CTS-1008 Digital Ultrasonic Flaw DetectorDetailed product description：

1、 CTS-1008 Digital Ultrasonic Flaw Detector Product Introduction
This product applies advanced analog and digital circuit technology and is an updated product developed based on the company's 50 years of experience in ultrasound instrument design and manufacturing. The instrument has excellent performance, complete and practical functions, small size, and weighs only 1.4kg. It can achieve image-based ultrasonic testing and is equipped with multiple interfaces to meet the various testing needs of users. The instrument can not only perform ultrasonic testing, but also serve as a square wave generator.

2、 Technical specifications of CTS-1008 digital ultrasonic flaw detector
Pulse emission: Square wave, emission voltage continuously adjustable from 25~250V, with a step size of 25V. Width continuously adjustable from 30~1000ns, with a step size of 5ns (special can be 0.25ns). When set at 400 Ω/200V, the double edge is less than 10ns, and it is automatically optimized to pulse excitation at high frequencies.
Working mode: single, double
Damping: 400, 80 Ω
Working frequency: divided into two levels: broadband and narrowband, broadband: 0.5-20MHz, narrowband: 1-4MHz
Gain: 0.0~110.0dB, step values: 0.1, 1.0, 2.0, 6.0dB; intelligent acceleration adjustment function is provided in the 0.1dB range
Sound speed range: 1000-15000m/s, continuously adjustable, built-in 30 commonly used material sound speed values
Detection range: 0.0~10000mm (steel longitudinal wave), continuously adjustable, minimum step value of 0.1mm
Detection methods: forward, negative, full wave, radio frequency (RF)
Alarm: Two hardware driven real-time alarm signals, optional: incoming wave alarm, loss of wave alarm, minimum thickness alarm, DAC curve alarm. Alarm signals can be selected from buzzer (sound) and light-emitting diode (light) modes
Display screen 5.7 "high-resolution TFT color LCD display screen, with a dot matrix of 640 × 480
Pulse shift: -7.5 to 3000 μ s
Probe zero value: 0-99.9 μ s
Pulse repetition frequency: 25-1000Hz, with automatic and manual adjustment modes
Vertical linear error: ≤ 3%
Horizontal linear error: ≤ 0.1%
Sensitivity margin: ≥ 63dB (200 Φ 2 flat bottomed hole)
Resolution: ≥ 36dB
Dynamic range: ≥ 32dB
Inhibition: (0-90)%, does not affect linearity and gain
RF output impedance: 50 Ω
Synchronous acquisition output mode: collector open circuit (OC gate)
Electric noise level:<10%
Interface: C6 probe interface (optional Q9 interface); USB HOST； LAN network interface
Power supply: large capacity lithium battery, no memory effect, continuous operation for more than 6 hours; Built in charger (external charger can be purchased separately); Communication: 220V
Environmental temperature: -30~50 ℃
Relative humidity: 20% to 95% RH
Weight: 1.4kg (including battery)
Volume (height x width x thickness): 240mm x 172mm x 44mm

3、 CTS-1008 Digital Ultrasonic Flaw Detector Product Features
Advanced circuit design, sampling frequency up to 640MHz, and display resolution of 640x480 ensure fast and accurate display and analysis of defect echo signals, and timely response to changes and details of various weak signals. The real-time and authenticity of echo signals are effectively guaranteed.
The latest development adopts the industry-leading adjustable square wave excitation technology in China, with a high-performance "square wave/pulse generator" built-in with adjustable options, achieving the best matching with the probe (able to excite the non inductive coil probe optimally). Excellent penetration and signal-to-noise ratio for detecting high attenuation materials or thick workpieces; And it has high resolution for detecting thin workpieces and composite materials.
The unique interface method allows the instrument to be used as an independent adjustable square wave generator, expanding the application space.
Rich interfaces with high-speed network interface (LAN) can provide remote data transmission and control, and multiple instruments can be connected to the network and used in parallel, greatly improving the functionality of the instruments. The high-speed main control USB interface can not only connect external storage devices such as USB flash drives and portable hard drives, allowing unrestricted waveform and data storage, but also external input devices such as USB mice for precise and efficient analysis of graphical waveforms.
Equipped with synchronous simulation and radio frequency (RF) waveform output interfaces, it can be used as a signal source for external data acquisition or probe testing.
Using a 5.7 "TFT (640x480) high-resolution color LCD display screen, the waveform details of the echo signal can be displayed finely, greatly improving the resolution, which is extremely beneficial for the analysis and judgment of defect properties.
Built in intelligent lithium battery charger. Automatic detection and display of batteries and DC power supply; Automatic switching between charging and power supply, dual protection of battery charging temperature, ensuring safety.
Humanized menu design, the first keyboard and universal knob adjustment method in China, making operation more convenient and efficient, and the inspection process more relaxed and comfortable. Chinese and English menu selection, multiple text input methods, making it easy to complete reports and output reports.
Built in multiple application software, covering different detection scenarios; Equipped with the "API 5UE Recommended Practice for Defect Size Quantification by the American Petroleum Organization" and "AWS D1.1 Welding Classification for Steel Structures" functional software, making inspection more convenient.
Automatically test probe frequency, intelligently optimize square wave width, and achieve optimal matching between probe, instrument, and tested workpiece.
Dynamic recording or short video playback, image-based thickness measurement, alarm, and continuous waveform storage functions, providing multiple waveform measurement modes.
When an alarm is triggered, the color of the waveform inside the gate changes, and the DAC curve alarm uses different color prompts.
The structure and appearance optimized by ergonomics have achieved a display screen of 5.7 inches, an internal battery, and an instrument weight of less than 1.4kg, which is unparalleled in domestic peers and extremely convenient to operate and carry.