CA100 Multi functional process calibratorDetailed product description：

Technical specifications of CA100 multifunctional process calibrator

Functional specifications occur
DC voltage occurs, DC current occurs, and resistance occurs

function	scope	Accuracy guarantee range	resolution	display range	Precision ±（%of setting+%of range）		Temperature coefficient * 1 ±（%of setting+%of range）/℃		Remark
					%of setting	%of range	%of setting/℃	%of range/℃
DC voltage occurrence	100mV	0～100.000mV	1μV	-10～110.000mV	zero point zero two	zero point zero one	zero point zero zero three	zero point zero zero two	Output resistance: approximately 6.5 Ω
	1V	0～1.00000V	10μV	-0.1～1.10000V	zero point zero two	zero point zero zero five	zero point zero zero two	zero point zero zero one	Maximum output: 10mA Output resistance: approximately 30m Ω
	10V	0～10.0000V	100μV	-1～11.0000V	zero point zero two	zero point zero zero five	zero point zero zero two	zero point zero zero one	Maximum output: 10mA Output resistance: approximately 30m Ω
DC voltage occurrence	20mA	0～20.000mA	1μA	0～22.000mA	zero point zero two five	zero point zero one five	zero point zero zero three	zero point zero zero three	Maximum output: 24V
	-20mA*2	0～-20.000mA	1μA	0～-22.000mA	zero point zero two five	zero point zero three	zero point zero zero three	zero point zero zero three	Maximum output: 28V
Resistance occurrence * 3	500Ω	0～500.00Ω	10mΩ	0～550.00Ω	0.02*4	0.02*4	zero point zero zero two	zero point zero one	*45
	5kΩ	0～5.0000kΩ	100mΩ	0～5.5000Ω	0.05*4	0.03*4	zero point zero zero two	zero point zero one	*46
	50kΩ	0～50.000kΩ	1Ω	0～55.000Ω	0.1*4	0.1*4	zero point zero zero two	zero point zero three	*47

The temperature conditions for the temperature coefficient are: 5 ℃ to 18 ℃ and 28 ℃ to 40 ℃.
DC-mA suction: The function of drawing a specified current value in the positive direction from an external voltage source.
Resistance occurrence: Similar to the equivalent resistance occurrence method, its specifications are only valid within the range of measured current and output voltage in the remarks column.
Excluding the accessory wire resistance part.
Measure current of 1mA to 5mA and output voltage below 2V.
Measure current of 0.1mA to 1mA and output voltage below 2V.
Measure current ranging from 0.01mA to 0.1mA and output voltage below 2V.

Frequency occurrence, pulse occurrence

function	scope (Accuracy guarantee range 0)	display resolution	Display range of occurrence	Precision	maximum output	Remark
Frequency occurrence	1～100Hz	100.0Hz	1～110Hz	±1digits	10mA	Waveform: Rectangular wave with approximately 50% duty Output level: 0-10V Output level accuracy: ± 10%
	100～1000Hz	1000 Hz	90～1100Hz
	1～10kHz	10.0k Hz	0.9～11.0kHz
	10～50kHz	50k Hz	9～50kHz
Pulse occurrence * 8	1～100Hz	60,000cycles	1～60000cycles	±1digits	10mA
	100～1000Hz
	1～10kHz
	10～50kHz

Thermocouple potential occurrence

scope	Temperature range of occurrence ℃	Resolution ℃	Accuracy ℃	Temperature coefficient * 9 (℃/℃)
K	-200.0～-100.0	zero point one	zero point six	zero point zero five
	-100.0～400.0	zero point one	zero point five	zero point zero five
	400.0～1200.0	zero point one	zero point seven	zero point zero five
	1200.0～1372.0	zero point one	zero point nine	zero point zero five
E	-250.0～-200.0	zero point one	one point two	zero point one
	-200.0～-100.0	zero point one	zero point six	zero point zero five
	-100.0～600.0	zero point one	zero point five	zero point zero five
	600.0～-1000.0	zero point one	zero point six	zero point zero five
J	-210.0～-100.0	zero point one	zero point six	zero point zero five
	-100.0～-800.0	zero point one	zero point five	zero point zero five
	800.0～1200.0	zero point one	zero point seven	zero point zero five
T	-250.0～-200.0	zero point one	one point five	zero point two
	-200.0～400.0	zero point one	zero point five	zero point zero five
N	-200.0～-100.0	zero point one	one	zero point one
	-100.0～900.0	zero point one	zero point seven	zero point zero five
	900.0～1300.0	zero point one	zero point eight	zero point zero five
B	400~600	one	two	zero point two
	600~800	one	one point five	zero point two
	800~1820	one	one point one	zero point two
R	-40～100	one	one point five	zero point two
	100~1767	one	one point two	zero point two
S	-40～100	one	one point five	zero point two
	100~1767	one	one point five	zero point two

Temperature conditions for temperature coefficient: 5 ℃ to 18 ℃ and 28 ℃ to 40 ℃
This specification complies with IEC 584-1-1989 and IEC 584-1-1995
The internal resistance of the thermocouple output is approximately 6.5 Ω
The accuracy does not include RJC accuracy, and standard contact compensation is performed using RJC sensors sold separately.
When using standard contact temperature for output compensation, RJC accuracy should be added.
Output compensation is performed approximately every 10 seconds
RJC sensor specifications:
Measurement range: -10~50C
Accuracy: 18-28 ℃: ± 0.5 ℃ (combined with the main body)
-10-18 ℃, 28-50 ℃: ± 1 ℃ (combined with the main body)
Wire length: approximately 1.5m
Temperature unit: ℃, F

Thermal resistance output occurs:

scope	Temperature range of occurrence ℃	Resolution ℃	Accuracy * 10 ℃	Temperature coefficient * 11 ℃
PT100	-200.0～0	zero point one	zero point three	zero point zero four
	0～400.0	zero point one	zero point five	zero point zero four
	400.0～850.0	zero point one	zero point eight	zero point zero four

The accuracy is calculated based on the measured current of 1-5mA, excluding the auxiliary wire resistance part.
The temperature conditions for the temperature coefficient are: 5 ℃ to 18 ℃ and 28 ℃ to 40 ℃.
This specification complies with IEC 751-1983 and IEC 751-1995

General specifications for signal generation function
The output of the thermistor adopts the equivalent resistance generation method.
Response time of the department:
DC voltage occurrence, within the range of 1V or 10V, 10ms (time from output change to entering accuracy)
Resistance occurrence, 500 Ω range (including thermal resistance output): 10ms (the time from the specified power supply to the output entering the accuracy range)
Functions occurring outside the above range: 300ms
Maximum load capacity: 0.01 μ F (occurrence of DC voltage, resistance, thermal resistance EMF, RTD frequency, and pulse)
Minimum load capacity: 100 μ F (DC current generated)
Voltage limiter of the generator: operates when the load is above 28.5V (manual reset)
Current limiter of the generator: Load action above 12mA (limited to DC voltage, frequency, pulse occurrence, manual reset)
Temperature unit: ℃, F

General specifications for signal generation function
Output=set value x n/m
When m=integer (1 15); N=integer (1 m)

24V DC power supply function
Output voltage: 24 ± 1V
Maximum output current: 22mA
Output protection, output stops at maximum 30mA

Measurement function specifications

function	scope	Accuracy guarantee range	resolution	display range	Precision ±（%of reading+%of range）		Temperature coefficient * 1 ±（%of reading+%of range）/℃		Remark
					%of reading	%of range	(%of setting)/℃	(%of range)/℃
DC voltage occurrence	500mV	-500.00～500.00mV	10μV	-599.99～599.99mV	zero point zero two	zero point zero one	zero point zero zero two	zero point zero zero one	Input resistance: 1G Ω or above
	5V	-5.0000～5.0000V	100μV	-5.9999～5.9999V	zero point zero two	zero point zero one	zero point zero zero two	zero point zero zero one	Input resistance: approximately 1m Ω
	35V	-35.000～35.000V	1mV	-41.999～41.999V	zero point zero two	zero point zero one five	zero point zero zero two	zero point zero zero one
DC voltage occurrence	20mA	-20.000～20.00mA	1μA	-23.999～23.999mA	zero point zero two five	zero point zero two	zero point zero zero two	zero point zero zero one	Input resistance: below 20 Ω
	100mA	-100.00～100.00mA	10μA	-119.99～119.99mA	zero point zero four	zero point zero three	zero point zero zero two	zero point zero zero one
Resistance occurrence * 3	500Ω	0～500.00Ω	10mΩ	0～599.99Ω	0.055*13	0.015*13	zero point zero zero five	zero point zero two	Measurement current: approximately 1mA
	5kΩ	0～5.0000kΩ	100mΩ	0～5.9999Ω	0.055*13	0.015*13	zero point zero zero five	zero point zero two	Measurement current: approximately 100 μ A
	50kΩ	0～50.000kΩ	1Ω	0～59.999Ω	0.55*13	0.02*13	zero point zero zero five	zero point zero two	Measurement current: approximately 10 μ A

The temperature conditions for the temperature coefficient are: 5 ℃ to 18 ℃ and 28 ℃ to 40 ℃.
Resistance without accessory wires