HV-10 type low load Vickers hardness testerDetailed product description：

The HV-10 low load Vickers hardness tester is a new type of Vickers hardness tester that uses precision mechanical technology and optoelectronic technology.

The machine is controlled by a microcomputer and can adjust the strength of the measuring light source through soft keys. It can also test the force holding time and display it in LEG. This machine adopts a unique measurement conversion and micrometer eyepiece one-time measurement reading mechanism, which is easy to use and has high measurement accuracy.

The HV-10 low load Vickers hardness tester is equipped with an optional photography device, which can take pictures of the measured indentation and material metallographic structure. It is suitable for measuring small, thin specimens, and parts after surface plating treatment. It is an ideal hardness testing instrument for research institutions, factories, and quality inspection departments to conduct research and testing.

Test force: 2.94N (0.3Kgf), 4.9N (0.5Kgf), 9.80N (1Kgf), 29.4N (3Kgf), 49.0N (5Kgf), 98.0N (10Kgf)
Hardness symbols: HV1, HV5, HV10, HV20, HV30, HV50
Allowable deviation of indication: ± 3.0%
Test force application method: automatic addition of test force
Magnification of measuring microscope: 200x (for measuring) 100x (for observation)
Test force holding time: 5-60s (range in 5 seconds)
Minimum detection unit: 0.5 μ m
Maximum height of specimen: 160mm
Maximum distance from the center of the pressure head to the machine wall: 135mm
Host weight: approximately 40kg
Power supply: AC220V/50HZ
Dimensions (length x width x height): (540 x 220 x 650) mm
Hardness value range: 5HV-2500HV