WSSB explosion-proof bimetallic thermometerDetailed product description：

WSSB explosion-proof bimetallic thermometer features:

Mercury free, easy to read, sturdy and shock resistant.
The protective pipe material is 1Gr18Ni9Ti stainless steel and molybdenum titanium, with strong pressure resistance and anti-corrosion ability.
The core pulling thermometer can be maintained or replaced for a short period of time without stopping the machine.
There are complete varieties of axial, radial, 135 º, universal and other types, which are suitable for various on-site installation needs.

Usage and maintenance:
During the storage, installation, use, and transportation of WSS series bimetallic thermometers, it is advisable to avoid collisions with protective tubes and avoid using them Bending and deformation of the protective tube. During installation, it is strictly prohibited to twist the instrument housing.
2. The instrument should operate normally within an ambient temperature range of -30 ℃ to 80 ℃.
3. The temperature at which the instrument frequently operates should ideally be between 1/2 and 3/4 of the scale range.

Main technical parameters of WSSB explosion-proof bimetallic thermometer:
The temperature measurement range, accuracy level, division value, protective tube diameter, and minimum insertion depth of WSS thermometer are shown in the table below.

Temperature measurement range	accuracy class	Dividing value ℃	Minimum insertion depth Lmin (mm)
			Φ6	Φ8	Φ10
-40℃～80℃	one point five	two	forty-five	fifty-five	sixty
0℃～50℃	one point five	one	one hundred and ten	one hundred and thirty	one hundred and forty
0℃～100℃	one point five	two	fifty-five	sixty-five	seventy
0℃～150℃	one point five	two	forty	forty-five	fifty
0℃～200℃	one point five	five	thirty	thirty-five	forty
0℃～300℃	one point five	five	fifty	sixty	sixty
0℃～400℃	one point five	ten	forty	fifty	fifty
0℃～500℃	one point five	ten	thirty-five	forty	forty
0℃～600℃	one point five	ten	thirty	thirty-five	thirty-five
Customizable	one	*	*	*	*

Note:
1. The insertion depth L of the thermometer must be greater than Lmin. The available series for L are: 100150200250300400500750,
100012501502000, etc., can also be customized according to user needs.
2. The time constant of this series of thermometers with protective tube diameters of Φ 6 and Φ 8 shall not exceed 40 seconds, and for a diameter of Φ 10, the time constant shall not exceed 30 seconds.
3. The protective tube is made of stainless steel 1Cr18Ni9Ti, with a maximum working pressure of 6.4MPa at room temperature