Shanghai Huabang Industrial Business Network - Absolute encoder

[Absolute encoder]OGR8G-2 Encoder

2026-6-11 10:49:14

OGR8G-2 encoder

[Absolute encoder]STE10 bit absolute encoder

2026-6-11 10:49:05

Introduction to STE10 bit absolute encoder:

Output as Gray code with no reading error.
Metal casing, dust-proof and drip proof construction.
High performance design that values ease of use.

STE10 bit absolute encoder

[Absolute encoder]JZB-32768 Contact type multi turn absolute encoder

2026-6-11 10:48:56

Technical specifications of JZB-32768 contact type multi turn absolute encoder:

1. Model: JZB-32768
2. Measurement range: 0-32767
3. Resolution per cycle: 1/512
4. Continuous turns: 64 turns
5. Contact voltage withstand: DC5-30V
6. Current consumption: �� 20mA (in case of serial signal); No current consumption (in parallel signal)
7. Output form: When using parallel signals: O-open collector negative logic output P-open collector positive logic output E-voltage output positive logic (high level is "1") F-voltage output negative logic (high level is "0") Other - (Note: Conventional products use open collector negative logic output)
8. Output methods: aviation plug out (side out), lead out (side out)
9. Maximum response frequency: 10KHz
10. Operating environment temperature: -40 �� to+85 ��
11. Storage environment temperature: -55 ��~+110 ��
12. Protection level: IP63
13. Starting torque:<4Ncm
14. Allowable load on the shaft: 50N radially and 40N axially

[Absolute encoder]JZB-8192 Contact type multi turn absolute encoder

2026-6-11 10:48:48

Technical specifications of JZB-8192 contact type multi turn absolute encoder:

1. Model: JZB-8192
2. Measurement range: 0-8191
3. Resolution per cycle: 1/128
4. Continuous turns: 64 turns
5. Contact voltage withstand: DC5-30V
6. Current consumption: �� 20mA (in case of serial signal); No current consumption (in parallel signal)
7. Output form: When using parallel signals: O-open collector negative logic output P-open collector positive logic output E-voltage output positive logic (high level is "1") F-voltage output negative logic (high level is "0") Other - (Note: Conventional products use open collector negative logic output)
8. Output methods: aviation plug out (side out), lead out (side out)
9. Maximum response frequency: 10KHz
10. Operating environment temperature: -40 �� to+85 ��
11. Storage environment temperature: -55 ��~+110 ��
12. Protection level: IP63
13. Starting torque:<4Ncm
14. Allowable load on the shaft: 50N radially and 40N axially

[Absolute encoder]JZB-1024 Contact type single coil absolute encoder

2026-6-11 10:48:39

Technical specifications of JZB-1024 contact type single coil absolute encoder:

1. Model: JZB-1024
2. Measurement range: 0-1023
3. Resolution per cycle: 1/1024
4. Contact voltage withstand: DC5-30V
5. Current consumption: �� 20mA (in case of serial signal); No current consumption (in parallel signal)
6. Output form: When using parallel signals: O-open collector negative logic output P-open collector positive logic output E-voltage output positive logic (high level is "1") F-voltage output negative logic (high level is "0") Other - (Note: Conventional products use open collector negative logic output)
7. Output methods: aviation plug out (side out), lead out (side out)
8. Maximum response frequency: 10KHz
9. Operating environment temperature: -40 �� to+85 ��
10. Storage environment temperature: -55 ��~+110 ��
11. Protection level: IP63
12. Starting torque:<2.5Ncm
13. Allowable load on the shaft: 50N radially and 40N axially

[Absolute encoder]JZB-65536 Contact type multi turn absolute encoder

2026-6-11 10:48:30

Technical specifications of JZB-65536 contact type multi turn absolute encoder:

1. Model: JZB-65536
2. Measurement range: 0-65535
3. Resolution per cycle: 1/1024
4. Continuous turns: 64 turns
5. Contact voltage withstand: DC5-30V
6. Current consumption: �� 20mA (in case of serial signal); No current consumption (in parallel signal)
7. Output form: When using parallel signals: O-open collector negative logic output P-open collector positive logic output E-voltage output positive logic (high level is "1") F-voltage output negative logic (high level is "0") Other - (Note: Conventional products use open collector negative logic output)
8. Output methods: aviation plug out (side out), lead out (side out)
9. Maximum response frequency: 10KHz
10. Operating environment temperature: -40 �� to+85 ��
11. Storage environment temperature: -55 ��~+110 ��
12. Protection level: IP63
13. Starting torque:<4Ncm
14. Allowable load on the shaft: 50N radially and 40N axially

[Absolute encoder]JZB-16384 Contact type multi turn absolute encoder

2026-6-11 10:48:21

JZB-16384 contact type multi turn absolute encoder

1. Output signal: A-4-20mA standard analog quantity B parallel Gray code output C serial RS485 serial communication interface (positive sky protocol) M serial RS485 serial communication interface (ModBus protocol) S SSI synchronous serial signal interface
2. Outer diameter (number of main body diameters: �� 64, �� 79) or made according to user requirements
3. Aluminum alloy shell, special surface treatment

Technical specifications of JZB-16384 contact type multi turn absolute encoder:
1. Model: JZB-16384
2. Measurement range: 0-16383
3. Resolution per cycle: 1/256
4. Continuous turns: 64 turns
5. Contact voltage withstand: DC5-30V
6. Current consumption: �� 20mA (in case of serial signal); No current consumption (in parallel signal)
7. Output form: When using parallel signals: O-open collector negative logic output P-open collector positive logic output E-voltage output positive logic (high level is "1") F-voltage output negative logic (high level is "0") Other - (Note: Conventional products use open collector negative logic output)
8. Output methods: aviation plug out (side out), lead out (side out)
9. Maximum response frequency: 10KHz
10. Operating environment temperature: -40 �� to+85 ��
11. Storage environment temperature: -55 ��~+110 ��
12. Protection level: IP63
13. Starting torque:<4Ncm
14. Allowable load on the shaft: 50N radially and 40N axially

[Absolute encoder]JZB-4096 Contact type multi turn absolute encoder

2026-6-11 10:48:12

Characteristics of JZB-4096 contact type multi turn absolute encoder:
1. Output signal: A-4-20mA standard analog quantity B parallel Gray code output C serial RS485 serial communication interface (positive sky protocol) M serial RS485 serial communication interface (ModBus protocol) S SSI synchronous serial signal interface
2. Outer diameter (number of main body diameters: �� 64, �� 79) or made according to user requirements
3. Aluminum alloy shell, special surface treatment

Technical specifications of JZB-4096 contact type multi turn absolute encoder:
1. Model: JZB-4096
2. Measurement range: 0-4095
3. Resolution per cycle: 1/64
4. Continuous turns: 64 turns
5. Contact voltage withstand: DC5-30V
6. Current consumption: �� 20mA (in case of serial signal); No current consumption (in parallel signal)
7. Output form: When using parallel signals: O-collector open circuit negative logic output? P-collector open circuit positive logic output E-voltage output positive logic (high level is "1") F-voltage output negative logic (high level is "0") Other - (Note: Conventional products have collector open circuit negative logic output)
8. Output methods: aviation plug out (side out), lead out (side out)
9. Maximum response frequency: 10KHz
10. Operating environment temperature: -40 �� to+85 ��
11. Storage environment temperature: -55 ��~+110 ��
12. Protection level: IP63
13. Starting torque:<4Ncm
14. Allowable load on the shaft: 50N radially and 40N axially

[Absolute encoder]JZB-512 Contact type single coil absolute encoder

2026-6-11 10:48:03

Technical specifications of JZB-512 contact type single coil absolute encoder:

1. Model: JZB-512
2. Measurement range: 0-511
3. Resolution per cycle: 1/512
4. Contact voltage withstand: DC5-30V
5. Current consumption: �� 20mA (in case of serial signal); No current consumption (in parallel signal)
6. Output form: When using parallel signals: O-open collector negative logic output P-open collector positive logic output E-voltage output positive logic (high level is "1") F-voltage output negative logic (high level is "0") Other - (Note: Conventional products use open collector negative logic output)
7. Output methods: aviation plug out (side out), lead out (side out)
8. Maximum response frequency: 10KHz
9. Operating environment temperature: -40 �� to+85 ��
10. Storage environment temperature: -55 ��~+110 ��
11. Protection level: IP63
12. Starting torque:<2.5Ncm
13. Allowable load on the shaft: 50N radially and 40N axially