Shanghai Huabang Industrial Business Network - Lightning arrester disconnector

[Lightning arrester disconnector]TLB-1 Hot melt explosive release device for lightning arrester

2026-6-20 14:24:23

The TLB-1 lightning arrester uses a hot melt explosive release device as a special matching product for the lightning arrester, which is used in series with the lightning arrester. When the lightning arrester fails, it can quickly act to remove the faulty lightning arrester from the power grid, and provide a clear disconnection sign for maintenance personnel to discover the fault point and replace the lightning arrester. On the other hand, when the lightning arrester is working normally, the disconnector does not move and exhibits low impedance, which does not affect the protection characteristics of the lightning arrester. The installation of a disconnector lightning arrester is the only way to truly achieve safe and maintenance free use, convenience and reliability. Separators are commonly used in distribution, power station, and line lightning arresters operating in developed countries and regions such as Europe, America, and Japan.

The disconnector adopts a new thermal explosion design, which has the advantages of fast response and error free operation, and can be used in conjunction with various types of lightning arresters above 3kV. The usage conditions are the same as those of lightning arresters.
The typical ampere second characteristic parameters of TLB-1 thermal explosive disconnector are as follows:

Current (A)	eight hundred	two hundred	twenty	five	zero point five	zero point zero five
Action time (S)	0.01��0.02	0.02��0.05	0.1��0.2	0.5��1.0	20~50	200~500

[Lightning arrester disconnector]GLF-RTC type lightning arrester disconnector

2026-6-20 14:24:14

The GLF-RTC type lightning arrester disconnector is a device that can disconnect the lightning arrester lead from the system when the lightning arrester is damaged to eliminate continuous system faults and provide visible signs of the accident lightning arrester. GLF-RTC type disconnector, product performance meets the requirements of IEC60099-4.

Ampere second characteristics of lightning arrester disconnector

Action current	Power frequency current			Square wave impulse current tolerance	High current tolerance
Action current	twenty	two hundred	eight hundred	six hundred	six hundred
Action Time	<0.5	<0.04	<0.02	..	..

GLF-RTC type lightning arrester disconnector

[Lightning arrester disconnector]TL-1 type disconnector

2026-6-20 14:24:06

The TL-1 type lightning arrester disconnector is a device that can disconnect the lightning arrester lead from the system when the lightning arrester is damaged to eliminate continuous system faults and provide visible signs of the accident lightning arrester. TL-1 type disconnector, product performance meets the requirements of IEC60099-4.

Ampere second characteristics of lightning arrester disconnector

Action current	Power frequency current			Square wave impulse current tolerance	High current tolerance
Action current	twenty	two hundred	eight hundred	six hundred	six hundred
Action Time	<0.5	<0.04	<0.02

TL-1 type disconnector

[Lightning arrester disconnector]TLQ type lightning arrester supporting disconnector

2026-6-20 14:23:57

The TLQ type lightning arrester is equipped with a detachment device as a special supporting product of the lightning arrester, which is used in series with the lightning arrester. When the lightning arrester fails, it can quickly operate to remove the faulty lightning arrester from the power grid, and provide a clear detachment sign for maintenance personnel to discover the fault point and replace the lightning arrester. On the other hand, when the lightning arrester is working normally, the disconnector does not move and exhibits low impedance, which does not affect the protection characteristics of the lightning arrester. The installation of a disconnector lightning arrester is the only way to truly achieve safe and maintenance free use, convenience and reliability. Separators are commonly used in distribution, power station, and line lightning arresters operating in developed countries and regions such as Europe, America, and Japan.

The disconnector adopts a new thermal explosion design, which has the advantages of fast response and error free operation, and can be used in conjunction with various types of lightning arresters above 3kV. The usage conditions are the same as those of lightning arresters.
The typical ampere second characteristic parameters of the disconnector are as follows:

Current (A)	eight hundred	two hundred	twenty	five	zero point five	zero point zero five
Action time (S)	0.01��0.02	0.02��0.05	0.1��0.2	0.5��1.0	20~50	200~500

TLQ type lightning arrester supporting disconnector

[Lightning arrester disconnector]Separators for metal oxide surge arresters in non effectively grounded neutral power systems

2026-6-20 14:23:49

Separators for metal oxide surge arresters in non effectively grounded neutral power systems

[Lightning arrester disconnector]TLQ-Z Separators for Metal Oxide Surge Arresters in Neutral Point Effective Grounding Power Systems

2026-6-20 14:23:39

Detacher for Metal Oxide Surge Arrester in TLQ-Z Neutral Point Effective Grounding Power System