Shanghai Huabang Industrial Business Network - soft starter

[soft starter]SRMR3 Intelligent Chinese Display Soft Starter

2026-6-17 16:19:33

Model meaning

The model of this soft starter is set with reference to asynchronous motors such as Y and YZ, and the typical current value corresponds to the Y series 4-pole motor.

Structure and Function
The composition of SRMR5 intelligent soft starter is shown in Figure 1. The main circuit is composed of directly anti parallel thyristors (or thyristor modules), and the transformer detects the motor current. The control circuit uses a microcontroller as the control core, and parameter settings and status display are completed using buttons and digital tubes. The structure is advanced, novel, simple, easy to operate, and practical.
In addition, it is equipped with relatively complete control input terminals and status output terminals: the R, S, and T input terminals are connected to a 3-phase AC380V power supply, and the output terminals U, V, and W are connected to the motor. The A angle of the thyristor is controlled to linearly increase the voltage output from the thyristor to the motor to the rated value, that is, the so-called slope to the top. The motor accelerates to the rated speed, completes soft start, and sends a bypass signal to make the bypass contactor close and switch to bypass operation, while fault detection still protects the motor.

Operating principle and system composition (see Figure 3)

SRMR3 Intelligent Chinese Display Soft Starter

[soft starter]SRMRZ3 Intelligent soft starter box

2026-6-17 16:19:04

SRMRZ3 Intelligent Soft Starter Box Model and Meaning

SRMRZ3 Intelligent Soft Starter Box

[soft starter]QGQ Series Solid State Soft Starter

2026-6-17 14:43:23

The QGQ series intelligent solid-state soft start device is a new type of starter designed for various 500KW and below low-voltage squirrel cage motors. It adopts advanced thyristor control technology and can control the starting current of the motor at the first set value according to the motor power and load conditions, achieving soft start of the motor. This device is compatible with the basic functions of existing starting equipment, and has the characteristics of reliable performance, simple use, easy maintenance, and automatic identification of phase sequence.

Scope of application

Water pump: By utilizing the pump control function, the phenomenon of water hammer caused by liquid flow impact during starting and stopping is reduced, saving system maintenance costs;
Ball mill: using voltage ramp to start, reducing gear torque wear, reducing maintenance workload, and extending service life;
Fan: Replacing traditional starters with solid-state soft starters reduces belt wear and mechanical impact;
Compressor: Utilizing current limiting to achieve smooth starting and reduce motor temperature rise;
Crusher: Utilizing locked rotor protection and quick protection to avoid mechanical failures and blockages that can cause the motor to overheat and burn out;
Conveyor machinery: By utilizing soft start and soft stop control, a smooth and gradual starting process and a smooth deceleration stopping process are achieved, avoiding damage to materials and equipment caused by impact.

working principle
The QGQ series cage motor solid-state soft starter collects current and voltage signals from the stator circuit of the motor, and controls the conduction state of three bidirectional thyristors through special transformation processing, thereby controlling the starting current and input power of the motor during operation, achieving the functions of automatic tracking of motor load changes and automatic adjustment of input power, and achieving the goal of soft starting and economic operation of the motor.
Adopting dual microcontroller full digital control, it can comprehensively display the working status of the motor;
Has strong anti-interference ability, which can ensure the reliable operation of the control system in complex industrial environments with strong interference;
It has three starting modes: constant current starting, voltage ramp starting, and pulse jump starting, suitable for various types of loads;
It has two parking methods: free parking and soft parking. The soft parking feature can meet the mechanical needs in different situations, and the soft parking time can be adjusted;
It has reliable overcurrent, overload, overheating, power phase loss, and output phase loss protection functions, making the starting and operation of the motor more reliable and safe;
Equipped with DCS remote control interface and computer RS485 interface; 4-20mA standard analog current output.

Main performance characteristics:
1. The starting time and starting current can be adjusted to meet the on-site requirements to the maximum extent and achieve the best starting effect;
2. Low starting current, high and stable starting torque;
3. Wide applicability, complete product specifications, and easy to use;
4. Small footprint and user-friendly interface;
5. The starting parameters can be adjusted arbitrarily according to the load type;
6. Multiple motors can be started separately;
7. Can be started continuously and frequently.

Environmental conditions for use

Power supply voltage: 3AC 380V/660V ± 10% 50HZ (three-phase four wire system);
Temperature: (-25~+5O) ��;
Humidity:<80%
Vibration:<1.5g
Altitude: 1500m
If users have special requirements, they should declare them in advance.

Model Description

Selection criteria

Conventional starting: For starting loads such as bow thrusters, compressors, elevators, centrifugal pumps, conveyor belts, elevators, etc., the selection can be based on the rated power of the motor;
Heavy load starting: such as starting centrifuges, crushers, mixers, grinders, mixers, etc., can be selected at 120% of their rated power. (Note: The cabinet type main circuit air switch is equipped with DZ20 series, and the AC contactor is equipped with CJ20 series)

Ordering Instructions
Determine the model of the motor based on its rated power, rated voltage, and operating conditions;
Provide all parameters on the motor nameplate.

[soft starter]GSS1 series soft starter

2026-6-17 14:43:14

GSS1 series soft starter

[soft starter]CDJ1 series motor soft starter

2026-6-17 14:43:06

Scope of application
The CDJ1 series motor soft starter is a high-power module component controlled by an advanced sixteen bit microcontroller as the core. It has multiple functions such as torque controlled soft start, current limiting start, dual slope soft start, full voltage start, soft stop, etc. The parameters can be set according to the load. Widely applicable to all industrial fields such as petroleum, metallurgy, petrochemicals, construction and mining, environmental protection, etc., it is the most ideal new generation product for motor power 5.5kW~500kW starting control.

CDJ1 series motor soft starter models and their meanings

structural characteristics
1. Adopting a 16 bit microcontroller for fully digital automatic monitoring;
2. The starting torque current and voltage time can be flexibly adjusted according to different loads to achieve the best current surge and torque control characteristics;
3. There is a dedicated secondary protection circuit with protection functions such as phase failure, overload, and overheating;
4. High level automatic water supply, remote control microcomputer interface;
5. The phase sequence can be automatically recognized and has phase sequence protection function;
6. The full digital setting and external control function greatly facilitate users;
7. Free stop and soft stop are available, and the stop time can be freely set;
8. The product has a novel structure, small size, reliable performance, and easy installation and operation.

Main technical parameters of CDJ1 series motor soft starter

Soft start control mode
1. Current limiting type:
Limit starting current, reduce starting voltage drop, adjust arbitrarily, keyboard settings.

2. Voltage controlled type:
Set the allowable voltage drop percentage, automatically measure the voltage drop, and limit the voltage drop.
Adaptive control of starting current by measuring voltage drop.
Debugging data is automatically memorized by the computer and monitored by an intelligent program during operation.

3. Soft stop curve:
When setting soft stop, the motor speed drops to a stop within the set time (Tr), and the slope descent curve can reduce the surge of water pump equipment.

Appearance and installation dimensions
1. CDJ1-S (soft start) appearance and installation dimensions

2. CDJ1-Z (device) appearance and installation dimensions

CDJ1 series motor soft starter

[soft starter]YDQ series liquid resistance starter

2026-6-17 14:42:58

Application scope:
The YDQ series liquid resistance starter (hereinafter referred to as the starter) is a new type of starter developed to improve the starting performance of large and medium-sized wound AC asynchronous motors. It overcomes the problems of high impact current, difficult starting, and inconvenient operation of frequency sensitive resistance starters, and is suitable for heavy-duty starting of motors such as ball mills, air compressors, crushers, large fans, and large water pumps in industrial sectors such as building materials, metallurgy, chemical industry, and mining. It is an ideal substitute for frequency sensitive starters and metal resistance starters.
This product adopts patented technology.

Model Description:

The meaning of auxiliary code:
W multi-point temperature measurement and sound and light alarm function
J equipped with automatic camera transfer function
K low-voltage motor primary circuit
Short circuit contactor with two contactors in parallel
B Short circuit contactor with vacuum contactor
PC adopts programmable controller
Each auxiliary code can be combined to complete the corresponding function.

Basic principle:
This starter gradually reduces the distance between two parallel plates in the conductive liquid through a mechanical transmission device until it reaches zero, causing the resistance value in the motor rotor circuit to gradually decrease smoothly from maximum to zero, and gradually smoothing the motor speed to reach the rated speed. Thus achieving smooth starting of heavy-duty wound large and medium-sized motors.
Technical performance characteristics:
1. The starting current is small and constant, with no impact on the power grid; The starting current should not exceed 1.3 times the rated current, thus reducing the requirement for transformer capacity during motor overload starting and minimizing one-time investment;
2. Smooth starting reduces the impact on mechanical equipment and can extend the lifespan of mechanical equipment and motors by about 30%;
3. Large heat capacity, can be started continuously 5-10 times;
4. Low voltage can still start, as long as the grid voltage can ensure the normal operation of the motor, smooth starting can be guaranteed;
5. The structure is simple, easy to maintain, and the reliability is superior to frequency sensitive and oil immersed variable resistors.

model	Applicable motor capacity (KW)	Start time (S)	Structural form and weight
YDQ5-0.2 series	Below 200	20~60	Integrated 200kg
YDQ5-0.4 series	Below 400	20~60	Integrated 350kg
YDQ5-0.6 series	Below 600	20~60	Integrated 450kg
YDQ3-0.6 series	Below 600	20~60	Split 600kg
YDQ5-1 series	Below 2000	20~60	Integrated 550kg
YDQ3-1 series	Below 2000	20~60	Split 700kg
YDQ5-2 series	Below 3000	20~60	Integrated 600kg
YDQ3-2 series	Below 3000	20~60	Split 750kg
YDQ5-3 series	Below 4000	20~60	Integrated 720kg
YDQ3-3 series	Below 4000	20~60	Split 840kg
YDQ5-4 series	Below 5000	20~60	Integrated 820kg
YDQ3-4 series	Below 5000	20~60	Split 970kg
YDQ5-6 series	Below 7000	20~60	Integrated 1050kg
YDQ3-6 series	Below 7000	20~60	Split 1200kg

Normal working conditions:
The upper limit of environmental temperature shall not exceed 50 ��, and the lower limit shall not be lower than -5 ��; Relative humidity not exceeding 85%; The altitude should not exceed 2000M; it should be placed indoors without severe vibration and impact, with a vertical inclination of no more than 5 °, and without fire or explosion hazards; No conductive dust or corrosive gases from Egypt are allowed; The power supply adopts three-phase four wire 380/220V 20A, and the voltage fluctuation must be ensured within ± 15% of the rated voltage.
Note: When the ambient temperature remains below 0 �� for a long time, a heater needs to be installed. Users should specify this when placing an order

Usage and maintenance:
1. There are two spare switches on the starter control cabinet panel:
Parking button: can be used for emergency parking on site;
Start button: can be used for on-site starting according to user needs.
2. Before starting the equipment, power must be supplied to the control cabinet, and it can only be started when the "allow start" signal light is on.
3. The electrolyte is usually replaced every 4-5 years, and the electrode plate and insulation box are cleaned at the same time. The electrode plate can be cleaned by first corroding the conductive surface with dilute hydrochloric acid and then rinsing with clean water. The insulation box can be cleaned by first rinsing with clean water and then drying, and then coated with epoxy resin several times (in general, it is best not to disassemble and clean, and vibration and impact should be avoided during disassembly to prevent the box from breaking).

Appearance and installation dimensions:
This starter is a cabinet structure, and the protection level can reach IP43 according to user requirements. According to different auxiliary functions, there are two types: integrated and split, and the structural form can be configured according to user requirements. The basic structural form and external dimensions of the split type are shown in Figure 2 and Table 2; The basic structural form and external dimensions of the integration are shown in Figure 3 and Table 3.

Table 2 YDQ3 Series Appearance and Installation Dimensions

model

Appearance of control cabinet

Size mm

Control cabinet installation

Size mm

Appearance of resistor cabinet

Size mm

Installation of resistance cabinet

Size mm

��

YDQ3-0.6 series

seven hundred

six hundred

two thousand

five hundred and fifty

four hundred and fifty

nine hundred

eight hundred

two thousand

seven hundred and fifty

seven hundred and ten

YDQ3-1 series

seven hundred

six hundred

two thousand

five hundred and fifty

four hundred and fifty

sixteen

one thousand

nine hundred

two thousand

eight hundred and fifty

eight hundred and ten

sixteen

YDQ3-2 series

seven hundred

six hundred

two thousand

five hundred and fifty

four hundred and fifty

one thousand

nine hundred

two thousand

eight hundred and fifty

eight hundred and ten

YDQ3-3 series

eight hundred

six hundred

two thousand

six hundred and fifty

four hundred and fifty

one thousand and two hundred

one thousand and one hundred

two thousand and two hundred

one thousand and fifty

one thousand and ten

Table 3 YDQ5- Series Appearance and Installation Dimensions

model	Dimensions mm			Installation size mm
model	A	B	C	E	F	��
YDQ5-0.2 series	seven hundred	seven hundred	one thousand and eight hundred	five hundred and fifty	six hundred and ten	sixteen
YDQ5-0.4 series	eight hundred	eight hundred	two thousand	six hundred and fifty	seven hundred and ten	sixteen
YDQ5-0.6 series	nine hundred	eight hundred	two thousand	seven hundred and fifty	seven hundred and ten	sixteen
YDQ5-1 series	one thousand	nine hundred	two thousand	eight hundred and fifty	eight hundred and ten	sixteen
YDQ5-2 series	one thousand and two hundred	one thousand and one hundred	two thousand	one thousand and fifty	one thousand and ten	sixteen
YDQ5-3 series	one thousand and four hundred	one thousand two hundred and sixty	two thousand and two hundred	one thousand two hundred and fifty	one thousand one hundred and twenty	sixteen
YDQ5-4 series	1500*	one thousand and five hundred	two thousand five hundred and fifty	1350*	one thousand and two hundred	sixteen
YDQ5-6 series	2600*	one thousand and five hundred	two thousand five hundred and fifty	2450*	one thousand and two hundred	sixteen

Note: 1. When selecting a vacuum circuit breaker for the rotor short-circuit contactor with * size, an additional 1100 must be added
2. The structure of the liquid resistance starter for larger capacity motors shall be designed and manufactured separately according to user requirements.

Installation Instructions
1. It is best to install the liquid resistance cabinet on a cement platform that can drain water;
2. The installation ground should be level, and the cabinet should be installed vertically and horizontally;
3. The resistance cabinet should be installed directly above the cable duct and equipped with a channel steel base (Figure 6);
4. The motor rotor cable is connected to the copper bar connected to the liquid resistor at the bottom of the short-circuit contactor on the back of the resistance cabinet through a cable trench (the copper bar is equipped with rotor wiring screws and nuts);
5. If equipped with an in camera, the rotor cable first goes to the in camera, and then connects to the resistor cabinet from the in camera;
6. The control power supply uses 3 × 2.5+1 × 1.5mm2 cables to connect A, B, C, and N on terminal block X1 to the starter. Connect the interlocking control lines between the liquid starter and the primary cabinet, DCS system, or other central control systems according to the drawing.
7. Install green and yellow grounding wires on the grounding pole.

YDQ series liquid resistance starter

[soft starter]QJR1 series motor soft starter

2026-6-17 14:42:50

1�� Scope of application
The QJR1 series 5.5-500kW motor soft starter uses a microcomputer as the core and an electronic high-power module as the actuator, suitable for motor control in various industries and working conditions without special requirements. This product was first tested and passed by the Home Low Hi Electrical Testing Center in 1998.
Due to the adoption of advanced design and manufacturing technology, it has the following advantages:
1. Compact structure and no noise;
2. Easy installation and operation;
3. Low starting current;
4. It has protection against phase failure, overload, short circuit, and overheating;
5. The price is extremely reasonable.

2�� Functional Features
1. Microcomputer fully automatic monitoring;
2. There is a dedicated secondary protection circuit with functions for phase failure, overload, and overheating protection;
3. High level automatic water supply, remote control microcomputer interface;
4. It can be freely stopped or soft stopped, and the soft stop time can be set;
5. The product has a novel structure, small size, reliable performance, and easy installation and operation;
6. Energy saving operation throughout the entire process.

3�� Working and environmental conditions
1. Power supply: three-phase 380V ± 10% 50Hz
2. Motor: three-phase AC asynchronous motor;
3. Starting frequency: less than 12 times per hour:
4. Environmental temperature:. 30 �� -55 ��:
5. Relative humidity: maximum 90% (temperature at 20 ��)

QJR1 series motor soft starter

[soft starter]QCR1 series AC motor soft starter

2026-6-17 14:42:41

The QCR1 series AC motor soft starter is suitable for AC 380V 50Hz, rated power from 11-400kW three-phase asynchronous motors for infrequent starting; For frequent starting or other special soft starters, please contact the manufacturer for customization.

The QCR1 series AC motor soft starter allows for 3 uniform starts per hour under normal load. If it is a light load start, it may be suitable to increase the number of starts, up to a maximum of 6 starts per hour.
Allow the starter to start twice in a row from a cold state, with each start time not exceeding 25 seconds and an interval of more than 30 seconds between each start. If the coil temperature rises too high after connecting the starter, it should be cooled to the ambient air temperature before starting again.

[soft starter]SR2 series AC motor soft starter

2026-6-17 14:42:33

Application scope of SR2 series AC motor soft starter:

The SR2 series AC motor soft starter is a product controlled by a microprocessor with 6 thyristors and an external bypass contactor to achieve soft start, soft stop, and protection functions for three-phase AC motors. This product is widely used in applications such as centrifuges, pumps, fans, compressors, and conveyors in the fields of petroleum, metallurgy, chemical engineering, construction, cement, mining, and environmental protection. It is the most ideal replacement product for traditional star/delta starters, reactor starters, autotransformer step-down starters, general soft starters, and other motor starting equipment. It successfully solves the problems of the impact of the large starting current formed during the starting of AC motors on the voltage of the power supply line and the impact on mechanical equipment during the starting or stopping of AC motors.

[soft starter]CR2 series intelligent motor soft starter

2026-6-15 13:36:00

The CR2 series intelligent motor soft starter is mainly suitable for controlling and protecting the starting, running, and stopping of squirrel cage motors. Because when the motor is directly started, the starting current can reach 7-10 times the rated current of the motor, which has a significant impact on the power grid and can affect the service life of mechanical equipment, even causing serious malfunctions and significant economic losses. The use of CR2 series intelligent motor soft starters can avoid these problems. In addition to the general functions of a regular soft starter, it also adds adjustable current function, intelligent monitoring and protection, communication function, etc., making the product more widely applicable to fields with high protection requirements and automation such as metallurgy, chemical industry, construction, mining, etc.
��1�� The CR2 series intelligent motor soft starter has a soft start function, which can reduce the starting current and torque of the motor, and minimize the torque impact generated during starting;
��2�� Equipped with soft parking function, it can gradually reduce the terminal voltage of the motor, avoiding damage to the equipment caused by sudden parking;
��3�� It has protection function, which can protect against overload, underload, peak overcurrent, process overcurrent, phase failure, three-phase imbalance, locked rotor, radiator overheating, reverse sequence, current limiting starting timeout and other faults, and has PTC direct thermal protection and hourly starting frequency protection;
��4�� It has programmable input and output functions, and can be set remotely/locally;
��5�� Equipped with adjustable current setting function, achieving the purpose of matching the rated current of the motor and providing precise protection;
��6�� Equipped with full Chinese LCD display function, it can display the main circuit current during operation and record 20 types of fault protection, and can set various parameters and protections;
��7�� Can be equipped with communication function to achieve remote monitoring, etc.

The CR2 series intelligent motor soft starter complies with IEC60947-4-2 and GB14048.6 standards and has obtained the national mandatory product certification "CCC" mark

Main Technical Parameters of CR2 Series Motor Soft Starter

model	Framework code	Rated current of soft starter Ie/A	Soft starter setting current Ir/A	Corresponding to Ie Controlled electric Rated power of the machine Pe/kW	Rated working voltage Ue	Rated impulse withstand voltage Uimp	Rated insulation voltage Ui	Rated control power supply voltage Us	polar number	Usage category
CR2-30	sixty-three	thirty	9~35	fifteen	communication 50Hz 400V	8kV	800V	Communication 50Hz 230V	Three poles	AC��53a
CR2-40		forty	12~46	eighteen point five
CR2-50		fifty	15~58	twenty-two
CR2-63		sixty-three	18~73	thirty
CR2-75	one hundred and five	seventy-five	22~87	thirty-seven
CR2-85		eighty-five	25~98	forty-five
CR2-105		one hundred and five	31~121	fifty-five
CR2-142	one hundred and seventy-five	one hundred and forty-two	40~164	seventy-five
CR2-175	one hundred and seventy-five	one hundred and seventy-five	50~202	ninety
CR2-200	three hundred	two hundred	60~230	one hundred and ten
CR2-250		two hundred and fifty	75~288	one hundred and thirty-two
CR2-300		three hundred	90~345	one hundred and sixty
CR2-340	five hundred and thirty	three hundred and forty	102~391	one hundred and eighty-five						AC��53b
CR2-370		three hundred and seventy	111~426	two hundred
CR2-400		four hundred	120~460	two hundred and twenty
CR2-450		four hundred and fifty	135~518	two hundred and fifty
CR2-500		five hundred	150~575	two hundred and eighty
CR2-530		five hundred and thirty	159~610	three hundred
CR2-570	seven hundred	five hundred and seventy	171~656	three hundred and fifteen
CR2-630		six hundred and thirty	189~725	three hundred and fifty-five
CR2-700		seven hundred	210~805	four hundred
CR2-800	nine hundred	eight hundred	240~920	four hundred and fifty
CR2-900	nine hundred	nine hundred	270~1035	five hundred

CR2 series intelligent motor soft starter

[soft starter]CR1 series motor soft starter

2026-6-15 13:35:12

The CR1 series motor soft starter (hereinafter referred to as the soft starter) is mainly suitable for controlling and protecting the starting, running, and stopping of squirrel cage motors. Because when the motor is directly started, the starting current can reach 7-10 times the rated current of the motor, which has a significant impact on the power grid and can affect the service life of mechanical equipment, even causing serious malfunctions and significant economic losses. The use of CR1 series soft starters can avoid these problems, and its performance has reached the advanced level of similar products internationally.
The CR1 series soft starter adopts single-chip microcomputer control technology, which controls the output voltage and reduces the starting current by detecting the current and power factor.
��1�� The CR1 series motor soft starter has a soft start function, which can reduce the starting current and torque of the motor, and minimize the torque impact generated during starting;
��2�� Equipped with soft parking function, it can gradually reduce the terminal voltage of the motor, avoiding damage to the equipment caused by sudden parking;
��3�� It has protection function and can protect against faults such as overload, three-phase imbalance, phase failure, peak overcurrent during starting, current limiting starting timeout, radiator overheating, etc.
Rated working current: 30A~900A;
Rated working voltage: 400V, 50Hz;
Soft start time, soft stop time, base voltage, trip level, and current limiting factor can be set;

The CR1 series motor soft starter complies with IEC60947-4-2 and GB14048.6 standards and has obtained the national mandatory product certification "CCC" mark.

2. Normal usage conditions
Ambient temperature
The upper limit is+40 ��, the lower limit is 0 ��, and the daily average temperature does not exceed+35 ��.
The temperature change in the working environment should not exceed 5 ��/h.
Relative humidity:
The relative humidity should not exceed 50% at+40 ��, and higher relative humidity is allowed at lower temperatures (such as 90% at 20 ��). The rate of change in relative humidity shall not exceed 5%/h, but condensation shall not occur.
class of pollution:
Environmental pollution level 3: There is conductive pollution, or dry non-conductive pollution becomes conductive pollution due to condensation.
Installation category:
The installation category of the main circuit of the soft starter is III; The installation category for auxiliary circuits and control circuits that are not connected to the main circuit is II.
altitude
The altitude of the installation site shall not exceed 2000m.
Vibration:
The vibration conditions that the soft starter can withstand are: vibration frequency of 10Hz~150Hz, vibration acceleration not exceeding 5m/s2.
environment
The soft starter should be installed in a location that is free from explosion hazards, conductive dust, corrosive metals, and insulation damage.
Electromagnetic environment:
Soft starter is suitable for electromagnetic environment A.

Main Technical Parameters of CR1 Series Motor Soft Starter

model	Shell frame code name	Soft starter rated current Ie/A	Controlled electric Rated power of the machine Pe/kW	Rated work Make voltage Ue/V	Rated impact Withstand voltage Uimp/V	Rated Absolute Edge voltage Ui/V	Rated control power supply voltage Us/V	use category
CR1-30	sixty-three	thirty	fifteen	communication 50Hz four hundred	eight thousand	six hundred and ninety	Communication 50Hz two hundred and thirty	AC-53a
CR1-40		forty	eighteen point five
CR1-50		fifty	twenty-two
CR1-63		sixty-three	thirty
CR1-75	one hundred and five	seventy-five	thirty-seven
CR1-85		eighty-five	forty-five
CR1-105		one hundred and five	fifty-five
CR1-142	one hundred and seventy-five	one hundred and forty-two	seventy-five
CR1-175	one hundred and seventy-five	one hundred and seventy-five	ninety
CR1-200	three hundred	two hundred	one hundred and ten
CR1-250		two hundred and fifty	one hundred and thirty-two
CR1-300		three hundred	one hundred and sixty
CR1-340	five hundred and thirty	three hundred and forty	one hundred and eighty-five					AC-53b
CR1-370		three hundred and seventy	two hundred
CR1-400		four hundred	two hundred and twenty
CR1-450		four hundred and fifty	two hundred and fifty
CR1-500		five hundred	two hundred and eighty
CR1-530		five hundred and thirty	three hundred
CR1-570	seven hundred	five hundred and seventy	three hundred and fifteen
CR1-630		six hundred and thirty	three hundred and fifty-five
CR1-700		seven hundred	four hundred
CR1-800	nine hundred	eight hundred	four hundred and fifty
CR1-900	nine hundred	nine hundred	five hundred