T100 series peristaltic pump driverDetailed product description：

The T100 series peristaltic pump driver is a product series of small volume, simple structure, and easy control peristaltic pump drivers formed by the selection of multiple control methods with 57 stepper motors. Mainly used in equipment and instruments to achieve fluid transmission below 380mL/min. The control method adopts a dip switch combined with external signals. The external signals can be selected from 4-20mA, 0-5V, 0-10V, 0-10kHz, and products with RS485 communication control mode can be provided. Adopting a base plate and panel compatible installation method.

performance parameters

project		parameter
speed range		≤100rpm
Dimensions (length * width * height)		183mm*102mm*136mm
Relative humidity of working environment		＜80%
Working environment temperature		0℃～40℃
Applicable power supply		DC11.4V-25.2V，≤20W
Direction control		External input empty contact point. The contact is normally open, and the peristaltic pump runs clockwise; The contact is normally closed, and the peristaltic pump runs counterclockwise.
start-stop control		External input empty contact point. The contact is normally open, and the peristaltic pump is running; The contact is normally closed, and the peristaltic pump stops.
Dial switch speed control		16 speed BCD dip switch, 0 speed corresponds to external signal control, 1-F speed corresponds to 5, 10, 15, 20, 25, 30, 35, 40, 45, 50, 60, 70, 80, 90, 100 rpm.
External signal speed control (Optional)		4-20mA linearly corresponds to 0.1-100rpm 0-5V linearly corresponds to 0-100rpm; 0-10V linearly corresponds to 0-100rpm; 0-10kHz linearly corresponds to 0-100rpm;
Speed control resolution		0.1rpm
Communication address setting		5-digit DIP dip switch, communication address setting range is 1-30, with 31 being the broadcast address.
Communication baud rate setting		One DIP dip switch, available at 1200bps or 9600bps.