S-50 Type Switching Power SupplyDetailed product description：

model performance	S-50-5	S-50-12	S-50-15	S-50-24
DC output voltage	5V	12V	15V	24V
Output voltage tolerance (Note 2)	±2%	±1%	±1%	±1%
Rated output current	10A	4.2A	3.4A	2.1A
Output current range	0-10A	0-4.2A	0-3.4A	0-2.1A
Ripple and noise (Note 3)	75mVp-p	100mVp-p	100mVp-p	100mVp-p
Stability of incoming line (Note 4)	±0.5%	±0.5%	±0.5%	±0.5%
Load stability (Note 5)	±1%	±0.5%	±0.5%	±0.5%
DC output power	50W	50.4W	50.4W	51W
efficiency	71%	78%	78%	82%
Adjustable range of DC voltage	+10,-5%	±10%	±10%	±10%
Input voltage range	85-132VAC/170-264VAC select 47-63Hz; 240-370VDC
input current	1.3A/115V 0.65A/230V
inrush current	Cold start current: 18A/115V, 36A/230V
leakage current	< 0.5mA/240VAC
overload protection	115%~150% current limit reset: automatic recovery
overvoltage protection	……
High-temperature protection	……
temperature coefficient	±0.03%/℃(0～50℃)
Start, rise, and hold time	200ms,100ms,30ms
seismic resistance	10-500Hz, 2G 10min./1 cycle, duration 60 minutes, each axis
pressure resistance	Input/output room: 1.5KVAC, input and enclosure: 1.5KVAC, output and enclosure: 0.5KVAC
Isolation resistor	Between input and output, input and casing, output and casing: 500VDC/100M Ω
Working temperature and humidity	-10℃～+50℃，20%～90%RH
Storage temperature, temperature	-20℃～+85℃,10%～95RH
Overall dimensions	159*97*38mm
weight	0.5Kg
safety standards	Meets UL1012
EMC standard	EN55022,EN55024,EN61000
Other Performance	……

Note:
1. The above parameter testing conditions are: 230VAC input, rated load, 25 ℃ 70% RH. Humidity.
2. Tolerance: including set tolerance, line stability, and load stability (Note 5).
3. Ripple test: Use A12 "twisted pair for 20MHz and short-circuit with 0.1uF&47uF capacitors for interruption.
4. Incoming voltage stability test: the lowest voltage to the highest voltage of the incoming line at full load.
5. Load stability test: load from 0% to 100%.