SYP1002B-II Closed flash point testerDetailed product description：

Product Description: How to Translate

The SYP1002B-II closed flash point tester is suitable for determining the flash point of flammable liquids, liquids with suspended particles, liquids that tend to form a film on the surface under test conditions, and other liquids using the Binsky Martin closed cup method according to GB/T 261 "Determination of Flash Point". It is suitable for samples with a flash point higher than 40 ℃. Complies with the requirements of standards such as GB/T261, ISO2719, ASTM D93, IP34 for instruments.

Performance characteristics:

1. Semi automatic ignition, whose ignition action is completed by the mechanical transmission system
2. It has two mixing speeds, 100 ± 10 revolutions per minute and 250 ± 10 revolutions per minute, which can be switched by oneself
3. Control the heating power through voltage adjustment, with a voltage setting range of 0~220V
4. Use keyboard to input the required voltage, numerical settings, and a three and a half digit LCD display
5 . Equipped with mains power compensation function (not affected by external voltage changes)
6. The instrument integrates a gas pipe rack, which can use various gases such as coal gas, butane gas, liquefied gas, etc. for ignition
7. The size of the test flame ball can be adjusted through a gas flow control valve
8. The electric furnace has a cooling device, which can shorten the continuous use time and wait for the cooling time in between

Technical parameters of SYP1002B-II closed flash point tester:

1. Hoop type electric heater: 500W
2. Mixing motor: variable speed, 100 rpm and 250 rpm, accuracy: ± 10 rpm
3. Ignition motor: AC motor, 24 revolutions per minute
4. Cooling rate: 12-14 ℃/min
5. Standard oil cup:
Inner diameter 50.8mm
Depth 56mm
The depth of the oil testing capacity marking line is 34.2mm
Oil testing capacity is about 70ml
6 ignition sources: butane, coal gas or liquefied gas
7 Igniter aperture: 0.7mmv