-15 14:26:16

The FO2-7 series textile three-phase asynchronous motor is specially designed for cotton, linen, and wool carding machines. In addition to the FO2Q-72-4, the carding machine is driven by a friction clutch and has a large short-term overload capacity. It can also be used on other mechanical equipment under similar working conditions.

[Textile motor]FO3-3-2F type textile three-phase asynchronous motor

2026-6-15 14:26:07

The FO3-3-2F textile three-phase asynchronous motor is a suction motor for carding machines. The motor itself does not have fan blades and is cooled by a suction fan. Electric motors must be used in cooling situations similar to fans, otherwise the temperature rise of the motor will exceed the allowable limit to avoid burning out the motor.

[Textile motor]FO3-4F type textile three-phase asynchronous motor

2026-6-15 14:25:58

The FO3-4F textile three-phase asynchronous motor is a closed self cooling squirrel cage three-phase asynchronous motor used as a suction fan drive on the A186E carding machine. The motor is a 2-pole motor.

[Textile motor]FXS180 Textile water-cooled three-phase asynchronous motor

2026-6-15 14:25:49

FXS180 textile water-cooled three-phase asynchronous motor is a fully enclosed water-cooled squirrel cage type three-phase asynchronous motor. Due to circulating water cooling instead of fan cooling, it has the characteristics of high efficiency, low temperature, strong anti fiber blockage ability, low noise, safety and reliability compared to motors of the same specifications. It is suitable for various textile and printing machinery such as cotton, wool, linen, and chemical fibers, and can work for a long time in environments with high dust, short fibers, and high temperature and humidity.

[Textile motor]FFS type textile three-phase asynchronous motor

2026-6-15 14:25:41

The FFS type textile three-phase asynchronous motor is a motor designed for the dust collection box of carding machines. It is a fully enclosed self cooling squirrel cage three-phase asynchronous motor, suitable for various textile machinery such as cotton, wool, linen, silk, and chemical fibers. It can work in environments with high dust, short fibers, and high temperature and humidity, and can also be used to drive other machinery.

[Textile motor]FOL160M-2 type textile three-phase asynchronous motor

2026-6-15 14:25:33

The FOL160M-2 textile three-phase asynchronous motor is a fully enclosed self fan cooled squirrel cage three-phase asynchronous motor, which is the main motor matched with the blowing and suction fan of the automatic winding machine. Its characteristics are small starting current and high bearing load. Suitable for various textile machinery such as cotton, wool, linen, silk, and chemical fibers. It can work in environments with high dust, short fibers, and high temperature and humidity, and can also be used to drive other machinery.

[Textile motor]FO3PS132 type textile three-phase asynchronous motor

2026-6-15 14:25:23

The FO3PS132 textile three-phase asynchronous motor is a fully enclosed self cooling squirrel cage three-phase asynchronous motor used for driving the carding machine. It can use a variable frequency power supply for stepless speed regulation and can also be used on other mechanical equipment with similar usage environments.

[Textile motor]FDZ120/55-2 type variable frequency speed regulation three-phase asynchronous motor

2026-6-15 14:25:15

FDZ120/55-2 type variable frequency speed regulation three-phase asynchronous motor is a closed self cooling squirrel cage type variable frequency three-phase asynchronous motor, which is specially designed for direct twisting machines. Its frequency conversion range is 50Hz-190Hz, with constant torque operation within 50Hz-160Hz and constant power operation within 160Hz-190Hz. This electric motor is developed using high-quality materials, advanced technology, and sophisticated equipment, and has excellent electrical performance, smooth operation, low temperature rise, low vibration, low noise, and beautiful appearance. The protection level is IP44 and the insulation level is B. It can also be used for driving other machinery.

[Textile motor]FDL107/65-2 type three-phase asynchronous motor

2026-6-15 14:25:06

The FDL107/65-2 three-phase asynchronous motor is a fully enclosed self cooled squirrel cage three-phase asynchronous motor designed specifically for single spindle automatic winding machines used in textiles. Its characteristics are high efficiency, low temperature rise, large starting torque, small starting current, and beautiful appearance. The protection level is IP55 and the insulation level is F. The working mode is a continuous cycle working system including electric braking. Suitable for various textile machinery such as cotton, wool, linen, silk, and chemical fibers, it can work in environments with high dust, short fibers, and high temperature and humidity, and can also be used for driving other machinery.

[Textile motor]FSP12A-4,FSP12-4 type variable frequency speed regulation three-phase asynchronous motor

2026-6-15 14:24:57

A fully enclosed self cooling squirrel cage type low-power motor for textile use, adapted with a frequency converter as the power supply, can achieve stepless smooth speed regulation and has a wide speed regulation range. Its frequency conversion range is 5Hz~100Hz, with constant torque operation within 5Hz~50Hz and constant power operation within 50Hz~100Hz. Suitable for various printing and dyeing textile machinery such as cotton, wool, linen, silk, synthetic fibers, and other types of machinery, capable of working in environments with dust, short fibers, and high temperature and humidity.

[Textile motor]FVP series variable frequency speed regulation three-phase asynchronous motor

2026-6-15 14:24:49

The FVP series variable frequency speed regulation three-phase asynchronous motor is compatible with a frequency converter as the power supply, which can achieve stepless smooth speed regulation. Its frequency conversion range is 10Hz-80Hz, with constant torque operation within 10Hz-50Hz and constant power operation within 50Hz-80Hz. And this series of motors has high efficiency, smooth operation, and significant energy-saving effects. It is suitable for various printing and dyeing textile machinery such as cotton, wool, linen, silk, synthetic fibers, and other types of machinery. It can work in environments with dust, short fibers, and high temperature and humidity. Its structure is fully enclosed self fan cooled, with a protection level of IP44 and an insulation level of F.

[Textile motor]FXP series variable frequency speed regulation three-phase asynchronous motor

2026-6-15 14:24:40

The FXP series variable frequency speed regulation three-phase asynchronous motor is compatible with a frequency converter as the power supply, which can achieve stepless smooth speed regulation. Its frequency conversion range is 20Hz-80Hz, with constant torque operation within 20Hz-50Hz and constant power operation within 50Hz-80Hz. And this series of motors has high efficiency, smooth operation, and significant energy-saving effects. It is suitable for various printing and dyeing textile machinery such as cotton, wool, linen, silk, synthetic fibers, and other types of machinery. It can work in environments with dust, short fibers, and high temperature and humidity. Its power rating and installation dimensions comply with the IEC International Electrotechnical Commission standards. Its structure is fully enclosed self fan cooled, with a protection level of IP44 and an insulation level of F.

[Textile motor]FGQ132 type high torque textile three-phase asynchronous motor

2026-6-15 14:24:32

The FGQ132 high torque textile three-phase asynchronous motor is a closed self fan cooled squirrel cage three-phase asynchronous motor. It has extremely high starting torque and good low-frequency characteristics, especially suitable for situations with impact loads, and is more energy-efficient than general motors when used in such situations. This series of motors is the main motor for jet looms and can also be applied to situations similar to the above. When the motor is started, it is connected to ��, and when it is running, it is connected to Y.

[Textile motor]FFX series textile three-phase asynchronous motor

2026-6-15 14:24:24

The FFX series textile three-phase asynchronous motor is a fully enclosed self cooling squirrel cage type three-phase asynchronous motor, which is specifically designed for use with cotton suction fans on spinning machines. The motor itself does not have fan blades and is cooled by a cotton suction fan. The FFXP132S1-2 motor is a three-phase asynchronous motor with variable frequency speed regulation. Its frequency range is 30Hz~80Hz, with constant torque operation within 30Hz~50Hz and constant power operation within 50Hz~80Hz. Suitable for various textile machinery such as cotton, wool, linen, silk, and chemical fibers. It can work in environments with high dust, short fibers, and high temperature and humidity, and can also be used to drive other machinery.

[Textile motor]FXSQ132 type three-phase textile asynchronous motor

2026-6-15 14:24:15

The FXSQ132L-4 three-phase asynchronous motor is a main motor designed for the new carding machine Xilin. In addition to the characteristics of the FXS132M-4 motor, it also has the feature of high starting torque.

[Textile motor]FXS132 type three-phase textile asynchronous motor

2026-6-15 14:24:07

The FXS132M-4 three-phase asynchronous motor is a main motor designed for carding machines with high efficiency, energy saving, low temperature rise, strong anti fiber blockage ability, and safety and reliability. It is suitable for various textile, printing and dyeing machinery such as cotton, wool, linen, silk, and chemical fibers. It can work in environments with high dust, short fibers, and high temperature and humidity, and can also be used to drive other machinery.

[Textile motor]FEJS type electromagnetic braking three-phase dual speed asynchronous motor

2026-6-15 14:23:59

FEJS type electromagnetic braking three-phase dual speed asynchronous motor

[Textile motor]FE2SP180-4 type high-efficiency variable frequency three-phase asynchronous motor

2026-6-15 14:23:50

FE2SP180-4 high-efficiency variable frequency three-phase asynchronous motor

Motor model	power	Current	rated speed	locked-rotor current	Locked rotor torque	maximum torque	insulation class	Protection level	connection method	power factor	efficiency
	power	Current	rated speed	rated current	rated torque	rated torque	insulation class	Protection level	connection method	power factor	efficiency
	KW	A	r/min	Ist/In	Tst/Tn	Tm/Tn		IP		cos��	��%
FE2SP180M1-4	fifteen	thirty	one thousand four hundred and sixty	seven point five	two	two point three	F	fifty-five	��	zero point eight four	ninety point six
FE2SP180M2-4	seventeen	thirty-three	one thousand four hundred and seventy	seven point six	two	two point three	F	fifty-five	��	zero point eight five	ninety-one
FE2SP180L1-4	eighteen point five	thirty-six	one thousand four hundred and seventy	seven point six	two	two point three	F	fifty-five	��	zero point eight five	ninety-one point two
FE2SP180L2-4	twenty-two	forty-two	one thousand four hundred and seventy	seven point seven	two point one	two point three	F	fifty-five	��	zero point eight six	ninety-one point six
FE2SP225S-4	thirty-seven	seventy-one	one thousand four hundred and seventy-five	seven point three	two point one	two point three	F	fifty-five	��	zero point eight six	ninety-two point seven
FE2SP225M-4	forty-five	eighty-five	one thousand four hundred and seventy-five	seven point three	two point two	two point three	F	fifty-five	��	zero point eight six	ninety-three point one
FE2SP225M2-4	fifty-five	one hundred and four	one thousand four hundred and seventy-five	seven point three	two point two	two point three	F	fifty-five	��	zero point eight six	ninety-three point five

[Textile motor]FSLD180-6/4 type fully enclosed water-cooled squirrel cage three-phase asynchronous motor

2026-6-15 14:23:42

FSLD180-6/4 fully enclosed water-cooled squirrel cage three-phase asynchronous motor

Motor model	power	Current	rated speed	locked-rotor current	Locked rotor torque	maximum torque	insulation class	Protection level	connection method	power factor	efficiency
	power	Current	rated speed	rated current	rated torque	rated torque	insulation class	Protection level	connection method	power factor	efficiency
	KW	A	r/min	Ist/In	Tst/Tn	Tm/Tn		IP		cos��	��%
FSLD180M1-6/4	7/15	17.1/29.2	960/1440	7/6	1.1/1.7	2.2/1.7	F	fifty-four	3Y/4Y
FSLD180M2-6/4	9/17	21.6/33.3	960/1440	7/6	1.5/1.7	2.2/1.7	F	fifty-four	3Y/4Y
FSLD180L1-6/4	11/18.5	26.1/36.2	960/1440	7/6	1.3/1.7	2.2/1.7	F	fifty-four	3Y/4Y
FSLD180L2-6/4	11/22	26.1/42.1	960/1440	7/6	1.5/1.7	2.2/1.7	F	fifty-four	3Y/4Y

FSLD180-6/4 fully enclosed water-cooled squirrel cage three-phase asynchronous motor

[Textile motor]FQ series high starting torque three-phase asynchronous motor

2026-6-15 14:23:33

The FQ series high starting torque three-phase asynchronous motor has extremely high starting torque and good low-frequency operating characteristics, making it particularly suitable for situations with impact loads. In such situations, it is more energy-efficient than general motors. This series of motors is the main motor for water jet looms, without a junction box, and uses an outlet board to output. It can also be applied to situations similar to the above. When the motor is started, it is connected to ��, and when it is running, it is connected to Y.

Main technical data of FQ series high starting torque three-phase asynchronous motor:

Motor Type	Rated Power	Current	Rated Speed	Power Factor	Efficiency	Locked Current	Locked Torque	Maximum Torque
	Rated Power	Current	Rated Speed	Power Factor	Efficiency	Rated Current	Rated Torque	Rated Torque
	KW	A	r/min	cos��	��%	Ist/In	Tst/Tn	Tm/Tn
FQ112M0-4	one point eight	four point one	one thousand four hundred and fifty	zero point seven eight	eighty-four point five	fourteen	fifteen	five
FQ112M-4	two	four point six	one thousand four hundred and fifty	zero point seven eight	eighty-four point five	fourteen	fifteen	five
FQ112M1-4	two point two	five point one	one thousand four hundred and fifty	zero point seven eight	eighty-four point six	fourteen	fifteen	five
FQ112M2-4	two point six	five point nine	one thousand four hundred and fifty	zero point seven nine	eighty-four point eight	fourteen	fifteen	five
FQ132M0-4	three	seven	one thousand four hundred and thirty	zero point seven eight	eighty-four	nineteen	twelve	three
FQ132M1-4	three point five	seven point nine	one thousand four hundred and thirty	zero point eight	eighty-four point four	nineteen	twelve	three
FQ132M2-4	three point seven	eight point three	one thousand four hundred and thirty	zero point eight	eighty-four point five	nineteen	twelve	three
FQ132M3-4	four	nine	one thousand four hundred and thirty	zero point eight	eighty-four point five	nineteen	twelve	three
FQ132L1-4	four point five	ten point four	one thousand four hundred and fifteen	zero point seven eight	eighty-four point five	nineteen	twelve	three
FQ132L1-4	five	eleven	one thousand four hundred and fifteen	zero point eight two	eighty-four point five	nineteen	twelve	three
FQ132L1-4	five point five	eleven point nine	one thousand four hundred and fifteen	zero point eight three	eighty-four point five	nineteen	twelve	three
FQ132L1-4	six point five	thirteen point nine	one thousand four hundred and fifteen	zero point eight four	eighty-four point five	nineteen	twelve	three

[Textile motor]FE2VP180 series high-efficiency variable frequency speed regulation three-phase asynchronous motor

2026-6-15 14:23:25

The FE2VP180 series high-efficiency variable frequency speed regulation three-phase asynchronous motor has high efficiency. Specially designed for variable frequency control spinning machines, it is a fully enclosed self fan cooling type that is easy to lubricate. It is suitable for various textile machinery such as cotton, wool, linen, and silk, and can work reliably in environments with high dust, short fibers, and high temperature and humidity. The frequency conversion range is 5Hz~100Hz, and the rated frequency is 50Hz. When operating between 5Hz~50Hz, it is a constant torque speed regulation; When operating between 5Hz and 50Hz, it is a constant power speed regulation.

FE2VP180 series high-efficiency variable frequency speed regulation three-phase asynchronous motor main technical data:

Motor Type	Rated Power	Current	Efficiency	Power Factor	Torque	Constant Torque	constant power	Weight
	Rated Power	Current	Efficiency	Power Factor	Torque	Constant Torque	constant power	Weight
	KW	A	��%	cos��	N.M	Hz	Hz	kg
FE2VP 180M1-4	fifteen	twenty-nine point nine	ninety point six	zero point eight four	ninety-five point five	5-50	50-100	one hundred and seventy
FE2VP 180M2-4	seventeen	thirty-three point eight	ninety point nine	zero point eight four	one hundred and eight point two	5-50	50-100	one hundred and eighty
FE2VP 180L1-4	eighteen point five	thirty-six point three	ninety-one point two	zero point eight five	one hundred and seventeen point eight	5-50	50-100	one hundred and ninety
FE2VP 180L2-4	twenty-two	forty-two point nine	ninety-one point six	zero point eight five	one hundred and forty	5-50	50-100	two hundred and ten
FE2VP 180L3-4	twenty-five	forty-eight point seven	ninety-one point eight	zero point eight five	one hundred and fifty	5-50	50-100	two hundred and twenty
FE2VP 180M1-6	thirteen	twenty-seven point seven	eighty-nine point two	zero point eight	one hundred and twenty-four point two	5-50	50-100	one hundred and seventy
FE2VP 180M2-6	fifteen	thirty-one	eighty-nine point seven	zero point eight two	one hundred and forty-three point three	5-50	50-100	one hundred and eighty
FE2VP 180L2-6	seventeen	thirty-five point four	ninety point one	zero point eight one	one hundred and sixty-five point five	5-50	50-100	two hundred and ten

Appearance and installation dimensions (mm):

Frame Size

Mounting Dimensions (mm)

Overall Dimensions (mm)

FE2VP 180M

two hundred and seventy-nine

two hundred and forty-one

one hundred and twenty-one

forty-eight

one hundred and ten

fourteen

forty-two point five

one hundred and eighty

4-��15

three hundred and forty-nine

three hundred and thirty

three hundred and seventy-five

two hundred and eighty

four hundred and twenty

six hundred and seventy

FE2VP 180L

two hundred and seventy-nine

three hundred and fifty

seven hundred and ten

[Textile motor]FE2VP225 series high-efficiency variable frequency speed regulation three-phase asynchronous motor

2026-6-15 14:23:16

The FE2VP225 series high-efficiency variable frequency speed regulation three-phase asynchronous motor is designed as a textile specific motor for long spinning machines with 1008 spindles and above. This motor has the advantages of low temperature rise, small size, low noise, and strong ability to prevent cotton blockage. And equipped with non-stop front and rear bearing oil injection devices, effectively improving the service life of the bearings.

FE2VP225 series high-efficiency variable frequency speed regulation three-phase asynchronous motor main technical data (380V/50HZ)

Motor Type	Rated Power	Current	Efficiency	Power Factor	Torque	Constant Torque	constant power
	Rated Power	Current	Efficiency	Power Factor	Torque	Constant Torque	constant power
	KW	A	��%	cos��	N.M	Hz	Hz
FE2VP 225S-4	thirty-seven	sixty-nine	ninety-two point seven	zero point eight six	two hundred and thirty-five point five	5-50	50-100
FE2VP 225M-4	forty-five	eighty-three point five	ninety-three point one	zero point eight six	two hundred and eighty-six point four	5-50	50-100
FE2VP 225M2-4	fifty-five	one hundred and two	ninety-three point five	zero point eight six	three hundred and fifty	5-50	50-100

Frame Size

Mounting Dimensions (mm)

Overall Dimensions (mm)

FE2VP 225S

three hundred and fifty-six

two hundred and eighty-six

one hundred and forty-nine

sixty

one hundred and forty

eighteen

fifty-three

two hundred and twenty-five

nineteen

four hundred and thirty-five

four hundred and seventy

three hundred and thirty-five

five hundred and fifty-five

eight hundred and fifteen

FE2VP 225M

three hundred and eleven

eight hundred and forty-five

[Textile motor]FXY100 series high power index three-phase asynchronous motors for textile use

2026-6-15 14:23:08

FXY100 series textile high power index three-phase asynchronous motor - main motor

The FXY100 series textile high power index three-phase asynchronous motor is designed according to the special requirements of the new weaving machine. It has high power indicators such as high starting torque, overload capacity, and efficiency, reliable operation, and easy maintenance. It can work in environments with high dust, short fibers, and high temperature and humidity, and is suitable as the main power source for various textile machinery such as cotton, linen, wool, and silk.

FXY100 series textile high power index three-phase asynchronous motor structure description:
1. The electric motor is fully enclosed and self fan cooled.
2. The motor casing is made of aluminum alloy die-casting, with good heat dissipation and light weight.
3. Install directly onto the entire machine using a flange stopper.

[Textile motor]FLD-7144 type three-phase asynchronous torque motor (multi arm motor)

2026-6-15 14:22:59

FLD-7144 Three phase Asynchronous Torque Motor - Multi arm Motor

The FLD-7144 three-phase asynchronous torque motor (multi arm motor) has the mechanical characteristic of constant torque, and the output torque of the motor remains basically constant within the rated speed range. Used in textile machinery, it can ensure that the tension required for conveying products on the guide roller shaft remains constant within the rated speed range. Used as a power source for automatic weft finding on the "multi arm" of the loom.
Structure description of FLD-7144 three-phase asynchronous torque motor (multi arm motor):

1. The casing and end caps of the electric motor are made of aluminum alloy castings, which are lightweight.
2. Fully sealed, without external blades, directly installed on the entire machine with a large flange.
3. The electric motor operates on an intermittent short-term working system and is equipped with a thermal protector to protect the motor.

[Textile motor]FYJ7114 type gear reduction three-phase asynchronous motor (slow motor)

2026-6-15 14:22:51

FYJ7114 Gear Reduction Three Phase Asynchronous Motor - Slow Motor

FYJ7114 gear reduction three-phase asynchronous motor (slow motor) is suitable for various weaving machines to find broken weft. The motor serves as a short-term and low-speed driving force source, commonly known as a slow motor. The use of this product makes the weaving machine easy to use, operates smoothly and reliably, and improves the efficiency of the weaving machine.

Structure description of FYJ7114 gear reduction three-phase asynchronous motor (slow motor):
1. This product is an integrated product directly coupled by an electric motor and a precision reducer. The reducer is coaxial, compact in structure, and has low noise.
2. The casing and end caps of the electric motor are all aluminum alloy die-casting parts, fully enclosed and lightweight.
3. Directly installed on the loom using a flange stopper.

[Textile motor]FPJJ7134 series gear reduction three-phase asynchronous torque motor (sending motor)

2026-6-15 14:22:43

FPJJ7134 series gear reduction three-phase asynchronous torque motor - feed motor

The FPJJ7134 series gear reduction three-phase asynchronous torque motor (warp feeding motor) has the winding mechanical characteristics of constant power output. As the diameter of the drum on the winding machine continues to increase and the load increases, the speed of the torque motor decreases accordingly, allowing the warp yarn to maintain constant tension and ensuring product quality. On the new weaving machine, it is electronically controlled and serves as the driving force source for electronic warp feeding, greatly improving the efficiency of the weaving machine and the quality of the fabric.

FPJJ7134 series gear reduction three-phase asynchronous torque motor (sending motor) structure description:
1. This product is an integrated product consisting of an electric motor and a precision reducer, which is a coaxial reducer with a compact structure and low noise.
2. The casing and end caps of the electric motor are made of aluminum alloy die-casting parts, which are lightweight and fully enclosed for vertical installation.
3. The fan blades of the electric motor are designed with a special structure to ensure that the fan blades can rotate on their own during pulse operation and self cool the motor.
4. The electric motor is equipped with 4N-M; There are two outputs of 6N-M, 4N-M is used for driving and can withstand frequent starting and continuous operation for a long time under pulse voltage, and 6N-M is used for short-term driving of the upper plate.
5. The motor is equipped with a thermal protector to protect it.

[Textile motor]SLD701 Three phase textile specific motor

2026-6-15 14:22:34

Model Type	Power Supply	Output power W		RPM (revolutions per minute)	Rated current A	starting torque
						rated torque
SLD701	3N~380V��50Hz	2-pole	one thousand and two hundred	two thousand and eight hundred	three	one
		Level 18	one hundred and thirty-five	three hundred and ten	one point four	one

SLD701 three-phase textile specific motor

[Textile motor]F03 series textile three-phase asynchronous motor

2026-6-15 14:22:26

The FO3 series three-phase asynchronous motor is suitable for various textile machinery such as cotton, wool, linen, silk, and chemical fibers.
The rating of FO3 series three-phase asynchronous motors is based on the continuous duty cycle (S1) and adopts B-level insulation. The protection level of the shell is IP44, and the cooling method is IC410.
The rated frequency of FO3 series three-phase asynchronous motors is 50HZ and the rated voltage is 380V. Except for FO3-41-4/16 motors, which use the delta connection method for the four poles, all others use the Y connection method. When users have special requirements, motors with different frequencies and voltages can also be manufactured.

Installation form and external dimensions of F03 series textile three-phase asynchronous motor

frame size

Installation sizes (mm)

Overall dimensions (mm)

FQ1-72A-4

three hundred

one hundred and eighty-five

thirty-two

thirty-five

sixty-five

ten

thirty

fifteen

one hundred and eighty

four hundred and one

FQ1-72-4

FQ1-72-6

FQ1-74-4

Main specifications and technical parameters

model	Power (kw)	rated speed (r/min)	Efficiency (%)	power factor (cos��)	Locked rotor torque/ rated torque	Maximum torque/ rated torque	Blockage current/ rated current
FQ3-40-4/12	0.75/0.37	1420/470	78/54	0.8/0.5	1.6/1.4	2.2/1.8	8/5.5
FQ3-41-4/12	1.1/0.6	1420/470	76/68	0.82/0.57	1/1		7/5.5
FQ3-41-4/16	0.75/0.37	1420/350	76/51	0.725/0.37	1.6/1.2		8/5.5
FQ3-41-4	one point one	one thousand four hundred and forty-five	eighty-five	zero point eight two	two	two point two	seven point five
FQ3-42-4	one point five	one thousand four hundred and fifty	eighty-three	zero point eight one	two	two point two	eight

Motor with base feet and end caps without flanges (IMB3)

Installation dimensions and tolerances (mm)
A	A/2	B	C	D	E	F	G	H	K
216±0.70	108±0.50	140±0.70	89±2.0	thirty-two	80±0.37	ten	twenty-seven point five	one hundred and thirty-two	twelve
Dimensions (mm)
AB		AC		AD		HD		L
two hundred and seventy-five		two hundred and seventy		one hundred and eighty-seven		three hundred and fifteen		three hundred and ninety-seven

[Textile motor]F02 series high-power three-phase asynchronous motors for textile use

2026-6-15 14:22:18

The FO2 series high power index three-phase asynchronous motor is a type of high power index three-phase asynchronous motor used for textile machines such as cotton, wool, linen, silk, and chemical fibers. It has more effective anti fiber blockage ability and higher overload capacity than general motors, especially suitable for use in short fiber environments. Its quota is based on the continuous work system (S1) as the benchmark for continuous quota. The protection level of the shell is IP44, the cooling method is IC0041, and the installation form is IMB3. When requested by the user, other structures and installation types can be made.

Main specifications and technical parameters of F02 series high-power three-phase asynchronous motors for textile use

model	rated power (kw)	rated current (a)	speed (r/min)	efficiency (%)	power factor (cos��)	Locked rotor torque/ rated torque	Maximum torque/ rated torque	Blockage current/ rated current
FQ2-72	three point three	six point three four	one thousand four hundred and sixty	eighty-eight point five	zero point eight nine	eight	one point seven	three point five
FQ2-72A	two point two	four point three five	one thousand four hundred and sixty	eighty-eight point five	zero point eight five	nine point five	one point seven	three point five
FQ2-72	two point eight	six point two five	nine hundred and fifty	eighty-six	zero point seven eight	seven	one point eight	three point five
FQ2-74	five point five	ten point five	one thousand four hundred and sixty	ninety	zero point eight nine	ten point five	one point seven	three point five

F02 series high power index three-phase asynchronous motor for textile use

[Textile motor]FC,FOH series three-phase asynchronous motors for textile use

2026-6-15 14:22:09

The rating of FO series three-phase asynchronous motors is based on the continuous working system (S1) as the standard for continuous rating. The protection level of the shell is IP44, and the cooling method is IC0041
The structure and installation form of FO series three-phase asynchronous motors are IBM3

The rated frequency of the FO series three-phase asynchronous motor is 50HZ, the rated voltage is 380V, and it is connected in Y configuration.

Main specifications and technical parameters of FC and FOH series three-phase asynchronous motors for textile use

frame size

Installation size (mm)

Dimensions (mm)

fifty-three

two hundred and twenty

one hundred and forty-five

thirty-eight

twenty-eight

fifty

twenty-four

one hundred and fifty

fourteen

two hundred and eighty

two hundred and eight

two hundred and ninety

two hundred and seventy-five

fifty-four

forty-five

sixteen

two hundred and eighty-seven

fifty-five

fifty-six

fifty

forty-five

fourteen

Installation form and external dimensions of FC and FOH series three-phase asynchronous motors for textile use

model	rated power (kw)	rated current (a)	speed (r/min)	efficiency (%)	power factor (cos��)	Locked rotor torque/ rated torque	Maximum torque/ rated torque	Blockage current/ rated current
FC53-6	zero point eight	one point eight eight	nine hundred and sixty	eighty-four	zero point seven seven	seven	one point seven	two point four
FC54-6	one point one	two point four six	nine hundred and fifty	eighty-five	zero point seven nine	seven	one point seven	two point two
FC54-8	one	two point three six	seven hundred and thirty	eighty-four	zero point seven six	six point five	one point seven	two point two
FC55-6	one point three	two point eight six	nine hundred and fifty	eighty-five	zero point eight	seven	two	two point two
FOH56-6	one point five	three point five	nine hundred and fifty	eighty-seven	zero point eight	seven	two	two point two
FOH56-8	one point five	three point six	seven hundred and fifteen	eighty-seven	zero point eight	seven	two	two point two

FC, FOH series three-phase asynchronous motors for textile use

[Textile motor]FYQQ series three-phase asynchronous motors for textile use

2026-6-15 14:22:01

The FYQQ series electric motor is a closed self cooled squirrel cage three-phase asynchronous motor with high starting torque and good low-frequency characteristics. It is particularly suitable for situations with impact loads and can save electricity compared to general motors when used in such situations. This motor is the main motor for air-jet looms, suitable for air-jet looms produced with the introduction of Tsuda Koma technology from Japan. It can completely replace imported motors. The motor starts with the �� connection and then switches to the Y connection after starting. The protection level of the shell is IP44, the cooling method is IC411, the rated voltage is 380V, and the rated frequency is 50HZ.

Structure and installation method
IMB3 type: horizontal, with a base with feet and an end cap without flanges. No junction box, using an outlet board for wiring.

Main specifications and technical parameters of FYQQ series three-phase asynchronous motors for textile use

Model number	Rated power (kw)	rated current	Speed (r/min)	Efficiency (%)	power factor (cos��)	Locked rotor torque /Rated torque	Maximum torque/ rated torque	Blockage current/ rated current
FYQQ 112M-4	two point seven	six point two	one thousand four hundred and fifty	eighty-five	zero point eight five	twelve	three	nineteen
FYQQ 132M1-4	three	six point seven	one thousand four hundred and forty	eighty-five	zero point eight two	twelve	three	nineteen
FYQQ 132M2-4	three point seven	eight point six	one thousand four hundred and thirty	eighty-six	zero point eight two	twelve	three	nineteen

Installation form and external dimensions of FYQQ series three-phase asynchronous motors for textile use

frame size

installation dimensions

Overall dimensions

◁

FYQQ
112M-4

one hundred and ninety

one hundred and forty

seventy-six

thirty-four

M16

sixty

ninety

one hundred and twelve

two hundred and twenty-four

two hundred and seventy

four hundred and five

FYQQ
132M1-4

two hundred and sixteen

one hundred and seventy-eight

eighty-seven

thirty-four

M16

sixty

ninety

one hundred and thirty-two

two hundred and seventy-five

three hundred and fifteen

five hundred and twenty

FYQQ
132M2-4

two hundred and sixteen

one hundred and seventy-eight

eighty-seven

thirty-four

M16

sixty

ninety

one hundred and thirty-two

two hundred and seventy-five

three hundred and fifteen

five hundred and twenty

FYQQ series three-phase asynchronous motor for textile use

[Textile motor]FYD type three-phase asynchronous motor for electric ingots

2026-6-15 14:21:53

FYD electric ingot three-phase asynchronous motor is a three-phase squirrel cage variable frequency speed control motor with a rated frequency of 150Hz, rated voltage of 160V, extremely fast speed of nearly 9000r/min, and extremely high operating accuracy requirements.

The FYD type electric ingot three-phase asynchronous motor is mainly matched with the 535 or R535A type adhesive filament anti spinning machine, used in the chemical fiber industry to fine twist chemical fibers.

[Textile motor]FXM series high-efficiency three-phase asynchronous motors for textile use

2026-6-15 14:21:44

The FXM series high-efficiency three-phase asynchronous motor (hereinafter referred to as the motor) is specifically designed for use with cotton suction fans on spinning machines. The electric motor itself does not have fan blades and is cooled by a cotton suction fan.
The installation structure of the FXM series high-efficiency three-phase asynchronous motor for textile use is 1MB5, which is horizontal, with a base without feet and a flange on the end cover. The protection level is IP44, the cooling method is ICO141, and the working mode is S1 (continuous).

Altitude: �� 1000m
Environmental temperature: -15 �� -40 ��;
Relative humidity: �� 90%;
Rated power supply: three-phase 380V, 50Hz.

model	Rated power kW	When fully loaded				Stuck torque/Stuck torque (times)	Maximum torque/locked rotor torque (times)	Locked rotor current/locked rotor torque (times)	weight kg
model	Rated power kW	current A	efficiency %	power factor COS��	speed r/min	Stuck torque/Stuck torque (times)	Maximum torque/locked rotor torque (times)	Locked rotor current/locked rotor torque (times)	weight kg
FXD100L1-2	one point five	three point one zero	eighty-three	zero point eight five five	two thousand eight hundred and fifty	eight	two	two point two	forty-six
FXD100L2-2	two point two	four point four four	eighty-four point five	zero point eight five zero	two thousand eight hundred and fifty	eight	two	two point two	forty-eight

Motor model	Power	Current	rated speed	power factor	efficiency	locked-rotor current	Locked rotor torque	maximum torque	weight
	Power	Current	rated speed	power factor	efficiency	rated current	rated torque	rated torque	weight
	KW	A	r/min	cos��	��%	Ist/In	Tst/Tn	Tm/Tn	kg
FXM 100L1-2	one point five	three point two zero	two thousand eight hundred and eighty	zero point eight five zero	eighty-three point eight	eight	two	two point two	thirty-five
FXM 100L2-2	two point two	four point seven zero	two thousand eight hundred and eighty	zero point eight five zero	eighty-three point eight	eight	two	two point two	thirty-nine
FXM 100L3-2	three	six point four zero	two thousand eight hundred and eighty-five	zero point eight five zero	eighty-three point eight	eight	two	two point two	forty-two

[Textile motor]JF02 series textile three-phase asynchronous motor

2026-6-15 14:21:35

purpose
The JF02 series textile three-phase asynchronous motor is a closed self fan cooling type with high power and energy indicators. It is suitable for textile machinery such as cotton, linen, wool, silk, and synthetic fibers, and is suitable for working in environments with high dust, short fibers, and high temperature and humidity.

model	rated power (kw)	rated current (A)	Speed (r/min)	Efficiency (%)	power factor (cos��)	Blockage current/ rated current	Locked rotor torque/ rated torque	Maximum torque/ rated torque
JFQ2-61-4	ten	nineteen point one five	one thousand four hundred and fifty	eighty-nine	zero point eight nine	seven	one point seven	two point two
JFQ2-62-4	thirteen	twenty-four point six	one thousand four hundred and fifty	eighty-nine point five	zero point eight nine five	seven	one point seven	two point two
JFQ2-62B-4	fifteen	twenty-eight point three	one thousand four hundred and fifty	eighty-nine point five	zero point nine	seven	one point seven	two point two
JFQ2-61-6	seven point five	eighteen point five	nine hundred and sixty	eighty-eight	zero point eight five	six point five	one point seven	two point two
JFQ2-62-6	ten	twenty point six	nine hundred and sixty	eighty-eight point five	zero point eight six	six point five	one point seven	two point two
JFQ2-51B-6	four point seven	ten point seven six	nine hundred and seventy	eighty-nine point seven five	zero point seven six	five point six	one point eight	two point two
JFQ2-52-6	five point five	twelve point six	nine hundred and seventy	eighty-seven	zero point seven seven	five point five	one point nine	two point two

[Textile motor]YCF series three-phase asynchronous motor for textile fans

2026-6-15 14:21:27

The YCF series fan specific motor is designed specifically for axial flow fans and is a derivative product of the Y series three-phase asynchronous motor. It has the characteristics of low noise, light weight, and durability.
Protection level: IP55
Cooling method: IC0041
Insulation level: B
Rated voltage: 380V
Rated frequency: 50HZ

Appearance and installation dimensions of three-phase asynchronous motors for YCF series textile fans

Motor model	Power	Current	rated speed	power factor	efficiency	locked-rotor current	Locked rotor torque	maximum torque
	Power	Current	rated speed	power factor	efficiency	rated current	rated torque	rated torque
	KW	A	r/min	cos��	��%	Ist/In	Tst/Tn	Tm/Tn
YCF 90S01-2	zero point seven five	one point seven	two thousand eight hundred and forty	zero point eight five	seventy-nine	seven	two	two point three
YCF 90S02-2	one point one	two point five	two thousand eight hundred and forty	zero point eight seven	eighty-two	seven	two	two point three
YCF 90S1-2	one point five	three point four	two thousand eight hundred and forty	zero point eight eight	eighty-two	seven	two	two point three
YCF 90S2-2	one point eight	three point nine	two thousand eight hundred and forty	zero point eight eight	eighty-two	seven	two	two point three
YCF 90L-2	two point two	four point six	two thousand eight hundred and forty	zero point eight eight	eighty-two	seven	two	two point three
YCF 132S01-2	two point two	four point seven	two thousand eight hundred and ninety	zero point eight five	eighty-eight	seven	two	two point three
YCF 132S02-2	three	six point four	two thousand eight hundred and ninety	zero point eight five	eighty-eight	seven	two	two point three
YCF 132S01-3	four	eight point one	two thousand eight hundred and ninety	zero point eight five	eighty-eight	seven	two	two point three
YCF 132S1-2	five point five	ten point five	two thousand nine hundred and ten	zero point eight six	eighty-eight	seven	two	two point three
YCF 132S2-2	six	eleven point four	two thousand nine hundred and ten	zero point eight six	eighty-eight	seven	two	two point three
YCF 132L3-2	seven point five	fifteen	two thousand nine hundred and ten	zero point eight six	eighty-eight	seven	two	two point three

[Textile motor]FO2 series textile three-phase asynchronous motor

2026-6-15 14:21:19

Product Details:

The FO2 series three-phase asynchronous motor is designed based on the FO series motor. Among them, FO2-7 is specially designed for driving the carding machine cylinder (large drum), which is a closed self cooling type suitable for environments with high dust, short fibers, and high temperatures. It can also be used in machinery with similar working conditions.

Main technical data of FO2 series three-phase asynchronous motor (380V, 50Hz)

[Textile motor]FW, FW2 series three-phase asynchronous motors

2026-6-15 14:21:10

FW and FW2 series three-phase asynchronous motors detailed description:

Purpose:

The FW and FW2 series three-phase asynchronous motors are suitable for driving various textile machines and other machinery such as cotton, wool, linen, silk, and spun silk. It can work in environments with high dust, short fibers, and high temperature and humidity.

Main technical data:

Note:
1. T3 type: The machine base does not have a foot, and there is a small flange on the end cover.
2. Type C: There is a large flange on the end cap and a sealing ring on the shaft hole.
3. Y-shaped: The end cap has a large flange, the shaft hole has a sealing ring, and the shaft extension end has an M screw hole.
4. YY type: biaxial extension.
5. M-type: The shaft extension end has an M-screw hole.
6. T-type: Voltage of 36 volts.
7. Z-type: The shaft extension is conical and the shaft head has internal threads.

Appearance and installation dimensions:
2. FW, FW2 series D2/T2 type:

2. FW, FW2 series D2/T3 models:

Note:
1. The old standards D2 and T2 are the same as the new standards B3 and B5
2. The pattern is D2/T2 type, with a base and a flange on the end cover.
3. D2 type machine base with feet, no flange on end cover, no dimensions M, N, P, S, h2
4. The T2 type machine base has no footings and a flange on the end cover, without dimensions A, B, C, AB, K, H, b3

[Textile motor]FO3 series textile three-phase asynchronous motor

2026-6-15 14:21:01

Product Details:

The FO3 series three-phase asynchronous motor is a closed self cooling three-phase asynchronous motor, suitable for working in textile machinery such as cotton, linen, wool, silk, and environments with high dust, short fibers, and high temperature and humidity.

Main technical data (380V, 50Hz)

Appearance and installation dimensions (mm)

[Textile motor]FXD series high-efficiency three-phase asynchronous motors for textile use

2026-6-15 14:20:53

Product Details:

The FXD series high-efficiency three-phase asynchronous motor has high efficiency indicators, good energy-saving effects, and is mainly suitable for textile machinery such as fine yarn machines. It also has the ability to prevent fiber blockage.

Main technical data of FXD series high-efficiency three-phase asynchronous motor for textile use (380V, 50Hz)

FXD series high-efficiency three-phase asynchronous motor for textile, appearance and installation dimensions (mm)

model	polar number	Rated power kW	When fully loaded				Stuck torque/Stuck torque (times)	Maximum torque/locked rotor torque (times)	Locked rotor current/locked rotor torque (times)	weight kg
model	polar number	Rated power kW	current A	efficiency %	power factor COS��	speed r/min	Stuck torque/Stuck torque (times)	Maximum torque/locked rotor torque (times)	Locked rotor current/locked rotor torque (times)	weight kg
FXD180M1-4/6	four	fifteen	twenty-eight point one	ninety-two	zero point eight eight	one thousand four hundred and eighty	one point seven	two point two	eight	one hundred and ninety-eight
FXD180M1-4/6	six	seven	twenty-one point nine	eighty-nine	zero point five six	nine hundred and eighty-five	one point seven	two	eight	one hundred and ninety-eight
FXD180M2-4/6	four	seventeen	thirty-one point eight	ninety-two	zero point eight eight	one thousand four hundred and eighty	one point seven	two point two	eight	two hundred and eight
FXD180M2-4/6	six	nine	twenty-seven point four	eighty-nine	zero point five six	nine hundred and eighty-five	one point seven	two	eight	two hundred and eight
FXD180L-4/6	four	eighteen point five	thirty-four point six	ninety-two	zero point eight eight	one thousand four hundred and eighty	one point seven	two point two	eight	two hundred and eighteen
FXD180L-4/6	six	eleven	thirty-three point four	eighty-nine	zero point five six	nine hundred and eighty-five	one point seven	two	eight	two hundred and eighteen

model	power	current	speed	power factor	efficiency	locked-rotor current	Locked rotor torque	maximum torque	connection method	weight
	power	current	speed	power factor	efficiency	rated current	rated torque	rated torque		weight
	KW	A	r/min	cos��	��%	Ist/In	Tst/Tn	Tm/Tn		kg
FXD2-180MO-4/6	13/6	24.7/20.6	1480/990	0.87/0.5	92/88.5	8/8.5	1.5/2.2	2/2.5	4Y/3Y	one hundred and seventy
FXD2-180M1-4/6	15/7	28.5/21	1480/990	0.87/0.55	92/88.5	8/8.5	1.5/2.2	2/2.5		one hundred and eighty
FXD2-180M2-4/6	17/9	32.1/28.1	1480/990	0.87/0.55	92/88.5	8/8.5	1.5/2.2	1.8/2.5		one hundred and ninety
FXD2-180L1-4/6	18.5/11	35/31.3	1480/990	0.87/0.6	92.5/89	8/8.5	1.5/2.2	1.8/2.5		two hundred
FXD2-180L2-4/6	22/11	41.6/31.3	1480/990	0.87/0.6	92.5/89	8/8.5	1.5/2.2	1.8/2.5		two hundred and ten

[Textile motor]FVX series high-efficiency variable frequency speed regulation three-phase asynchronous motor

2026-6-15 14:20:45

Product Details:

The FVX series high-efficiency variable frequency speed regulation three-phase asynchronous motor is mainly a derivative series of FX motor, which adopts net flow air cooling structure and has strong anti fiber blockage ability. It is suitable for working in environments with high dust, short fibers, and high temperature and humidity. It is powered by a frequency converter and has balanced speed regulation.

Various resolution sensors (photoelectric encoders, rotary transformers, and speed generators) and electromagnetic brakes (both powered on and powered off) can be equipped according to user requirements.

The FVX series high-efficiency variable frequency speed regulation three-phase asynchronous motor is a continuous working system S1, with a rated voltage of 380V, a rated frequency of 50Hz, a protection level of IP44 (can be manufactured according to user requirements according to IP54), an insulation level of F, and a fully enclosed axial flow fan cooling method (IC416). The motor has strong overload capacity and good low-speed performance.

Main technical data of FVX series high-efficiency variable frequency speed regulation three-phase asynchronous motor (380V, 50Hz)

FVX series high-efficiency variable frequency speed regulation three-phase asynchronous motor appearance and installation dimensions (mm)

1. FVX series B35 type:

Note:
1. The figure shows a B35 pattern, with a base and a flange on the end cover, and H80-90 without lifting rings.
2. B3 type machine base with feet, no flange on end cover, no dimensions M, N, P, R, S, T.
3. The B5 type machine base has no footings and a flange on the end cover, without dimensions A, B, C, or AB.
4. The mounting holes S for the H225-H355 motor flange are evenly distributed across 8 holes.
5. R is the distance from the flange mating surface to the shaft extension shoulder.

[Textile motor]FGX series high-efficiency three-phase asynchronous motor

2026-6-15 14:20:35

The FGX series high-efficiency three-phase asynchronous motor is designed to be matched with textile machinery such as fine yarn machines. It is a fully enclosed self fan cooling type and suitable for various textile machinery such as cotton, wool, linen, and silk. It can work reliably in environments with high dust, short fibers, and high temperature and humidity.

The FGX series high-efficiency three-phase asynchronous motor has two types: single speed and dual speed (4/6), with a dual speed 4/6 pole connection of 4Y/3Y.

Main technical data (380V, 50Hz)

Appearance and installation dimensions (mm)

Note: B1 and K1 are additional installation dimensions required by Shanghai Second Textile Machinery Factory.

Ordering Notice:
When placing an order, it is necessary to specify the motor model, power, voltage, frequency, insulation level, installation type, etc.
2. The left-hand type (facing the shaft extension end, with the junction box on the left) is represented by the letter "L".
3. If the user requires a wet tropical motor, please add the letter "TH" after the prototype number.
4. If there are any other special requirements, such as thermal protection, please specify them in the contract.
5. This sample material provides data for user reference only. If there are any changes to the specific data, the updated version shall prevail.

[Textile motor]FSM type textile three-phase asynchronous motor

2026-6-15 14:20:27

Product Details:

FSM type textile three-phase asynchronous motor is specially designed for carding machine cylinder, mainly suitable for working under conditions of high rotational inertia, long starting time requirements, high dust, short fibers, and high temperature and humidity.

Main technical data of FSM type textile three-phase asynchronous motor (380V, 50Hz)

Appearance and installation dimensions (mm)

model	rated power	current	speed	power factor	efficiency	locked-rotor current	Locked rotor torque	maximum torque	weight
	rated power	current	speed	power factor	efficiency	rated current	rated torque	rated torque	weight
	KW	A	r/min	cos��	��%	Ist/In	Tst/Tn	Tm/Tn	kg
FSM 150M2-4	three	six point five	one thousand four hundred and forty	zero point eight four	eighty-four	six point five	three	three point five	ninety-five
FSM 150M3-4	four	eight point six	one thousand four hundred and forty	zero point eight four	eighty-four	six point five	three	three point five	one hundred
FSM 160M2-4	five point five	eleven point nine	one thousand four hundred and forty	zero point eight four	eighty-four	six point five	three	three point five	one hundred and ten
FSM 160M3-4	seven point five	sixteen point one	one thousand four hundred and forty	zero point eight four	eighty-four	six point five	three	three point five	one hundred and fifteen

[Textile motor]JFO3 Textile specific three-phase asynchronous motor

2026-6-15 14:20:18

Overview

JFO3-61-4/6,15/7Kw�� JFO3-61B-6,15Kw is a fully enclosed self fan cooled squirrel cage three-phase asynchronous motor designed specifically for textile machinery, which is easy to use.
The JFO3-61 motor has high efficiency and power factor, and is characterized by energy saving, good performance, smooth and reliable operation, and low vibration.

Terms of Use
1. Power supply: 380V, 50HZ.
2. Usage environment: The temperature of the surrounding cooling medium is �� 40 ��, the relative humidity is<85%, and the altitude does not exceed 1000m.
3. Work system: SI (continuous)

Product Details:

The JFO3 series three-phase asynchronous motor is a closed self fan cooling type with high power and energy indicators, suitable for textile machinery such as cotton, linen, wool, silk, etc. It is suitable for working in environments with high dust, short fibers, and high temperature and humidity. Its dual speed motor is mainly designed for supporting fine yarn machines.

Main technical data (380V, 50Hz)

Appearance and installation dimensions (mm)

model	rated power (kw)	rated current (A)	Speed (r/min)	Efficiency (%)	power factor (cos��)	Blockage current/ rated current	Locked rotor torque/ rated torque	Maximum torque/ rated torque
JFQ3-61A-6/4	7/15	16.9/29.2	960/1460	82/88	0.76/0.88	6/7	1.1/1.7	2/2.2
JFQ3-61B-6/4	9/17	21.6/33.3	960/1460	86/88	0.72/0.88	7/7	1/1.5	1.7/2.2
JFQ3-62-12/4	3.3/10	9.9/19.5	460/1460	72/86.5	0.70/0.801	5/7.5	1/1.2	1.5/2
JFQ3-62B-6/4	11/12	26.1/24.1	960/1460	85/89.5	0.75/0.885	5/7	1/1.5	1.7/2.2
JFQ3-63-12/4	5/15	14.4/29.2	460/1460	74/87	0.71/0.89	5/7.5	1/1.2	1.5/2

[Textile motor]FX series high-efficiency three-phase asynchronous motors for textile use

2026-6-15 14:20:10

FXϵ�и�Ч��첽�綯��

һ��;
�� FXϵ�и�Ч��첽�綯��и�Ч��ָ�꣬�书�ʵȼ��Ͱ�װ�ߴ��IEC��ʵ繤ίԱ��׼��ȼ�ΪIP44��з��ά��ر��ڷ�֯��ҵ��ƵĹ��Ӧ�á�

��FXϵ�з�֯�ø�Ч��첽�綯��ݣ�380V��50HZ��

�ͺ�	��� ��KW	��ʱ				��ת��	��תת��	��ת��	�� kg
�ͺ�	��� ��KW	��A	ת��r/min	Ч��%	��	���	�ת��	�ת��	�� kg
FX90S-2	1.1	2.29	2810	82	0.855	8	2	2.2
FX90L1-2	1.3	2.70	2810	82.5	0.855	8	2	2.2
FX90XL2-2	1.5	3.10	2850	83	0.855	8	2	2.2
FX100L1-2	1.8	3.81	2850	84	0.855	8	2	2.2
FX100L2-2	2.2	4.66	2850	84.5	0.85	8	2	2.2
FX112M1-2	2.6	5.35	2850	85.5	0.865	8	2	2.2
FX112M2-2	3	6.06	2860	86.5	0.87	8	2	2.2
FX112M3-2	3.5	7.03	2860	87	0.87	8	2	2.2
FX132S1-2	4	7.86	2860	89	0.87	8	2	2.2
FX132S2-2	4.7	9.23	2860	89	0.87	8	2	2.2
FX132M1-2	5.5	10.81	2900	89	0.87	8	1.8	2.2
FX132M2-2	6.3	12.31	2900	89.5	0.87	8	1.8	2.2
FX132M3-2	7.5	14.71	2900	89.7	0.87	8	1.8	2.2
FX90S-4	0.75	1.80	1410	82	0.76	8	2	2.2
FX90L-4	1.1	2.57	1410	82.5	0.78	8	2	2.2
FX100L1-4	1.3	3.09	1410	83	0.77	8	2	2.2
FX100L2-4	1.5	3.48	1410	84	0.78	8	2	2.2
FX100L3-4	1.8	4.13	1410	85	0.78	8	2	2.2
FX112M1-4	2.2	4.77	14301430	86.5	0.81	8	2	2.2
FX112M2-4	2.6	5.58	1430	87.5	0.81	8	2	2.2
FX112M3-4	3	6.40	1430	88	0.81	8	2	2.2
FX112M4-4	3.5	7.53	1430	88	0.81	8	2	2.2
FX112M5-4	4.5	9.87	1430	88	0.81	8	2	2.2	52
FX132S1-4	3.5	7.25	1430	88.5	0.83	8	2	2.2
FX132S2-4	4	8.26	1440	88.7	0.83	8	2	2.2	72
FX132M1-4	4.7	9.71	1440	88.7	0.83	8	2	2.2
FX132M2-4	5.5	11.26	1440	89.5	0.83	8	2	2.2	81
FX132M3-4	6.3	12.7	1440	90	0.84	8	2	2.2
FX160S1-4	7.5	14.7	1480	91.2	0.85	8.5	1.7	2.2	135
FX160S2-4	8.6	16.6	1480	91.5	0.86	8.5	1.7	2.2
FX160S3-4	11	20.9	1480	91.8	0.87	8.5	1.7	2.2
FX160M1-4	13	24.7	1480	92	0.87	8.5	1.7	2.2
FX160M2-4	15	28.5	1480	92.2	0.87	8.5	1.7	2.2	163
FX180M1-4	17	32	1480	93	0.87	8.5	1.7	2.2
FX180M2-4	18.5	34.8	1480	93	0.87	8.5	1.7	2.2	220
FX180L-422	22	41.3	1480	93.3	0.87	8.5	1.7	2.2
FX200L-430	30	55.9	1480	93.7	0.87	8.5	1.7	2.2
FX225S-437	37	68.7	1480	94	0.87	8.5	1.7	2.2
FX225M-4	45	83.5	1480	94.1	0.87	8.5	1.7	2.2

[Textile motor]JFO2 series three-phase asynchronous motor

2026-6-15 14:20:01

һ��;

JFO2ϵ��첽�綯��Ϊ��ʽ��нϸߵ��ָ�꣬��ޡ��顢ë��˿��˵ȷ�֯��е��ڶ೾��ά��ʪ�ȽϸߵĻ��й��

��JFO2ϵ��첽�綯��Ҫ��ݣ�380V��50HZ��

�ͺ�	��� ��KW	��ʱ				��ת ��	��ת ת��	�� ת��	�� kg
�ͺ�	��� ��KW	��A	ת��r/min	Ч��%	��	� ��	� ת��	� ת��	�� kg
JFO2-21-2	1.1	2.4	2850	81	0.86	7	2	2.5	25
JF02-21B-2	1.3	2.8	2850	81.5	0.865	7	2	2.5	25
JFO2-22-2	1.5	3.18	2850	82.5	0.87	7	2	2.5	30
JFO2-22B-2	1.8	3.76	2850	83.5	0.87	7	2	2.5	30
JFO2-31-2	2.2	4.58	2880	84	0.87	7	2	2.5	37
JFO2-31B-2	2.6	5.35	2880	84.5	0.875	7	2	2.5	37
JFO2-32-2	3.0	6.1	2880	85	0.88	7	2	2.5	43
JFO2-32B-2	3.5	7.02	2880	85.5	0.885	7	2	2.5	43
JFO2-21-4	0.8	1.89	1420	80	0.80	7	2	2.5	25
JFO2-22-4	1.1	2.51	1420	81.5	0.815	7	2	2.5	30
JFO2-31A-4	1.3	2.93	1420	82	0.82	7	2	2.5	37
JFO2-31-4	1.5	3.3	1420	83	0.83	7	2	2.5	37
JFO2-32A-4	1.8	3.87	1420	84	0.84	7	2	2.5	43
JFO2-32-4	2.2	4.61	1420	85	0.85	7	2	2.5	43
JFO2-41A-4	2.6	5.38	1420	85.5	0.855	7	2	2.5	56
JFO2-41-1	3.0	6.14	1420	86	0.86	7	2	2.5	58
JFO2-41B-4	3.5	7.09	1420	86.5	0.865	7	2	2.5	60
JFO2-42-4	4.0	8.0	1420	87	0.87	7	2	2.5	68
JFO2-42B-4	4.7	9.3	1420	87.5	0.875	7	2	2.5	75
JFO2-51-4	5.5	10.76	1440	88	0.88	7	1.7	2.2	92
JFO2-51B-4	6.5	12.7	1440	88	0.88	7	1.7	2.2	102
JFO2-52-4	7.5	14.6	1440	88.5	0.88	7	1.7	2.2	109
JFO2-52B-4	8.6	16.4	1440	89	0.885	7	1.7	2.2	110
JFO2-61-4	10	19.2	1450	89	0.89	7	1.7	2.2	141
JFO2-62-4	13	24.6	1450	89.5	0.895	7	1.7	2.2	159
JFO2-62B-4	15	28.3	1450	89.5	0.90	7	1.7	2.2	165
JFO2-21-6	0.6	1.64	940	77	0.72	6.5	2	2.5	25
JFO2-22-6	0.8	2.13	940	78	0.73	6.5	2	2.5	30
JFO2-31-6	1.1	2.85	950	79	0.74	6.5	2	2.5	37
JFO2-32A-6	1.3	3.29	950	80	0.75	6.5	2	2.5	43
JF02-32-6	1.5	3.69	950	81	0.76	6.5	2	2.5	43
JFO2-41A-6	1.8	4.32	960	82	0.77	6.5	1.8	2.2	56
JFO2-41-6	2.2	5.14	960	83	0.78	6.5	1.8	2.2	58
JFO2-41B-6	2.6	5.93	960	84	0.79	6.5	1.8	2.2	60
JFO2-42-6	3	6.67	960	85	0.80	6.5	1.8	2.2	68
JFO2-42B-6	3.5	7.66	960	85.5	0.81	6.5	1.8	2.2	75
JFO2-51-6	4	8.58	970	86	0.82	6.5	1.7	2.2	92
JFO2-51B-6	4.7	9.97	970	86.5	0.825	6.5	1.7	2.2	102
JFO2-52-6	5.5	11.54	970	87	0.83	6.5	1.7	2.2	109
JFO2-52B-6	6.5	13.5	970	87.5	0.835	6.5	1.7	2.2	117
JFO2-61-6	7.5	15.3	960	88	0.85	6.5	1.7	2.2	147
JFO2-62-6	10	20	960	88.5	0.86	6.5	1.7	2.2	170
JFO2-41-4/16	1.8/0.5	4.62/4.32	1470/350	74/32	0.80/0.55	8/4.5	1.7/1.5	2.6/1.6	60
JFO2-41-4/16	2.2/0.5	5.65/4.32	1470/350	74/32	0.80/0.55	8/4.5	1.7/1.5	2.6/1.6	60
JF02-42-4/16	3.5/0.8	8.31/6.27	1475/355	78/34	0.82/0.57	8/4.5	1.7/1.5	2.6/1.6	75

[Textile motor]FO series textile three-phase asynchronous motor

2026-6-15 14:19:53

1�� Purpose:

The FO series three-phase asynchronous motor is specially designed for various weaving machines. It is a closed self cooling type with a smooth surface and no heat dissipation fins. It has high power performance indicators and overload capacity, and is suitable for environments with high dust, short fibers, and high temperature and humidity. It can also be used with other machinery with similar working conditions.

2�� Main technical data (380V, 50HZ)

model	rated power KW	When fully loaded				locked-rotor current	Locked rotor torque	maximum torque	weight kg	Noise A
model	rated power KW	Current A	Speed r/min	Efficiency%	power factor	rated current	rated torque	rated torque	weight kg	Noise A
F052-6	zero point six	one point four six	nine hundred and sixty	eighty-three	zero point seven five	seven	one point seven	two point four	forty-three	eighty
F053-6	zero point eight	one point eight eight	nine hundred and sixty	eighty-four	zero point seven seven	seven	one point seven	two point four	forty-six	eighty
F054-6	one	two point two six	nine hundred and fifty	eighty-five	zero point seven nine	seven	one point seven	two point four	fifty	eighty-five
F055-6	one point three	two point nine eight	nine hundred and fifty	eighty-five	zero point seven nine	seven	one point seven	two point four	fifty-four	eighty-five
F056-6	one point five	three point four two	nine hundred and fifty	eighty-five	zero point seven nine	seven	one point seven	two point four	fifty-nine	eighty-five
F057-6	one point eight	four point zero seven	nine hundred and fifty	eighty-five	zero point seven nine	seven	one point seven	two point four	sixty-eight	eighty-five
F058-6	two point two	four point eight six	nine hundred and fifty	eighty-five	zero point seven nine	seven	one point seven	two point four	seventy-five	eighty-five
FI58-8	zero point six	one point five four	seven hundred and twenty	eighty-one	zero point seven three	six point five	one point seven	two point two	forty-six	eighty
FO54-8	zero point eight	one point nine eight	seven hundred and twenty	eighty-three	zero point seven four	six point five	one point seven	two point two	fifty	eighty-five
F055-8	one	two point three seven	seven hundred and twenty	eighty-four	zero point seven six	six point five	one point seven	two point two	fifty-two	eighty-five
F056-8	one point three	three point zero eight	seven hundred and twenty	eighty-four	zero point seven six	six point five	one point seven	two point two	fifty-five	eighty-five
F057-8	one point five	three point five three	seven hundred and twenty	eighty-four	zero point seven six	six point five	one point seven	two point two	sixty-five	eighty-five
F058-8	one point eight	four point one three	seven hundred and twenty	eighty-four	zero point seven six	six point five	one point seven	two point two	seventy-three	eighty-five

3�� FO series three-phase asynchronous motor appearance and installation dimensions

frame size	installation dimensions		Overall dimensions
frame size	C	K	L
fifty-two fifty-three	thirty-eight	fourteen	two hundred and seventy-five
fifty-four fifty-five fifty-six	forty-five	sixteen	two hundred and eighty-seven
fifty-seven fifty-eight	sixty-three point five	sixteen	three hundred and twenty-five

[Textile motor]YFJT series textile three-phase asynchronous motor

2026-6-15 14:19:45

YFJT100L-2A and YFJT100L-2B textile three-phase asynchronous motors are winding head motors specially designed for the chemical fiber industry, suitable for winding heads with speeds below 8000m/min and 18000m/min, respectively.

2�� Model Description

3�� YFJT series textile three-phase asynchronous motor technical parameter list

model	power ��kW��	frequency ��Hz��	voltage ��V��	current ��A��	speed ��r/min)	connection method	insulation class	Protection level	working system	weight ��kg��
YFJT100L-2A	two	thirty-seven	one hundred and forty-one	fourteen	one thousand and eight hundred	Y	H	IP44	S1	thirty-nine
	four	seventy-five	two hundred and eighty-six	ten	four thousand and two hundred
	three	one hundred and fifty	three hundred and eighty	five	eight thousand and eight hundred
YFJT100L-2B	six	seventy-five	two hundred and eighty-six	fifteen	four thousand and three hundred				S3 50%	forty-two
	four	one hundred	three hundred and eighty	seven point five	five thousand and nine hundred
	four	three hundred	three hundred and eighty	seven point five	seventeen thousand and seven hundred

4�� Work Curve Chart

5�� Appearance and installation dimensions
YFJT100L-2A YFJT100L-2AL YFJT100L-2AR YFJT100L-2BL YFJT100L-2BR External dimensions and installation dimensions:

6�� Ordering Guide
1.1 The following contents need to be clarified:
External dimensions, voltage, frequency range, power requirements for different frequency bands, number of poles, operating system, protection level, lead out requirements, etc.
1.2 If there are special requirements, we can also supply you after consultation between both parties.
1.3 The images and data provided in this sample are for reference only and are subject to change without prior notice.

[Textile motor]YFHD series textile three-phase asynchronous motor

2026-6-15 14:19:36

YFHD59-2P and YFHD56-2F textile three-phase asynchronous motors are specialized transverse motors for winding heads designed specifically for the chemical fiber industry, with maximum speeds of 8760r/min and 14500r/min, respectively. The above two series of motors have good speed regulation, good starting performance at both low and high speeds, and excellent characteristics of low vibration and low noise throughout the entire frequency range.

2�� YFHD series textile three-phase asynchronous motor model description

3�� Technical parameter list

model	power ��kW��	frequency ��Hz��	voltage ��V��	current ��A��	speed ��r/min)	connection method	insulation class	Protection level	working system	weight ��kg��
YFHD56-2P	zero point one	thirty-seven	one hundred and seventy-three	zero point seven five	two thousand and eighty	Y	H	IP44	S1	seven point five
	zero point two	seventy-five	two hundred and ninety-five	zero point seven zero	four thousand three hundred and forty
	zero point three	one hundred and fifty	three hundred and eighty	zero point six zero	eight thousand seven hundred and sixty
YFHD56-2F	zero point one	seventy-five	one hundred and seventy-three	one point four	two thousand and three hundred					seven point four
	zero point six five	one hundred	three hundred and eighty	one point five	five thousand eight hundred and ten
	zero point six five	three hundred	three hundred and eighty	one point three	fourteen thousand and five hundred

4�� YFHD series textile three-phase asynchronous motor working curve diagram

5�� Appearance and installation dimensions
YFHD56-2P YFHD56-2F Dimensions and Installation Dimensions:

6�� Ordering Guide
1.1 The following contents need to be clarified:
External dimensions, voltage, frequency range, power requirements for different frequency bands, number of poles, operating system, protection level, lead out requirements, etc.
1.2 If there are special requirements, we can also supply you after consultation between both parties.
1.3 The images and data provided in this sample are for reference only and are subject to change without prior notice.