SYD-0754 Adhesive Strength TesterDetailed product description：

It is a special instrument designed and manufactured according to the requirements of T0754 Test on Curing Time of Emulsified Asphalt Slurry Mixture in JTJ052-2000 Test Procedures for Asphalt and Asphalt Mixture of Highway Engineering, the industrial standard of the People's Republic of China. It is suitable for measuring the bonding degree of lotion and aggregate, and determining the open traffic time after the construction of slurry seal coat. It is the key equipment in the mix proportion test of emulsified asphalt slurry seal coat mixture.

1、 Main technical features
1. This instrument has a desktop structure, a novel design, a reasonable structure, and is easy to use.
2. The structural design of this instrument and the specifications and dimensions of the testing equipment comply with the requirements of T0754 standard.
3. This tester is easy to carry and can be used for indoor testing as well as on construction sites. It is widely applicable for various construction units and research institutes to analyze and determine the bonding degree between emulsified asphalt and aggregates.

2、 Main technical parameters and indicators
1. Rubber pad diameter: φ 28.6mm;
2. Rubber pad thickness: 6.4mm;
3. Rubber pad hardness: 60;
4. Maximum pressure: 1Mpa;
5. Circular trial mold: diameter 60mm x 6mm; φ60mmX10mm；
6. Torque wrench: 0-5N · m.
7. Working power supply: AC220V ± 10%; 50Hz。
3、 Select accessories
1. Balance: Weigh 500g, with a sensitivity not exceeding 0.1g;
2. Oven: with forced ventilation, temperature can be controlled at 60 ± 3 ℃;
3. Air compressor: Juba AU1511 air compressor (recommended).