CPK-50 Differential pressure controllerDetailed product description：

The CPK-50 differential pressure controller adopts a diaphragm sensor, which is suitable for neutral gases such as air and gas, as well as liquid media such as lubricating oil and light fuel oil. The differential pressure setting of the controller is adjustable, with a range of 70-300Kpa.

Main technical performance of CPK-50 differential pressure controller
Switching element: OMRON micro switch
Environmental temperature: -25~80 ℃
Medium temperature: 0-80 ℃
Shell protection level: IP65
Repetitive error: 2%
Seismic performance: 40m/s2
Contact capacity: AC 220V 3A 500W (resistive)
Installation position: The H (high pressure chamber) interface is vertically downward (allowing for a tilt of 15 degrees)

Features: Ultra small design
specification
Switching difference is not adjustable

Differential pressure setting adjustment range (Kpa)	Switching difference not greater than (Kpa)	Maximum allowable working pressure Mpa	Pressure sensor material		Internal thread of interface
			shell	diaphragm
70-170	fifty	three point five	1Cr18Ni9Ti stainless steel	Nitrile rubber	M14×1.5
130-300	eighty

Adjustment of setting value: Input high voltage source at the high voltage (H) interface and low voltage source at the low voltage (L) interface.