SCX Magnetic filterDetailed product description：

SCX magnetic filters are mainly suitable for separating fine iron filings in liquid media to meet the process requirements of liquid media. Widely applicable to industries such as chemical, pharmaceutical, pigment, dye, food, metallurgy, ceramics, etc., this product has the advantages of strong magnetic force, good iron removal effect, and convenient cleaning of iron filings.

Working principle of SCX magnetic filter:
When the liquid enters the filter through the main pipe, solid impurity particles are blocked inside the filter. When the medium contains fine iron filings, they will be adsorbed on the magnetic rod sleeve, while clean fluid passes through the filter and is discharged from the filter outlet. When cleaning is needed, you can unscrew the drain plug at the bottom of the main pipe, drain the fluid, remove the flange cover, take out the filter screen for cleaning, and reinstall it. It can filter rust, sand particles, and small amounts of solid particles in sewage to protect the fittings on equipment pipelines from wear and blockage, and ensure the normal operation of equipment.

SCX magnetic filter features:
1. Using a permanent magnetic rod, the maximum surface magnetism can reach 12000 Gauss.
2. Strong magnetic force, good iron removal effect, convenient cleaning of iron filings, and other advantages.
3. It can remove tiny particles that are not visible to the naked eye, ranging from 0.5 to 60 μ m.
4. The surface smoothness of the bar magnet can meet the requirements of food grade.
5. Its magnetic source is made of high-performance neodymium iron boron permanent magnet material, with a magnetic force 5-20 times higher than that of similar conventional magnetic materials (ferrite or aluminum nickel cobalt permanent magnet materials).

Technical Parameters		Specification size mm
Model	SCX	Specification	L	H
Main material	304 304L 316 316L	DN25	125	160
Magnetic rod strength	10000GS	DN32	one hundred and forty-five	one hundred and eighty
gasket	Nitrile rubber PTFE	DN40	one hundred and sixty-four	195
bolt and nut	304  316L	DN50	one hundred and eighty-six	215
Operating Temperature	5~150℃	DN80	two hundred and seventy-three	two hundred and eighty-five
connection method	Flange threaded clamp	DN100	three hundred and six	three hundred
Flange Standard	GB HG JIS ANSI DIN	DN150	four hundred	three hundred and eighty
Nominal Pressure	0.6~4.0Mpa 150~300LB	DN200	four hundred and seventy	four hundred and eighty
Manufacturing Standard	HGJ532-91 GB150-98	DN250	four hundred and eighty	five hundred and forty-five