EX80 series plug-in electromagnetic flowmeterDetailed product description：

EX81, EX82, EX83 plug-in electromagnetic flow meters can fix depth, plug-in electromagnetic flow meters

Low flow rate, better accuracy than any mechanical flow sensor
No moving parts, no wear and tear
Special connector, easy to install
The positioning clip automatically fixes the correct insertion depth
Insertion depth only requires 1/8 of the pipe diameter, minimizing the obstruction of fragments to the greatest extent possible
Simple pulse sequence output, suitable for most signal processing modules or directly sent to PLC
Can be used for 316 stainless steel or PVC pipes with a diameter of 25-300mm

Introduction to EX80 series plug-in electromagnetic flowmeter
Used for conductive liquids, suitable for pipe diameters of 25-100mm. EX82 is suitable for pipe diameters of 150-250mm. E83 plug-in stainless steel electromagnetic flowmeter, suitable for 300mm pipe diameter. Due to the absence of moving parts, plug-in electromagnetic flow meters are highly suitable for corrosive environments and difficult applications, such as those involving viscous changes and pulsating flow. The plug-in electromagnetic flowmeter is particularly recommended for measuring the flow rate of pneumatic diaphragm pumps.

The EX80 series plug-in electromagnetic flowmeter adopts modular and universal design, with current pulse output, which can be combined with appropriate transmitters or indicators according to the application situation. When 4-20mA analog output is required to display flow rate and total flow rate, FT420 (with pulse and 4-20mA output) can be used. As long as the 4-20mA analog output is available, A055 (no display, 4-20mA converter) can be directly installed on the flowmeter. If the EX80 series plug-in electromagnetic flowmeter is used together with a programmable controller, the output signal can be directly fed without any other conditions.  

The EX80 series plug-in electromagnetic flowmeter requires specialized installation accessories because it is not depth adjustable like the EX100/200 series. Specialized installation accessories ensure correct depth positioning within the pipe.

Technical parameters of EX80 series plug-in electromagnetic flowmeter

Precision	1% full scale
signal output	Square wave pulse output, optoelectronic isolation, 500Hz, at 6m/s
bidirectional output	Forward/reverse output, optoelectronic isolation
Air traffic control inspection	The default flow rate is zero
Flow rate range	0.06-6.09 m/s
Maximum pipe pressure	200PSI（13.8bar）
maximum temperature	PVC: 55 ℃, stainless steel: 93 ℃
Minimum conductivity	20 mS/cm
Power supply	12-24VDC，250mA
material	Mechanical: 316 stainless steel/PVC Electrode: Hastelloy nickel based alloy Electrode plate: PVDF Shell: cast aluminum, powder coating O-ring: EPDM
Size	10.2cm square, total length 15.2-17.8cm, 907g

Standard Configuration
BM0000EX81P fixed depth insertion electromagnetic flowmeter, PVC， Used for pipe diameters of 1-4 inches, user manual
BM0500EX81S Fixed Depth Insertion Electromagnetic Flow Meter, Stainless Steel, Used for 1-4 inch Pipe Diameter, User Manual
BM0100EX82P fixed depth insertion electromagnetic flowmeter, PVC， Used for 6-10 inch pipe diameter, user manual
BM0150EX82S Fixed Depth Insertion Electromagnetic Flow Meter, Stainless Steel, Used for 6-10 inch Pipe Diameter, User Manual
BM0800EX83S Fixed Depth Insertion Electromagnetic Flow Meter, Stainless Steel, for 12 inch Pipe Diameter, User Manual

Specialized accessories
***Special installation accessories such as T-joints and saddle joints, please inquire
Accessory Selection
BM0200FT420M pulse and 4-20mA output display, header installation, including 5.5-meter cable, user manual
BM0210FT420W pulse and 4-20mA output display, wall mounted, including 5.5-meter cable, user manual
BM0250AO55M no display 4-20mA converter, header installation, including 5.5-meter cable, user manual
BM0260AO55W non display 4-20mA converter, wall mounted, including 5.5-meter cable, user manual