Stainless steel gear pumpDetailed product description：

Overview
KCB stainless steel gear pump is mainly used for conveying lubricating oil in lubrication systems of various mechanical equipment, suitable for conveying lubricating oil with viscosity of 5 × 10-6~1.5 × 10-3m2/s (5-1500cSt) and temperature below 300 ℃. Stainless steel gear pump can transport non lubricating oil, beverages, and low corrosive liquids. Equipped with copper gears, it can transport low internal point liquids such as gasoline, benzene, etc. In addition to regular motors, this series of pumps can also be equipped with explosion-proof motors of the same specifications according to user needs. Material: 304.316.316L stainless steel

Use
Can be used as a transmission and booster pump in oil transportation systems;
A fuel pump that can be used for delivery, pressurization, and injection in the fuel system;
It can be used as a lubricating oil pump in all industrial fields.

Scope of Application
This series of gear pumps mainly consists of gears, shafts, pump bodies, safety valves, and shaft end seals. Gears have high hardness and strength after heat treatment, and are installed together with the shaft in a replaceable shaft sleeve for operation. The lubrication of all parts inside the pump is automatically achieved through the use of the output medium during pump operation.
There are well-designed oil discharge and return grooves inside the pump, which minimize the torque force that the gears bear during operation, resulting in low bearing load, minimal wear, and high pump efficiency.
The pump is equipped with a safety valve as overload protection, and the full reflux pressure of the safety valve is 1.5 times the rated discharge pressure of the pump. It can also be adjusted according to actual needs within the allowable discharge pressure range. However, please note that this safety valve cannot be used for long-term operation as a pressure reducing valve. If necessary, it can be installed separately on the pipeline.
When viewed from the extended end of the main shaft towards the pump, it rotates clockwise.
High flow gear oil pump, gear pump, oil transfer pump, crude oil pump, marine gear pump, etc.
Flow rate: 1.1m3/h-600m3/h Pressure: 0.28MPa-2.5MPa
Mainly used for high flow oil transportation and unloading in oil fields, oil depots, ports, docks, ships, etc!

Performance Parameter Table

model	Traffic Q		Speed n r/min	Discharge pressure p Mpa	Necessary gas Corrosion allowance r m	efficiency η %	electric motor
	m3/h	L/min					Power KW	model
KCB-18.3	one point one	eighteen point three	one thousand and four hundred	one point four five	five	forty-four	one point five	Y90L-4
2CY-1.1/1.45
KCB-33.3	two	thirty-three point three	one thousand four hundred and twenty	one point four five	five	forty-four	two point two	Y100L1-4
2CY-2/1.45
KCB-55	three point three	fifty-five	one thousand and four hundred	zero point three three	seven	forty-one	one point five	Y90L-4
2CY-3.3/0.33
KCB-83.3	five	eighty-three point three	one thousand four hundred and twenty	zero point three three	seven	forty-three	two point two	Y100L1-4