Shanghai Huabang Industrial Business Network - timer

[timer]APT1 Programmable Timer

2026-6-14 10:58:55

APT1 Programmable Timer

Seven days a week, programmable timed loop control can be implemented, with 10 sets of ON and 10 sets of OFF set for each day/week, and the machine can be turned on and off in different time periods
15 week combinations to choose from
Equipped with rechargeable batteries, it can maintain program memory for a long time during power outages

Size (mm)		48H×48W×84D
Installation and its base		Exposed type: P2CF-08 Embedded type: Y-50&US-08 or Y-50&P3G-08
rated voltage		100~240VAC 50/60Hz
Voltage Range		85~110% of rated voltage
time range		1min~168hr
controlled output		1C 15A
Setting error		<±2 sec/day
power consumption		3VA
Return time		0.5sec max
longevity fate	Mechanics	5×10^6 times
	Electrical	10^5 times
Return time		0.5sec max
power consumption		3VA
Environmental temperature for use		-25��~+60��
Environmental humidity for use		<95%RH
weight		130g

APT1 Programmable Timer Wiring Diagram Program Overlapping Output Timing Diagram

APT1 programmable timer appearance size diagram

APT1 Programmable Timer

[timer]XY-A2 Electronic Timer

2026-6-14 10:24:02

Features:

1. Timer is a power switch control device composed of a single-chip microprocessor as the core and electronic circuits.
2. This product is widely used for automatic power on and off of household appliances.
3. It can automatically control various household appliances and lighting fixtures such as rice cookers, electric water heaters, air conditioners, etc.

Characteristics:

Model:	XY-A2
Power supply voltage:	220VAC 50~60HZ ±15%
Internal battery voltage:	1.5VDC AA7#
Electricity consumption:	��1.5VA
Control output:	10A, 250VAC (resistive load) 16A, 250VAC (resistive load)
Display device:	LED display
Travel time error:	Less than 1 second per day
Switching frequency:	Switch 1-16 times per day/week cycle
Ambient temperature	-10��~60��
ambient humidity:	45~85��RH
Mechanical lifespan:	�� 3000000 times
Installation method:	International single-phase three wire plug socket type

XY-A2 Electronic Timer

[timer]JFT-9A Electric vehicle charging timer

2026-6-14 10:23:44

JFT-9A electric vehicle charging timer applicable scope:

Charging timing control for electric bicycles, electric tricycles, mobile phones, and various battery packs; Countdown automatic control for various household appliances, etc.
Working voltage: 110-250V, load capacity: 1000W; power consumption:<1W; timing accuracy: ± seconds per hour; Punctuality time: 1-9 hours; Environmental temperature: -10~40 ��; Relative temperature: �� 90%; Atmospheric pressure: 86-106kPa.

Product Introduction:
The JFT-9A electric vehicle charging timer is a high-tech power timing management product mainly based on an 86R series microcomputer chip, equipped with LED display. It is powered by a high-performance switch power supply, ensuring accurate timing and stable and reliable switch performance; Strong voltage adaptability, working normally from 100V to 250V. The use of this product can completely solve the damage caused by overcharging of electric vehicle battery packs (various types of battery packs), as well as the damage to electricity bills caused by long-term idle consumption of high-power chargers that are turned off at regular intervals, the damage to electricity bills caused by long-term idle consumption of high-power chargers that are turned off at regular intervals, and the loss of electricity bills caused by long-term idle consumption of high-power chargers that are turned off at regular intervals (the maximum power of the charger is 300W, 3.3 hours per kilowatt hour). Therefore, using this product can extend the service life of the battery pack (compared to charging for more than 10 hours per day) for more than six months and save more than 50% of electricity; It is a green product that saves electricity and energy, and a good helper for families.

Usage:
Insert the timer into the power socket like a regular power plug, and then plug the charger into the timer socket. At this moment, the digital tube lights up. Display '0'; Indicates that the power is not connected. To charge, press and hold the setting button for 2 seconds; The digital tube flashes, then press the setting button to select the time to charge, press once to add one hour, press until 9 and return to 0 for cycling; After selecting the time (such as 4 hours), stop operating for 3 seconds. The decimal point in the digital display lights up, indicating that the circuit is connected and the charging timer starts. Every hour, the number decreases by one until it displays "0"; Indicate the end of charging and half turn off the charger power. When charging, if you need to adjust the charging time, you can long press the setting button for two seconds to make the characters flash and reset the time. To turn off the power, you can set the number to zero and it will be half closed; The button has a lock protection function, and if not pressed for more than two seconds, it will not have any adjustment effect.

[timer]JF-T03 socket electronic timer

2026-6-14 10:23:30

JF-T03 socket electronic timer

[timer]JF15B,TP8B16(DHC15B) Rail type multifunctional programmable timer

2026-6-14 10:12:53

summary:
1. 35mm standard guide rail installation, compact size, beautiful appearance, is an updated product of KG316T;
2. Real time control, 7-day or 24-hour preset cycle timing control;
3. One output, 8-stage on/off timing settings, 10 date combination modes;
4. The longest setting is 168 hours, and the shortest timing is 1 minute;
5. LCD display, backup high-capacity rechargeable battery, normal operation during power outage;
6. Switch between 12/24 hours, default is 24 hours.

Model Description

JF15B, TP8B16 (DHC15B) rail type multifunctional programmable timer technical parameters

Rated control voltage: AC220V ± 10% 50Hz	Number of contacts: 1 set for conversion	Timing error: �� 2 seconds/day (25 ��)
Switching frequency: 8 times on and 8 times off	Power consumption: 4.5VA (max)	Time control range: 1 minute to 168 hours
Power outage duration �� 15 days (after continuous power on for 48 hours)		Minimum timer time: 1 minute
Contact capacity: Resistive load: 16A/250VAC (COS ��=1); Inductive load: 2.5A/250VAC (COS ��=0.6); Control light: 1000W		Electrical lifespan: 100000 cycles (rated load) Mechanical lifespan: 1 million cycles
Environmental temperature: 35-85% RH	Operating environment temperature: -10~55 ��	Weight: Approximately 125g

Operating instructions
1. To start using the timer, please connect the rated control power supply and press the reset button "RESET".
2. Set the timer for the first time in 24-hour mode. If you want to switch to 12 hour mode, press and hold the "" key for 5 seconds, and the LCD will display "AM"; If you want to switch to 24-hour mode, please hold down the "" key for 5 seconds to return to 24-hour mode.
3. Programming Settings

step	button	Programming Content
one	Press' P '	When "1ON" appears, set the first group activation time;
2*	Press' D+'	Set a day or days of the week to activate;
three	Press' H+/M+'	Set the hours and minutes for the activation time;
four	Press' P '	Display "1OFF" and display "", set the first group shutdown time
five	Press' P '	Set a day or days of the week to close;
six	Press' H+/M+'	Set the hour and minute when closing;
seven	Repeat steps 2-6	Set 2-8 sets of timed activation and deactivation times;
8**	Press��	Setup completed

Note:
To cancel a certain timing setting, please press the "MANUAL" button, and the LCD will display "----=----"; Pressing the 'MANUAL' key again will return to the previous settings.
*10 date combination modes: (1. MO TU WE TH FR SA SU; 2. MO TU WE TH FR; 3. SA SU; 4. MO; 5. TU; 6. WE; 7. TH; 8. FR; 9. SA; 10. SU).
**If you do not need to set the 8-segment timer, please press "" to complete the setting and return to the real-time clock state.
4. Real time clock setting
(1) Simultaneously press "" and "D+" to set up rounding until the current week is displayed;
(2) Simultaneously press "" and "H+" to set up rounding until the current hour is displayed;
(3) Simultaneously press "" and "M+" to set up rounding until the current minute is displayed;
(4) Press' MANAUL 'to display' ON AUTO 'or' AUTO OFF '; If the automatic timing initial state needs to be turned on, select "ON AUTO"; if the automatic timing initial state needs to be turned off, select "AUTO OFF".
5. Press "MANAUL" to change the switch state, "ON" for long on, "OFF" for long off.

Overall dimensions

Note:
The date mode for setting the opening and closing time of the same period should be consistent;
Use according to the requirements specified in the technical parameters;
Internally containing high-capacity rechargeable batteries, please do not disassemble or put into fire.

[timer]JHK-01 series infrared sensing delay switch

2026-6-14 9:57:41

Performance indicators:
Working voltage: 160-250V (AC) Static power consumption current:<0.3mA
Environmental working temperature: -20 ��~50 �� Automatic delay time: 20 seconds~6 minutes
Control load power: 5-200W Induction distance: 6 meters
Induction angle: 140 degree cone angle load range incandescent lamp/energy-saving lamp/exhaust fan
Control illumination: 5LUX-500LUX (adjustable) Appearance size: 86X86X25mm

Specification Model	terminal	Emergency control	neutral wire	power control	load type	explanation
JHK-01	two	nothing	nothing	��100W	Incandescent/fluorescent lamp
JHK-01D	three	nothing	have	��200W	Any load
JHK-01/ED	four	Strong cutting type	have	��200W	Incandescent/fluorescent lamp
JHK-01/EMD	three	Strong cutting type	nothing	��200W	Incandescent/fluorescent lamp
Overall Dimensions	86X86X25mm		Fixed hole spacing		60 millimeters

JHK-01 series infrared induction delay switch

[timer]JHK-11 series infrared sensing delay switch

2026-6-14 9:57:32

Working voltage: 160-250V (AC) Static power consumption current:<1ma
Environmental working temperature: -20 ��~50 �� Automatic delay time: 20 seconds~6 minutes
Control load power: 5-200W Induction distance: 6 meters
Induction angle: 140 degree cone angle load range incandescent lamp/energy-saving lamp/exhaust fan
Control illumination: 5LUX-500LUX (adjustable)

Specification Model	terminal	Emergency control	neutral wire	power control	load type	explanation
JHK-11	three	nothing	have	��200W	Incandescent/fluorescent lamp
JHK-11/ED	four	Strong cutting type	have	��200W	Incandescent/fluorescent lamp
Overall Dimensions	�� 90x38mm		Fixed hole size		65 millimeters

JHK-11 series infrared induction delay switch

[timer]DSKG-16 electronic timer

2026-6-14 9:54:42

The DSKG-16 electronic timer can automatically turn on and off the power of various electrical devices according to the time set by the user. The controlled objects can be street lights, neon lights, billboard lights, production equipment, household appliances (rice cookers, water heaters, water dispensers, electric heaters), timed control of various chargers, as well as broadcasting and television equipment.

Performance indicators:

Standard working power supply 220V/50Hz
Timing error �� ± 2 seconds/day
Applicable power range: 180-240V
Environmental temperature -25~60 ��
Switching capacity, resistive 7A, inductive 3A
Relative temperature<95%
Power consumption<1VA
Dimensions 98 × 70 × 55mm
Time control range: 1 minute to 168 hours
Weight 120g
There are 16 sets of switch times, both manual and automatic

[timer]SB6717 Timer

2026-6-13 21:19:15

SB6717 Timer

Timing range: 15min~23h45min Power supply: 220V/50Hz

SB6717 Timer

[timer]ANPA8 Type 7 Minute Timer

2026-6-13 21:16:33

ANPA8 7-minute timer

[timer]ANY-180 Industrial 24 Hour Timer

2026-6-13 21:16:25

ANY-180 Industrial 24-hour Timer

[timer]ATP1003 Digital Display Timer

2026-6-13 21:16:16

Seven days a week with programmable timed loop control, 20 sets of ON and 20 sets of OFF can be set daily/week, with different time periods for on/off cycling -15 week combinations to choose from - equipped with rechargeable battery, can maintain program memory for a long time during power outages

ATP1003 digital display timer

[timer]ATP1002 Industrial 24 Hour Timer

2026-6-13 21:16:07

ATP1002 Industrial 24-hour Timer

[timer]ATP1001 Industrial 24 Hour Timer

2026-6-13 21:15:58

ATP1001 Industrial 24-hour Timer

[timer]SUL181h type timer

2026-6-13 19:27:26

SUL181h timer

·Quartz clock with backup power supply after 3 days;
·24-hour segmented switch dial;
·24-hour segmented switch dial;
·The program time unit is 15 minutes;
·Track installation;

Product specifications

Category		timer
model		SUL181h
Contact capacity		AC220V 16A
Switch dial		24h
contact resistance		��50m��
insulation resistance		��100m��
coil voltage		220V AC
life	electricity	ten^7times
	mechanical	ten^5times
ambient temperature		-40�桫��55��
Storage time		time 150h
set number of times		48 times
Switching time unit		30 minutes
Minimum switch time		30 minutes

SUL181h timer external dimensions SUL181h

SUL181h timer