BSY-133A Lubricating oil rust prevention performance testerDetailed product description：

Product Description: How to Translate
The BSY-133A lubricant rust prevention performance tester is produced with advanced Japanese technology and complies with GB/T11143 and ASTM D665 standards. It consists of intelligent temperature control instruments, constant temperature rotor drive devices, and test piece grinding devices. The instrument has sound and light prompt function, which reminds the laboratory technician to end the experiment when it is over. The instrument adopts fuzzy control principle, expert PID self-tuning technology, and modular maintenance free structure, with stable and reliable control performance. Users only need to set the temperature control point through the instrument, and the instrument automatically achieves fixed-point temperature control (see attached figure). The intelligent time controller displays the test time and emits an audible and visual prompt signal at the end of the test to remind the laboratory technician to end the test.

Composition of BSY-133A Lubricating Oil Rust Prevention Performance Tester:
1. The power cord should be connected to a power supply of AC220V, 10A or above.
2. Place the thermometer in the designated position in the oil bath.
3. Inject mineral oil or silicone oil with an open flash point higher than 200 ℃.
4. Install the attached hole cover.
5. Turn on the power switch. Turn on the mixing switch. Set the temperature to 60 ℃. The specified temperature is 60 ± 0.1 ℃.

Main technical indicators:
1. Form: 4-hole desktop
2. Operating temperature: 60 ℃± 0.1 ℃
3. Temperature Control: Digital Temperature Control Meter Range: 0~80 ℃
4. Time display: 0~9999 (minutes, seconds, hours)
5. Temperature control accuracy: ± 0.1 ℃
6. Heater: 220V 1KW
7. Mixing motor: 15W x 4 units
8. Water bath motor: 20W
9. Mixing speed: 1000 ± 50rpm
10. Power supply: 220V 10A