BCD54-100 Explosion proof plug-in deviceDetailed product description：

BCD54-100 Explosion proof Plug in Device Model Meaning

Scope of Application
Altitude not exceeding 2000m
The ambient temperature should not exceed+40 ℃ and should not be lower than -20 ℃
The relative humidity of the surrounding environment is not greater than 95% (equivalent to+25 ℃)
Suitable for Class IIA and IIB T1 to T4 explosive gas mixtures (Zone 1 and Zone 2) locations
Has a slightly corrosive environment, but does not contain gases that severely damage metals and insulation
Places that can prevent the infiltration of hydrated liquids
Suitable for long-term work system

Characteristics of BCD54-100 Explosion proof Plug in Device
Suitable for circuits with rated voltage below 380V and rated current of 63,80100125A. This plug consists of two parts: a plug and a socket. The housing is made of high-strength cast aluminum alloy, and the plug and socket are made of arc resistant plastic pressure molded. The plug and socket are made of arc resistant plastic pressure molded, and the surface is sprayed with plastic. The cast aluminum alloy housing is equipped with a mm1 plastic shell circuit breaker switch, which has short-circuit overload protection function. The switch can only be opened and closed by rotating the operating mechanism at the beginning. The switch can only be in the "ON" and "OFF" positions. The plug and switch have interlocking devices, and the switch can be pulled out by rotating the cylinder to the open position. Do not twist the cylinder at will, and do not open the external device with power on! Warning signs. Wire wiring and cable clamp sealing connectors.

Main technical parameters

model	Current (A)	Voltage (V)	polar number	Explosion-proof marking	Protection Rating	Inlet thread (G ")	Cable outer diameter (diameter, mm)
BCD54-100	sixty-three	three hundred and eighty	3P+N+PE	ExdⅡBT4	IP54	two	18~25

Installation dimensions of BCD54-100 explosion-proof plug device