GW-CGQ type vibration temperature sensorDetailed product description：

1、 Introduction
The GW-CGQ vibration temperature sensor is equipped with a built-in vibration sensor and a temperature sensor, which can measure vibration and temperature in two perpendicular directions. It is fixed with four screws and does not require power supply. It can directly output signals to instruments or transmitters, is easy to install, and should not be damaged. It has been widely used in the industrial field.

2、 Technical parameters of GW-CGQ vibration temperature sensor
1. Vibration parameters:
Sensitivity (optional):
a. 50mv/mms
b. 30mv/mms
c. 20mv/mms
Frequency response (optional):
a. 5～100 Hz
b. 10～500 Hz
c. 10～1000 Hz
Natural frequency: 10Hz
Measurable amplitude: ≤ 2000 μ m (P-P)
Maximum acceleration: 10g
Measurement direction: vertical or horizontal
2. Temperature range: -50 ℃ to 150 ℃ or as per your needs, the temperature range can be determined
3. Installation
Installation position: Installed vertically or horizontally on the measured vibration point, measuring motion in the X-axis and Y-axis directions, and can also measure vibration in the up and down, left and right, front and rear directions according to one's own needs
4. Selection of GW-CGQ Vibration Temperature Sensor

GW-CGQ A. Two directions (X-axis and Y-axis movement)
B. Three directions (X, Y, Z-axis movement)